On Sat, 09 Oct 2021 12:43:09 +0200, David Heidelberg wrote:This sounds correct.
Convert fan devices connected to GPIOs to the YAML syntax.
Signed-off-by: David Heidelberg <david@xxxxxxx>
---
.../devicetree/bindings/hwmon/gpio-fan.txt | 41 -----------
.../devicetree/bindings/hwmon/gpio-fan.yaml | 69 +++++++++++++++++++
2 files changed, 69 insertions(+), 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/hwmon/gpio-fan.txt
create mode 100644 Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.
Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.
Full log is available here: https://patchwork.ozlabs.org/patch/1538743
fan: 'gpio-fan,speed-map' is a required property
arch/arm/boot/dts/kirkwood-nas2big.dt.yaml
arch/arm/boot/dts/kirkwood-net2big.dt.yaml
Look like two arrays instead one expected.
gpio-fan: gpio-fan,speed-map: 'anyOf' conditional failed, one must be fixed:
arch/arm/boot/dts/gemini-dlink-dir-685.dt.yaml
arch/arm/boot/dts/gemini-dlink-dns-313.dt.yaml
gpio_fan: gpio-fan,speed-map: 'anyOf' conditional failed, one must be fixed:Look like two arrays instead one expected.
arch/arm/boot/dts/am57xx-beagle-x15.dt.yaml
arch/arm/boot/dts/am57xx-beagle-x15-revb1.dt.yaml
arch/arm/boot/dts/am57xx-beagle-x15-revc.dt.yaml
Look like three arrays instead one expected.
gpio-fan: gpio-fan,speed-map: 'oneOf' conditional failed, one must be fixed:
arch/arm/boot/dts/gemini-dlink-dir-685.dt.yaml
arch/arm/boot/dts/gemini-dlink-dns-313.dt.yaml
gpio_fan: gpio-fan,speed-map: 'oneOf' conditional failed, one must be fixed:Look like two arrays instead one expected.
arch/arm/boot/dts/am57xx-beagle-x15.dt.yaml
arch/arm/boot/dts/am57xx-beagle-x15-revb1.dt.yaml
arch/arm/boot/dts/am57xx-beagle-x15-revc.dt.yaml