[PATCH v4 00/48] TI AM437X ADC1

From: Miquel Raynal
Date: Tue Sep 28 2021 - 09:31:51 EST


Hello,

This is a (fairly big) series bringing support of AM437X ADC1.
On TI AM33XX SoCs family there is an ADC that can also be connected to a
touchscreen. This hardware has been extended and is present on certain
SoCs from the AM437X family. In particular, the touchscreen has been
replaced by a magnetic card reader. In both cases, the representation is
an MFD device with two children:
* on AM33XX: the touchscreen controller and the ADC
* on AM437X: the magnetic stripe reader and the ADC

This series really targets small and atomic changes so that the overall
review is eased, even though it leads to a lot of rather small patches.
Here are the steps:
* Supporting the missing clock
* Translating a single text file containing the description for the
MFD, the touchscreen and the ADC into three independent yaml files.
* Cleaning/preparing the MFD driver.
* Supporting ADC1 in the MFD driver.
* Cleaning/preparing of the ADC driver.
* Supporting ADC1 in the ADC driver.
* Updating various device trees.

Here is the full series again, almost reviewed and acked entirely.
The clock patch has been acked, the ADC patches as well, so we expect
the series to go through the MFD tree if the maintainers agree with it.

Thanks,
Miquèl

Changes in v4:
* R-by/A-by tags added from Tony, Dmitry and Jonathan.
* Inverted the order of three patches following Jonathan's advice:
removing the ENB macro (and related definitions) should be done first,
in order to avoid further updates of these useless macros. This lead
to the addition of a new patch to first do the removal (which was part
of patch "Drop useless definitions from the header" in the first
place).
* Updated the naming of the MFD driver data structure as discussed with
Lee.
* Used the "magnetic stripe reader" wording when appropriate.
* Created a helper using the compatible to determine if there is a
touchscreen or a magnetic stripe reader in this version of the
hardware.

Changes in v3:
* Rebased on top of v5.15-rc1.
* R-by/A-by tags added.
* Light reordering to let the of_put_node() fix to be applied more easily
* Dropped a patch made useless because of the previous reordering
* Explained how the tscadc->ctrl variable was used.
* Fixed a couple of typos.
* Included the change for the HZ macro.
* Went further in the BIT()/FIELD_PREP() cleanup.
* Added maximum definitions for sample delay/open delay.
* Removed useless definitions.
* Fixed a couple of rebase conflicts (the series was not bisectable).

Changes in v2:
* Added various R-by/A-by tags.
* Various typos & style fixes.
[Bindings]
* Included the missing ti,am654-tscadc compatible.
* Reworded the compatible lines as requested by Jonathan.
* Reworded the bindings content a little bit as advised by Rob (subnodes
being objects, MFD descriptions provided once, status and unused
labels removed).
[SPDX changes]
* Mentioned that the license macro and the license text matched.
* Also added an SPDX tag in the MFD header.
[MFD header]
* Used the BIT(), GENMASK() and PREP_FIELD() macros when relevant.
[MFD driver]
* Did not reordered the variables declared on the probe stack as advised
by Jonathan.
* Added missing of_node_put() calls.
* Moved the patch changing the place where the main structure is
allocated to directly precede the patch using this change.
* Fixed the driver data wiring (bug happening between ex patches 16 and
28).
* Added a commit just to explain the reordering of the register writes
during initialization/resume.
* Explained the check about 'use_tsc' in the commit message.
* Added a link to the TRM in a commit message referencing it.
* Removed the use of the ti,tracks property, used a constant value
instead.
* Dropped the error check when retrieving the "wrong" DT property
(coordiante-readouts) which is unused.


Miquel Raynal (48):
clk: ti: am43xx: Add clkctrl data for am43xx ADC1
dt-bindings: mfd: ti,am3359-tscadc: Add a yaml description for this
MFD
dt-bindings: touchscreen: ti,am3359-tsc: New yaml description
dt-bindings: iio: adc: ti,am3359-adc: New yaml description
dt-bindings: touchscreen: ti,am3359-tsc: Remove deprecated text file
dt-bindings: mfd: ti,am3359-tscadc: Describe am4372 MFD compatible
dt-bindings: iio: adc: ti,am3359-adc: Describe am4372 ADC compatible
mfd: ti_am335x_tscadc: Ensure a balanced number of node get/put
mfd: ti_am335x_tscadc: Replace license text with SPDX tag
mfd: ti_am335x_tscadc: Fix style
mfd: ti_am335x_tscadc: Drop extra spacing when declaring stack
variables
mfd: ti_am335x_tscadc: Get rid of useless gotos
mfd: ti_am335x_tscadc: Reword the comment explaining the dividers
mfd: ti_am335x_tscadc: Don't search the tree for our clock
mfd: ti_am335x_tscadc: Simplify divisor calculation
mfd: ti_am335x_tscadc: Move the driver structure allocation earlier
mfd: ti_am335x_tscadc: Use driver data
mfd: ti_am335x_tscadc: Mimic the probe from resume()
mfd: ti_am335x_tscadc: Drop useless variables from the driver
structure
mfd: ti_am335x_tscadc: Always provide an idle configuration
mfd: ti_am335x_tscadc: Reorder the initialization steps
mfd: ti_am335x_tscadc: Gather the ctrl register logic in one place
mfd: ti_am335x_tscadc: Replace the header license text with SPDX tag
mfd: ti_am335x_tscadc: Fix header spacing
mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro
mfd: ti_am335x_tscadc: Drop unused definitions from the header
mfd: ti_am335x_tscadc: Use BIT(), GENMASK() and FIELD_PREP() when
relevant
mfd: ti_am335x_tscadc: Clarify the maximum values for DT entries
mfd: ti_am335x_tscadc: Drop useless definitions from the header
mfd: ti_am335x_tscadc: Rename the subsystem enable macro
mfd: ti_am335x_tscadc: Add TSC prefix in certain macros
mfd: ti_am335x_tscadc: Rename a variable
mfd: ti_am335x_tscadc: Fix an error message
mfd: ti_am335x_tscadc: Add a boolean to clarify the presence of a
touchscreen
mfd: ti_am335x_tscadc: Introduce a helper to deal with the type of
hardware
mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support
mfd: ti_am335x_tscadc: Support the correctly spelled DT property
iio: adc: ti_am335x_adc: Wait the idle state to avoid stalls
iio: adc: ti_am335x_adc: Replace license text with SPDX tag
iio: adc: ti_am335x_adc: Fix style
iio: adc: ti_am335x_adc: Get rid of useless gotos
iio: adc: ti_am335x_adc: Gather the checks on the delays
iio: adc: ti_am335x_adc: Add a unit to the timeout delay
iio: adc: ti_am335x_adc: Add the scale information
iio: adc: ti_am335x_adc: Add the am437x compatible
ARM: dts: am437x-cm-t43: Use a correctly spelled DT property
ARM: dts: am43xx: Describe the magnetic reader/ADC1 hardware module
ARM: dts: am437x-gp-evm: enable ADC1

.../bindings/iio/adc/ti,am3359-adc.yaml | 70 ++++++
.../input/touchscreen/ti,am3359-tsc.yaml | 76 ++++++
.../bindings/input/touchscreen/ti-tsc-adc.txt | 91 -------
.../bindings/mfd/ti,am3359-tscadc.yaml | 84 +++++++
arch/arm/boot/dts/am437x-cm-t43.dts | 2 +-
arch/arm/boot/dts/am437x-gp-evm.dts | 8 +
arch/arm/boot/dts/am437x-l4.dtsi | 31 ++-
arch/arm/boot/dts/am43xx-clocks.dtsi | 7 +
drivers/clk/ti/clk-43xx.c | 1 +
drivers/iio/adc/ti_am335x_adc.c | 220 ++++++++++-------
drivers/mfd/ti_am335x_tscadc.c | 233 ++++++++++--------
include/dt-bindings/clock/am4.h | 1 +
include/linux/mfd/ti_am335x_tscadc.h | 119 +++++----
13 files changed, 593 insertions(+), 350 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
create mode 100644 Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml

--
2.27.0