[PATCH v5 17/19] staging: r8188eu: Shorten calls chain of rtw_read8/16/32()

From: Fabio M. De Francesco
Date: Wed Sep 15 2021 - 08:45:20 EST


Shorten the calls chain of rtw_read8/16/32() down to the actual reads.
For this purpose unify the three usb_read8/16/32 into the new
usb_read(); make the latter parameterizable with 'size'; embed most of
the code of usbctrl_vendorreq() into usb_read() and use in it the new
usb_control_msg_recv() API of USB Core.

Suggested-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Co-developed-by: Pavel Skripkin <paskripkin@xxxxxxxxx>
Signed-off-by: Pavel Skripkin <paskripkin@xxxxxxxxx>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@xxxxxxxxx>
---
drivers/staging/r8188eu/hal/usb_ops_linux.c | 60 +++++++++++++++++++--
1 file changed, 57 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/r8188eu/hal/usb_ops_linux.c b/drivers/staging/r8188eu/hal/usb_ops_linux.c
index b48d8b5e95fd..28d639ba8e4e 100644
--- a/drivers/staging/r8188eu/hal/usb_ops_linux.c
+++ b/drivers/staging/r8188eu/hal/usb_ops_linux.c
@@ -89,13 +89,67 @@ static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1
return status;
}

+static int usb_read(struct intf_hdl *intfhdl, u16 addr, void *data, u8 size)
+{
+ struct adapter *adapt = intfhdl->padapter;
+ struct dvobj_priv *dvobjpriv = adapter_to_dvobj(adapt);
+ struct usb_device *udev = dvobjpriv->pusbdev;
+ int status;
+ u8 *io_buf; /* Pointer to I/O buffer */
+
+ if (adapt->bSurpriseRemoved || adapt->pwrctrlpriv.pnp_bstop_trx)
+ return -EPERM;
+
+ mutex_lock(&dvobjpriv->usb_vendor_req_mutex);
+
+ io_buf = dvobjpriv->usb_vendor_req_buf;
+
+ status = usb_control_msg_recv(udev, 0, REALTEK_USB_VENQT_CMD_REQ,
+ REALTEK_USB_VENQT_READ, addr,
+ REALTEK_USB_VENQT_CMD_IDX, io_buf,
+ size, RTW_USB_CONTROL_MSG_TIMEOUT,
+ GFP_KERNEL);
+
+ if (status == -ESHUTDOWN ||
+ status == -ENODEV ||
+ status == -ENOENT) {
+ /*
+ * device or controller has been disabled due to
+ * some problem that could not be worked around,
+ * device or bus doesn’t exist, endpoint does not
+ * exist or is not enabled.
+ */
+ adapt->bSurpriseRemoved = true;
+ goto mutex_unlock;
+ }
+
+ if (status < 0) {
+ GET_HAL_DATA(adapt)->srestpriv.wifi_error_status =
+ USB_VEN_REQ_CMD_FAIL;
+
+ if (rtw_inc_and_chk_continual_urb_error(dvobjpriv))
+ adapt->bSurpriseRemoved = true;
+
+ goto mutex_unlock;
+ }
+
+ rtw_reset_continual_urb_error(dvobjpriv);
+ memcpy(data, io_buf, size);
+
+mutex_unlock:
+ mutex_unlock(&dvobjpriv->usb_vendor_req_mutex);
+
+ return status;
+}
+
u8 rtw_read8(struct adapter *adapter, u32 addr)
{
struct io_priv *io_priv = &adapter->iopriv;
struct intf_hdl *intfhdl = &io_priv->intf;
u16 address = addr & 0xffff;
u8 data;
- usbctrl_vendorreq(intfhdl, address, &data, 1, REALTEK_USB_VENQT_READ);
+
+ usb_read(intfhdl, address, &data, 1);

return data;
}
@@ -107,7 +161,7 @@ u16 rtw_read16(struct adapter *adapter, u32 addr)
u16 address = addr & 0xffff;
__le16 data;

- usbctrl_vendorreq(intfhdl, address, &data, 2, REALTEK_USB_VENQT_READ);
+ usb_read(intfhdl, address, &data, 2);

return le16_to_cpu(data);
}
@@ -119,7 +173,7 @@ u32 rtw_read32(struct adapter *adapter, u32 addr)
u16 address = addr & 0xffff;
__le32 data;

- usbctrl_vendorreq(intfhdl, address, &data, 4, REALTEK_USB_VENQT_READ);
+ usb_read(intfhdl, address, &data, 4);

return le32_to_cpu(data);
}
--
2.33.0