[PATCH v2 0/3] Add support for IDO-SBC2D06-V1B-22W

From: Romain Perier
Date: Tue Sep 14 2021 - 14:42:13 EST


IDO-SOM2D01 is an ultra-small SOM module based on SigmaStar SSD201/SSD202
SoC (ARM Cortex A7 core). The module integrates WIFI, NAND and PM
circuits on a PCB area of 2.95CM x 2.95CM. The SoC integrates 128 MB of
DDR3 on-chip.

IDO-SBC2D06-V1B-22W is an dual-ethernet SBC powered by a IDO-SOM2D01,
that embeds a MicroSD card slot, 4-lane MIPI DSI connector for 4-inch
RGB565 display or 7-inch RGB888 display, Dual 10/100M Ethernet ports,
and more.

This series adds support for this SOM and this boards.

Changes since v1:
- Removed the commit that adds me as co-maintainer (merged)
- Fixed alphabetic order in dt-bindings
- Moved the commit that adds vendor prefix before adding the DT for the
board (re-ordered commits)
- Removed unneeded space

Romain Perier (3):
ARM: mstar: Mark timer with arm,cpu-registers-not-fw-configured
dt-bindings: add vendor prefix for Wireless Tag
ARM: dts: mstar: Add the Wireless Tag IDO-SBC2D06-V1B-22W

.../devicetree/bindings/arm/mstar/mstar.yaml | 2 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 ++
arch/arm/boot/dts/Makefile | 1 +
.../dts/mstar-infinity2m-ssd201-som2d01.dtsi | 20 +++++++++++++
...sd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts | 23 +++++++++++++++
...ity2m-ssd202d-wirelesstag-ido-som2d01.dtsi | 28 +++++++++++++++++++
arch/arm/boot/dts/mstar-v7.dtsi | 1 +
7 files changed, 77 insertions(+)
create mode 100644 arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
create mode 100644 arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
create mode 100644 arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi

--
2.33.0