[PATCH 5.10 229/236] ARM: dts: at91: add pinctrl-{names, 0} for all gpios

From: Greg Kroah-Hartman
Date: Mon Sep 13 2021 - 09:50:51 EST


From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>

commit bf781869e5cf3e4ec1a47dad69b6f0df97629cbd upstream.

Add pinctrl-names and pinctrl-0 properties on controllers that claims to
use pins to avoid failures due to
commit 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
and also to avoid using pins that may be claimed my other IPs.

Fixes: b7c2b6157079 ("ARM: at91: add Atmel's SAMA5D3 Xplained board")
Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210727074006.1609989-1-claudiu.beznea@xxxxxxxxxxxxx
Cc: <stable@xxxxxxxxxxxxxxx> # v5.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/at91-sam9x60ek.dts | 16 ++++++++++++++-
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 29 ++++++++++++++++++++++++++++
arch/arm/boot/dts/at91-sama5d4_xplained.dts | 19 ++++++++++++++++++
3 files changed, 63 insertions(+), 1 deletion(-)

--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -92,6 +92,8 @@

leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
status = "okay"; /* Conflict with pwm0. */

red {
@@ -537,6 +539,10 @@
AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA19 DAT2 periph A with pullup */
AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA20 DAT3 periph A with pullup */
};
+ pinctrl_sdmmc0_cd: sdmmc0_cd {
+ atmel,pins =
+ <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
};

sdmmc1 {
@@ -569,6 +575,14 @@
AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
+
+ leds {
+ pinctrl_gpio_leds: gpio_leds {
+ atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
}; /* pinctrl */

&pwm0 {
@@ -580,7 +594,7 @@
&sdmmc0 {
bus-width = <4>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sdmmc0_default>;
+ pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
status = "okay";
cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
disable-wp;
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -57,6 +57,8 @@
};

spi0: spi@f0004000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0_cs>;
cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
status = "okay";
};
@@ -169,6 +171,8 @@
};

spi1: spi@f8008000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_cs>;
cs-gpios = <&pioC 25 0>;
status = "okay";
};
@@ -248,6 +252,26 @@
<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
+
+ pinctrl_gpio_leds: gpio_leds_default {
+ atmel,pins =
+ <AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_spi0_cs: spi0_cs_default {
+ atmel,pins =
+ <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_spi1_cs: spi1_cs_default {
+ atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
+ atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
};
};
};
@@ -339,6 +363,8 @@

vcc_mmc0_reg: fixedregulator_mmc0 {
compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
regulator-name = "mmc0-card-supply";
regulator-min-microvolt = <3300000>;
@@ -362,6 +388,9 @@

leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+ status = "okay";

d2 {
label = "d2";
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -90,6 +90,8 @@
};

spi1: spi@fc018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0_cs>;
cs-gpios = <&pioB 21 0>;
status = "okay";
};
@@ -147,6 +149,19 @@
atmel,pins =
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
+ pinctrl_spi0_cs: spi0_cs_default {
+ atmel,pins =
+ <AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_gpio_leds: gpio_leds_default {
+ atmel,pins =
+ <AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
+ atmel,pins =
+ <AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
};
};
};
@@ -252,6 +267,8 @@

leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
status = "okay";

d8 {
@@ -278,6 +295,8 @@

vcc_mmc1_reg: fixedregulator_mmc1 {
compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
regulator-name = "VDD MCI1";
regulator-min-microvolt = <3300000>;