[PATCH v4 08/24] drm/bridge: anx7625: Register and attach our DSI device at probe

From: Maxime Ripard
Date: Fri Sep 10 2021 - 06:13:21 EST


In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
drivers/gpu/drm/bridge/analogix/anx7625.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 4adeb2bad03a..d0317651cd75 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -1367,12 +1367,6 @@ static int anx7625_bridge_attach(struct drm_bridge *bridge,
return -ENODEV;
}

- err = anx7625_attach_dsi(ctx);
- if (err) {
- DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", err);
- return err;
- }
-
if (ctx->pdata.panel_bridge) {
err = drm_bridge_attach(bridge->encoder,
ctx->pdata.panel_bridge,
@@ -1845,10 +1839,24 @@ static int anx7625_i2c_probe(struct i2c_client *client,
platform->bridge.type = DRM_MODE_CONNECTOR_eDP;
drm_bridge_add(&platform->bridge);

+ ret = anx7625_attach_dsi(platform);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", ret);
+ goto unregister_bridge;
+ }
+
DRM_DEV_DEBUG_DRIVER(dev, "probe done\n");

return 0;

+unregister_bridge:
+ drm_bridge_remove(&platform->bridge);
+
+ if (!platform->pdata.low_power_mode)
+ pm_runtime_put_sync_suspend(&client->dev);
+
+ anx7625_unregister_i2c_dummy_clients(platform);
+
free_wq:
if (platform->workqueue)
destroy_workqueue(platform->workqueue);
--
2.31.1