RE: [PATCH net] ice: Correctly deal with PFs that do not support RDMA

From: Ertman, David M
Date: Thu Sep 09 2021 - 18:02:20 EST


> -----Original Message-----
> From: Jakub Kicinski <kuba@xxxxxxxxxx>
> Sent: Thursday, September 9, 2021 2:49 PM
> To: Ertman, David M <david.m.ertman@xxxxxxxxx>
> Cc: davem@xxxxxxxxxxxxx; yongxin.liu@xxxxxxxxxxxxx; Saleem, Shiraz
> <shiraz.saleem@xxxxxxxxx>; Nguyen, Anthony L
> <anthony.l.nguyen@xxxxxxxxx>; netdev@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; Brandeburg, Jesse <jesse.brandeburg@xxxxxxxxx>;
> intel-wired-lan@xxxxxxxxxxxxxxxx
> Subject: Re: [PATCH net] ice: Correctly deal with PFs that do not support
> RDMA
>
> On Thu, 9 Sep 2021 01:56:12 -0700 Dave Ertman wrote:
> > There are two cases where the current PF does not support RDMA
> > functionality. The first is if the NVM loaded on the device is set
> > to not support RDMA (common_caps.rdma is false). The second is if
> > the kernel bonding driver has included the current PF in an active
> > link aggregate.
> >
> > When the driver has determined that this PF does not support RDMA, then
> > auxiliary devices should not be created on the auxiliary bus. Without
> > a device on the auxiliary bus, even if the irdma driver is present, there
> > will be no RDMA activity attempted on this PF.
> >
> > Currently, in the reset flow, an attempt to create auxiliary devices is
> > performed without regard to the ability of the PF. There needs to be a
> > check in ice_aux_plug_dev (as the central point that creates auxiliary
> > devices) to see if the PF is in a state to support the functionality.
> >
> > When disabling and re-enabling RDMA due to the inclusion/removal of the
> PF
> > in a link aggregate, we also need to set/clear the bit which controls
> > auxiliary device creation so that a reset recovery in a link aggregate
> > situation doesn't try to create auxiliary devices when it shouldn't.
> >
> > Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA")
> > Reported-by: Yongxin Liu <yongxin.liu@xxxxxxxxxxxxx>
> > Signed-off-by: Dave Ertman <david.m.ertman@xxxxxxxxx>
> > Signed-off-by: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
>
> Why CC lkml but not CC RDMA or Leon?

Oversight on my part - thought I had cut-n-pasted all of the address
in my git send-email command. Will send again and correct issue