Re: [PATCH] cpufreq: intel_pstate: Override parameters if HWP forced by BIOS

From: Srinivas Pandruvada
Date: Thu Sep 09 2021 - 02:33:36 EST


On Wed, 2021-09-08 at 20:48 -0700, Doug Smythies wrote:
> If HWP has been already been enabled by BIOS, it may be
> necessary to override some kernel command line parameters.
> Once it has been enabled it requires a reset to be disabled.
>
> Signed-off-by: Doug Smythies <dsmythies@xxxxxxxxx>
> ---
>  drivers/cpufreq/intel_pstate.c | 22 ++++++++++++++++------
>  1 file changed, 16 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/cpufreq/intel_pstate.c
> b/drivers/cpufreq/intel_pstate.c
> index bb4549959b11..073bae5d4498 100644
> --- a/drivers/cpufreq/intel_pstate.c
> +++ b/drivers/cpufreq/intel_pstate.c
> @@ -3267,7 +3267,7 @@ static int __init intel_pstate_init(void)
>                  */
>                 if ((!no_hwp && boot_cpu_has(X86_FEATURE_HWP_EPP)) ||
>                     intel_pstate_hwp_is_enabled()) {
> -                       hwp_active++;
> +                       hwp_active = 1;
Why this change?

>                         hwp_mode_bdw = id->driver_data;
>                         intel_pstate.attr = hwp_cpufreq_attrs;
>                         intel_cpufreq.attr = hwp_cpufreq_attrs;
> @@ -3347,17 +3347,27 @@ device_initcall(intel_pstate_init);
>  
>  static int __init intel_pstate_setup(char *str)
>  {
> +       /*
> +        * If BIOS is forcing HWP, then parameter
> +        * overrides might be needed. Only print
> +        * the message once, and regardless of
> +        * any overrides.
> +        */
> +       if(!hwp_active 
This part of code is from early_param, Is it possible that
hwp_active is not 0?

> && boot_cpu_has(X86_FEATURE_HWP))
> +               if(intel_pstate_hwp_is_enabled()){
> +                       pr_info("HWP enabled by BIOS\n");
> +                       hwp_active = 1;
> +               }
>         if (!str)
>                 return -EINVAL;
>  
> -       if (!strcmp(str, "disable"))
> +       if (!strcmp(str, "disable") && !hwp_active)
>                 no_load = 1;
> -       else if (!strcmp(str, "active"))
> +       if (!strcmp(str, "active"))
>                 default_driver = &intel_pstate;
> -       else if (!strcmp(str, "passive"))
> +       if (!strcmp(str, "passive"))
>                 default_driver = &intel_cpufreq;

Why "else if" changed to "if" ?


Thanks,
Srinivas

> -
> -       if (!strcmp(str, "no_hwp")) {
> +       if (!strcmp(str, "no_hwp") && !hwp_active) {
>                 pr_info("HWP disabled\n");
>                 no_hwp = 1;
>         }