Re: [PATCH v3 1/2] drivers: bus: simple-pm-bus: Add support for probing simple bus only devices

From: Rob Herring
Date: Wed Sep 08 2021 - 20:16:13 EST


On Tue, Sep 7, 2021 at 2:01 AM Saravana Kannan <saravanak@xxxxxxxxxx> wrote:
>
> On Mon, Sep 6, 2021 at 12:54 AM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> >
> > Hi Saravana,
> >
> > Thanks for your patch!
> >
> > CC linux-pm, Lee (mfd)
> >
> > On Sat, Sep 4, 2021 at 2:05 AM Saravana Kannan <saravanak@xxxxxxxxxx> wrote:
> > > fw_devlink could end up creating device links for bus only devices.
> > > However, bus only devices don't get probed and can block probe() or
> > > sync_state() [1] call backs of other devices. To avoid this, probe these
> > > devices using the simple-pm-bus driver.
> > >
> > > However, there are instances of devices that are not simple buses (they
> > > get probed by their specific drivers) that also list the "simple-bus"
> > > (or other bus only compatible strings) in their compatible property to
> > > automatically populate their child devices. We still want these devices
> > > to get probed by their specific drivers. So, we make sure this driver
> > > only probes devices that are only buses.
> >
> > Note that this can also be the case for buses declaring compatibility
> > with "simple-pm-bus". However, at the moment, none of such device
> > nodes in upstream DTS files have device-specific drivers.
>
> Not sure about mfd, but I want to make sure we don't confuse busses
> (which are typically added to a class) with these "simple bus" devices
> that are added to platform_bus. Also if these other buses are actually
> causing an issue, then then should implement their own stub driver or
> use try patch[2] if they are added to classes (devices on classes
> don't probe)
>
> [2] - https://lore.kernel.org/lkml/20210831224510.703253-1-saravanak@xxxxxxxxxx/
>
> >
> > > [1] - https://lore.kernel.org/lkml/CAPDyKFo9Bxremkb1dDrr4OcXSpE0keVze94Cm=zrkOVxHHxBmQ@xxxxxxxxxxxxxx/
> > > Signed-off-by: Saravana Kannan <saravanak@xxxxxxxxxx>
> > > Tested-by: Saravana Kannan <saravanak@xxxxxxxxxx>
> >
> > > --- a/drivers/bus/simple-pm-bus.c
> > > +++ b/drivers/bus/simple-pm-bus.c
> > > @@ -13,11 +13,26 @@
> > > #include <linux/platform_device.h>
> > > #include <linux/pm_runtime.h>
> > >
> > > -
> > > static int simple_pm_bus_probe(struct platform_device *pdev)
> > > {
> > > - const struct of_dev_auxdata *lookup = dev_get_platdata(&pdev->dev);
> > > - struct device_node *np = pdev->dev.of_node;
> > > + const struct device *dev = &pdev->dev;
> > > + const struct of_dev_auxdata *lookup = dev_get_platdata(dev);
> > > + struct device_node *np = dev->of_node;
> > > + const struct of_device_id *match;
> > > +
> > > + match = of_match_device(dev->driver->of_match_table, dev);
> > > +
> > > + /*
> > > + * These are transparent bus devices (not simple-pm-bus matches) that
> > > + * have their child nodes populated automatically. So, don't need to
> > > + * do anything more.
> > > + */
> > > + if (match && match->data) {
> > > + if (of_property_match_string(np, "compatible", match->compatible) == 0)
> >
> > Does this work as expected? Having multiple compatible values in a
> > device node does not guarantee there exist a separate driver for any
> > of the device-specific compatible values.
>
> Right, and if they are platform devices that are equivalent to
> simple-bus (meaning, they don't do anything in Linux and just have
> their devices populated) we can add those to this list too.

I think this needs to be a list of compatibles we have drivers for
instead. A more specific compatible that the OS doesn't understand
shouldn't cause a change in behavior and adding one would. I expect it
to be a short list.

We are guaranteed that of_match_device() returns the best match in the
match list, so we really just need 1 list here with a boolean to bail
or not.

> > > + return 0;
> > > + else
> > > + return -ENODEV;
> >
> > So if we get here, as both branches use "return", we skip the
> > pm_runtime_enable() and of_platform_populate() below:
> > - of_platform_populate() is handled for these buses by
> > of_platform_default_populate(), so that's OK,
> > - I'm wondering if any of the simple-mfd sub-devices use Runtime
> > PM, but currently fail to save power because pm_runtime_enable()
> > is never called for the MFD container, just like with simple-bus...
>
> But this doesn't affect simple-mfd though.
>
> >
> > > + }
> > >
> > > dev_dbg(&pdev->dev, "%s\n", __func__);
> > >
> > > @@ -31,14 +46,25 @@ static int simple_pm_bus_probe(struct platform_device *pdev)
> > >
> > > static int simple_pm_bus_remove(struct platform_device *pdev)
> > > {
> > > + const void *data = of_device_get_match_data(&pdev->dev);
> > > +
> > > + if (data)
> > > + return 0;
> > > +
> > > dev_dbg(&pdev->dev, "%s\n", __func__);
> > >
> > > pm_runtime_disable(&pdev->dev);
> > > return 0;
> > > }
> > >
> > > +#define ONLY_BUS ((void *) 1) /* Match if the device is only a bus. */
> > > +
> > > static const struct of_device_id simple_pm_bus_of_match[] = {
> > > { .compatible = "simple-pm-bus", },
> > > + { .compatible = "simple-bus", .data = ONLY_BUS },
> > > + { .compatible = "simple-mfd", .data = ONLY_BUS },
> > > + { .compatible = "isa", .data = ONLY_BUS },
> >
> > #ifdef CONFIG_ARM_AMBA ?
>
> Not needed? If CONFIG_ARM_AMBA isn't enabled, the device wouldn't be
> created in the first place.
>
> >
> > > + { .compatible = "arm,amba-bus", .data = ONLY_BUS },
> > > { /* sentinel */ }
> >
> > This is now (almost[*]) the same as of_default_bus_match_table[]
> > in drivers/of/platform.c. Perhaps it can be shared?
>
> I wanted this table to be expandable as needed. That's why I'm
> intentionally not using of_default_bus_match_table[].
>
> >
> > [*] Especially if "simple-pm-bus" and "simple-bus" would be treated
> > the same.
>
> They are not treated the same way.

I think it would be better if they were. IOW, the core code stops
descending into simple-bus, etc. nodes and they are populated here.
Then we just get rid of of_default_bus_match_table.

That could cause some issues with init ordering. As I recall the at91
gpio and pinctrl drivers are sensitive to this. The default call to
of_platform_populate doesn't work on those systems because the devices
get created later than when their machine specific call happens. It
may have been a case of a parent probe assuming a child probe
completed after of_platform_populate returns (also a problem for Qcom
with DWC3). There's a fix for at91 somewhere in the git history after
I broke it. I started trying to untangle things with at91, but never
finished that.

Rob