Re: [PATCH] mm: hwpoison: deal with page cache THP

From: HORIGUCHI NAOYA(堀口 直也)
Date: Fri Sep 03 2021 - 07:53:21 EST


On Thu, Sep 02, 2021 at 11:32:49AM -0700, Yang Shi wrote:
> On Wed, Sep 1, 2021 at 8:07 PM HORIGUCHI NAOYA(堀口 直也)
> <naoya.horiguchi@xxxxxxx> wrote:
> >
> > On Mon, Aug 30, 2021 at 04:44:06PM -0700, Yang Shi wrote:
> > > On Thu, Aug 26, 2021 at 10:02 PM Yang Shi <shy828301@xxxxxxxxx> wrote:
> > > >
> > > > On Thu, Aug 26, 2021 at 8:57 PM HORIGUCHI NAOYA(堀口 直也)
> > > > <naoya.horiguchi@xxxxxxx> wrote:
> > > > >
> > > > > On Thu, Aug 26, 2021 at 03:03:57PM -0700, Yang Shi wrote:
> > > > > > On Thu, Aug 26, 2021 at 1:03 PM Yang Shi <shy828301@xxxxxxxxx> wrote:
> > > > > > >
> > > > > > > On Wed, Aug 25, 2021 at 11:17 PM HORIGUCHI NAOYA(堀口 直也)
> > > > > > > <naoya.horiguchi@xxxxxxx> wrote:
> > > > > > > >
> > > > > > > > On Tue, Aug 24, 2021 at 03:13:22PM -0700, Yang Shi wrote:
> > > > > ...
> > > > > > > >
> > > > > > > > There was a discussion about another approach of keeping error pages in page
> > > > > > > > cache for filesystem without backend storage.
> > > > > > > > https://lore.kernel.org/lkml/alpine.LSU.2.11.2103111312310.7859@eggly.anvils/
> > > > > > > > This approach seems to me less complicated, but one concern is that this
> > > > > > > > change affects user-visible behavior of memory errors. Keeping error pages
> > > > > > > > in page cache means that the errors are persistent until next system reboot,
> > > > > > > > so we might need to define the way to clear the errors to continue to use
> > > > > > > > the error file. Current implementation is just to send SIGBUS to the
> > > > > > > > mapping processes (at least once), then forget about the error, so there is
> > > > > > > > no such issue.
> > > > > > > >
> > > > > > > > Another thought of possible solution might be to send SIGBUS immediately when
> > > > > > > > a memory error happens on a shmem thp. We can find all the mapping processes
> > > > > > > > before splitting shmem thp, so send SIGBUS first, then split it and contain
> > > > > > > > the error page. This is not elegant (giving up any optional actions) but
> > > > > > > > anyway we can avoid the silent data lost.
> > > > > > >
> > > > > > > Thanks a lot. I apologize I didn't notice you already posted a similar
> > > > > > > patch before.
> > > > > > >
> > > > > > > Yes, I think I focused on the soft offline part too much and missed
> > > > > > > the uncorrected error part and I admit I did underestimate the
> > > > > > > problem.
> > > > > > >
> > > > > > > I think Hugh's suggestion makes sense if we treat tmpfs as a regular
> > > > > > > filesystem (just memory backed). AFAIK, some filesystem, e.g. btrfs,
> > > > > > > may do checksum after reading from storage block then return an error
> > > > > > > if checksum is not right since it may indicate hardware failure on
> > > > > > > disk. Then the syscalls or page fault return error or SIGBUS.
> > > > > > >
> > > > > > > So in shmem/tmpfs case, if hwpoisoned page is met, just return error
> > > > > > > (-EIO or whatever) for syscall or SIGBUS for page fault. It does align
> > > > > > > with the behavior of other filesystems. It is definitely applications'
> > > > > > > responsibility to check the return value of read/write syscalls.
> > > > > >
> > > > > > BTW, IIUC the dirty regular page cache (storage backed) would be left
> > > > > > in the page cache too, the clean page cache would be truncated since
> > > > > > they can be just reread from storage, right?
> > > > >
> > > > > A dirty page cache is also removed on error (me_pagecache_dirty() falls
> > > > > through me_pagecache_clean(), then truncate_error_page() is called).
> > > > > The main purpose of this is to separate off the error page from exising
> > > > > data structures to minimize the risk of later accesses (maybe by race or bug).
> > > > > But we can change this behavior for specific file systems by updating
> > > > > error_remove_page() callbacks in address_space_operation.
> > > >
> > > > Yeah, if fs's error_remove_page() is defined. It seems the filesystems
> > > > which have error_remove_page() defined just use generic_remove_page()
> > > > except hugetlbfs. And the generic implementation just clears the dirty
> > > > flag and removes the page from page cache.
> > > >
> > > > If error_remove_page() is not defined, the page would stay in page
> > > > cache since invalidate_inode_page() can't remove dirty page.
> > > >
> > > > >
> > > > > Honestly, it seems to me that how dirty data is lost does not depend on
> > > > > file system, and I'm still not sure that this is really a right approach
> > > > > for the current issue.
> > > >
> > > > IMHO the biggest problem is that applications may see
> > > > obsolete/inconsistent data silently, right? Actually keeping the
> > > > corrupted page in page cache should be able to notify applications
> > > > that they are accessing inconsistent data.
> > >
> > > The removal from page cache behavior may be much worse for shmem/tmpfs
> > > since it actually removes the whole data blocks for the file. The user
> > > will get all zero if the corrupted blocks are read without any
> > > notification.
> > >
> > > The more I stared at the code and had tests done, the more I think we
> > > should keep the corrupted page in page cache and notify the users.
> > >
> > > It seems easier for readonly filesystem. Just remove the page from
> > > page cache since it always could read data from disk. This is also the
> > > current behavior.
> > >
> > > For shmem, the page could be kept in page cache with dirty flag set
> > > since it won't be written back.
> > >
> > > For regular filesystems that could do writeback, things are a little
> > > bit more complicated since we need to prevent from writing back by
> > > clearing dirty flag. Other than writeback we also need to distinguish
> > > cache drop from truncation/hole punch/unlink. We don't want cache drop
> > > (e.g. echo 1 > /proc/sys/vm/drop_caches) drop corrupted page. But
> > > truncate/hole punch/unlink should be fine to remove the page since the
> > > underlying data blocks will be gone too.
> > >
> > > Thanks to the refcount pin done by memory failure, cache drop can't
> > > drop the page since it checks if the refcount is expected or not.
> > > Truncate/hole punch/unlink doesn't check refcount so they could
> > > proceed. But inode evict (slab shrinking path) may call truncate, so
> > > the corrupted page may still be removed from page cache when the
> > > underlying data blocks still exist IIUC. There might be other paths in
> > > filesystems to have page cache truncate but the underlying data blocks
> > > are still present.
> > >
> > > The read/write syscalls also need check hwpoisoned flag. I'm not sure
> > > if I miss other syscalls or not.
> >
> > Thanks for analyzing, I think that filesystems supporting writeback might
> > call filemap_write_and_wait() when evicting inode, which can notify error
> > by AS_EIO flag in struct address_space. But it does nothing for no-writeback
> > filesystems like shmem. So we need better error report for them.
>
> AFAIK the address_space error just works for fsync. Anyway I could be wrong.
>
> I think clearing the dirty flag might be the easiest way? It seems
> unnecessary to notify the users when writing back since the most write
> back happens asynchronously. They should be notified when the page is
> accessed, e.g. read/write and page fault.
>
> I did some further investigation and got a clearer picture for
> writeback filesystem:
> 1. The page should be not written back: clearing dirty flag could
> prevent from writeback
> 2. The page should be not dropped (it shows as a clean page): the
> refcount pin from hwpoison could prevent from invalidating (called by
> cache drop, inode cache shrinking, etc), but it doesn't avoid
> invalidation in DIO path (easy to deal with)
> 3. The page should be able to get truncated/hole punched/unlinked: it
> works as it is
> 4. Notify users when the page is accessed, e.g. read/write, page fault
> and other paths: this is hard
>
> The hardest part is #4. Since there are too many paths in filesystems
> that do *NOT* check if page is poisoned or not, e.g. read/write,
> compression (btrfs, f2fs), etc. A couple of ways to handle it off the
> top of my head:
> 1. Check hwpoison flag for every path, the most straightforward way,
> but a lot work
> 2. Return NULL for poisoned page from page cache lookup, the most
> callsites check if NULL is returned, this should have least work I
> think. But the error handling in filesystems just return -ENOMEM, the
> error code will incur confusion to the users obviously.
> 3. To improve #2, we could return error pointer, e.g. ERR_PTR(-EIO),
> but this will involve significant amount of code change as well since
> all the paths need check if the pointer is ERR or not.

I think the approach #3 sounds good for now, it seems to me that these
statements are about general ways to handle error pages on all page cache
users, so then the amount of code changes is a big problem, but when
focusing on shmem/tmpfs, could the amount of changes be more handlable, or
still large?

> 4. #3 may break truncate, so maybe need convert hwpoison page to
> exceptional entry? I'm not sure if I'm over-engineered or not.

I think of taking refcount of inode associated with error pages to prevent
the truncation via inode eviction, which might be worth considering.

We somehow need keep error information on memory, which should be kept from
being removed, maybe except system reboot and explicit removal operation
from the file's user. So it might be helpful if we can deal with
inode_evict from slab shrinking and from explicit calls from users.

> 5. We also could define a new FGP flag to return poisoned page, NULL
> or error pointer. This also should need significant code change since
> a lt callsites need to be contemplated.

Could you explain a little more about which callers should use the flag?

>
> Most filesystems use generic page fault handler (filemap_fault), just
> very few have their own implementation, e.g. ceph, DAX, etc.
>
> I don't know which way we should go, should need more advice.

I think that DAX doesn't use page cache, so I think that it anyway needs
special handling as a separate issue.

Thanks,
Naoya Horiguchi

>
> >
> > >
> > > I'm not a filesystem expert so I'm not sure if I'm missing something
> > > else or not. But I'm supposed the most should be covered.
> > >
> > > I'd like to start with shmem/tmpfs since it is relatively easier and
> > > this also could unblock shmem THP hwpoison support. Any comment is
> > > welcome.
> >
> > I think that keeping corrupted pages in page cache can be a better solution.
> > So if you plan to write a patchset, I'm glad to review/test it. Starting with
> > shmem/tmpfs sounds nice to me.
>
> Thank you very much. Yes, I'm working on it. And I already had some
> patches work (just check if page is hwpoisoned in every path, #1
> approach listed above). I could clean up the patches and send out to
> gather some feedback.