Re: [PATCH v6 0/1] asus-wmi: Add support for custom fan curves

From: Luke Jones
Date: Mon Aug 30 2021 - 05:09:02 EST




On Mon, Aug 30 2021 at 10:20:57 +1200, Luke Jones <luke@xxxxxxxxxx> wrote:


On Mon, Aug 30 2021 at 08:55:17 +1200, Luke Jones <luke@xxxxxxxxxx> wrote:


On Sun, Aug 29 2021 at 08:18:01 -0700, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
On 8/29/21 3:03 AM, Luke Jones wrote:


On Sun, Aug 29 2021 at 11:57:55 +0200, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
Hi Luke,

On 8/29/21 9:14 AM, Luke D. Jones wrote:
Add support for custom fan curves found on some ASUS ROG laptops.

- V1
+ Initial patch work
- V2
+ Don't fail and remove wmi driver if error from
asus_wmi_evaluate_method_buf() if error is -ENODEV
- V3
+ Store the "default" fan curves
+ Call throttle_thermal_policy_write() if a curve is erased to ensure
that the factory default for a profile is applied again
- V4
+ Do not apply default curves by default. Testers have found that the
default curves don't quite match actual no-curve behaviours
+ Add method to enable/disable curves for each profile
- V5
+ Remove an unrequired function left over from previous iterations
+ Ensure default curves are applied if user writes " " to a curve path
+ Rename "active_fan_curve_profiles" to "enabled_fan_curve_profiles" to
better reflect the behavious of this setting
+ Move throttle_thermal_policy_write_*pu_curves() and rename to
fan_curve_*pu_write()
+ Merge fan_curve_check_valid() and fan_curve_write()
+ Remove some leftover debug statements
- V6
+ Refactor data structs to store array or u8 instead of strings.
This affects the entire patch except the enabled_fan_curves block
+ Use sysfs_match_string in enabled_fan_curve block
+ Add some extra comments to describe things
+ Allow some variation in how fan curve input can be formatted
+ Use SENSOR_DEVICE_ATTR_2_RW() to reduce the amount of lines per
fan+profile combo drastically

Thank you for your continued work on this. I read in the discussin of v5
that you discussed using the standard auto_point#_pwm, auto_point#_temp
pairs. I see here that you have decided to not go that route, may I ask
why ?

Sure, primary reason is because the RPM for the fans is in percentage so it didn't really make sense to me to use that format.

Also if the max for that is 255 then I'd need to introduce scaling to make match what the ACPI method expects (max 100). But yeah, auto_point#_pwm changes the meaning.


Bad argument. That is true for other controllers as well. You could
just scale it up and down as needed.

The whole point of an ABI is that it is standardized.
If others would [be permitted to] follow your line of argument,
we would not have a useful ABI because "my chip provides/needs
data in some other format".

Guenter

Understood. But lets see if I understand fully:

The key part is "pwmX_auto_pointN_temp and pwmX_auto_pointN_pwm", with X being a profile, and N the point in the curve graph. If I use this format I have:

- 3 profiles
- each profile has two fans
- each fan has 8 points on it
- each point has 2 integers

so that makes for a total of 96 individual sysfs paths. Is that really okay? And where would the new paths god?
- Under /sys/devices/platform/asus-nb-wmi/ still, or
- /sys/devices/platform/asus-nb-wmi/hwmon/ ?

I'm currently using SENSOR_DEVICE_ATTR_2_RW with index = profile, nr = fan. If there weren't profiles involved then I could see it being easily achieved with that.. Maybe I could use the index(profile) with a mask to get the fan number.

I've done all the groundwork for it at least, so it can certainly be done. My only worry is that because of the sheer number of sysfs paths being added (96) it could become unwieldy to use.

Could I use the existing method + the above?

I've had a bit of a think after morning coffee and I think there is another way to do this:

- CPU Fan = pwm1_auto_pointN_pwm + pwm1_auto_pointN_temp
- GPU Fan = pwm2_auto_pointN_pwm + pwm2_auto_pointN_temp
for example. So we're not breaking the meaning of anything or making things obtuse and complex.

Ending up with:
/* CPU */
// (name, function, fan, point)
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_temp, fan_curve, 1, 0);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_temp, fan_curve, 1, 1);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_temp, fan_curve, 1, 2);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_temp, fan_curve, 1, 3);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_temp, fan_curve, 1, 4);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_temp, fan_curve, 1, 5);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_temp, fan_curve, 1, 6);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_temp, fan_curve, 1, 7);

static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_pwm, fan_curve, 1, 0);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_pwm, fan_curve, 1, 1);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_pwm, fan_curve, 1, 2);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_pwm, fan_curve, 1, 3);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_pwm, fan_curve, 1, 4);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_pwm, fan_curve, 1, 5);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_pwm, fan_curve, 1, 6);
static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_pwm, fan_curve, 1, 7);
/* and the same for GPU fan */

But because we still have 3 profiles to consider, I would propose that the settings be show/store dependant on the profile that the machine is in, e.g, internally show/store to correct profile via checking current profile number active.

I do need some suggestions on what I see as an issue though:
(1)
Given that it now becomes difficult to write all the settings at once, at what point should I attempt to write the "block" to the device? Write out for every change?
(2)
Also given the above, how do I reasonably check the user isn't trying to create an invalid graph? E.g, lower fan speeds for higher temperature? Check that a point isn't higher/lower than neighbouring points and expect users to write the points in reverse?

I could maybe also have pwm1_enable and pwm2_enable. Perhaps set this to false if a change is made, then only write out the full block if it is then set to enabled. Further to this, if the user changes profiles and the curves have been previously set and enabled, then that curve is written out per usual.

Looking forward to some guidance on this. I'll try making a start on what I've proposed above for now.


Many thanks,
Luke.



I have completed the above now. So I'll now complete testing and then submit v7. What a journey, learning a lot.

Cheers!