[PATCH v10 09/12] Input: wacom_i2c - Use macros for the bit masks

[Alistair Francis]

To make the code easier to read use macros for the bit masks.

Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx>
---
 drivers/input/touchscreen/wacom_i2c.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
index 13341e76368b..f78a43212901 100644
--- a/drivers/input/touchscreen/wacom_i2c.c
+++ b/drivers/input/touchscreen/wacom_i2c.c
@@ -18,6 +18,14 @@
 #include <linux/of.h>
 #include <asm/unaligned.h>
 
+// Bitmasks (for data[3])
+#define WACOM_TIP_SWITCH_bm         (1 << 0)
+#define WACOM_BARREL_SWITCH_bm      (1 << 1)
+#define WACOM_ERASER_bm             (1 << 2)
+#define WACOM_INVERT_bm             (1 << 3)
+#define WACOM_BARREL_SWITCH_2_bm    (1 << 4)
+#define WACOM_IN_RANGE_bm           (1 << 5)
+
 // Registers
 #define WACOM_DESC_REG	0x01
 #define WACOM_COMMAND_LSB   0x04
@@ -206,10 +214,10 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
 	if (error < 0)
 		goto out;
 
-	tsw = data[3] & 0x01;
-	ers = data[3] & 0x04;
-	f1 = data[3] & 0x02;
-	f2 = data[3] & 0x10;
+	tsw = data[3] & WACOM_TIP_SWITCH_bm;
+	ers = data[3] & WACOM_ERASER_bm;
+	f1 = data[3] & WACOM_BARREL_SWITCH_bm;
+	f2 = data[3] & WACOM_BARREL_SWITCH_2_bm;
 	x = le16_to_cpup((__le16 *)&data[4]);
 	y = le16_to_cpup((__le16 *)&data[6]);
 	pressure = le16_to_cpup((__le16 *)&data[8]);
-- 
2.31.1