Re: [PATCH] usb: gadget: f_uac2: fixup feedback endpoint stop

[Thinh Nguyen]

Ferry Toth wrote:
> Hi,
> 
> Op 25-08-2021 om 11:21 schreef Jerome Brunet:
>> When the uac2 function is stopped, there seems to be an issue with some
>> platforms (Intel Merrifield at least)
>>

The issue isn't hardware specific.

>> BUG: kernel NULL pointer dereference, address: 0000000000000008
>> ...
>> RIP: 0010:dwc3_gadget_del_and_unmap_request+0x19/0xe0
>> ...
>> Call Trace:
>>   dwc3_remove_requests.constprop.0+0x12f/0x170
>>   __dwc3_gadget_ep_disable+0x7a/0x160
>>   dwc3_gadget_ep_disable+0x3d/0xd0
>>   usb_ep_disable+0x1c/0x70
>>   u_audio_stop_capture+0x79/0x120 [u_audio]
>>   afunc_set_alt+0x73/0x80 [usb_f_uac2]
>>   composite_setup+0x224/0x1b90 [libcomposite]
>>
>> The issue happens only when the gadget is using the sync type "async",
>> not
>> "adaptive". This indicates that problem is likely coming from the
>> feedback
>> endpoint, which is only used with async synchronization mode.

This does not describe the actual problem. The problem is that the
usb_ep_dequeue() can be an asynchronous call, and we can't free the
request until its completion (from cancellation).

>>
>> Update the feedback endpoint free function to release the endpoint the
>> same
>> way it is done for the data endpoint.
>>
>> Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
>> ---
>>
>>   Hi Ferry,
>>
>>   Would you mind trying this before reverting the whole thing ?
>>   The HW I have did not show the issue so far so I can't really check
>>   if it helps. Hopefully, it does ...
> 
> Tested this evening and confirming that this resolves my issue. I can't
> say much about the code itself, maybe Thinh?

Sure. I can take a look.

> 
> Would be great if we could get this in instead of reverting the series.
> 
> Tested-by:  Ferry Toth <ftoth@xxxxxxxxxxxxxx> (dwc3 / Intel Merrifield)
> 
>>   drivers/usb/gadget/function/u_audio.c | 15 +++++++++++----
>>   1 file changed, 11 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/usb/gadget/function/u_audio.c
>> b/drivers/usb/gadget/function/u_audio.c
>> index 018dd0978995..63d9340f008e 100644
>> --- a/drivers/usb/gadget/function/u_audio.c
>> +++ b/drivers/usb/gadget/function/u_audio.c
>> @@ -230,7 +230,13 @@ static void u_audio_iso_fback_complete(struct
>> usb_ep *ep,
>>       int status = req->status;
>>         /* i/f shutting down */
>> -    if (!prm->fb_ep_enabled || req->status == -ESHUTDOWN)
>> +    if (!prm->fb_ep_enabled) {

prm->fb_ep_enabled is not protected. Potential race problem here?

>> +        kfree(req->buf);
>> +        usb_ep_free_request(ep, req);
>> +        return;
>> +    }
>> +
>> +    if (req->status == -ESHUTDOWN)
>>           return;
>>         /*
>> @@ -421,9 +427,10 @@ static inline void free_ep_fback(struct
>> uac_rtd_params *prm, struct usb_ep *ep)
>>       prm->fb_ep_enabled = false;
>>         if (prm->req_fback) {
>> -        usb_ep_dequeue(ep, prm->req_fback);
>> -        kfree(prm->req_fback->buf);
>> -        usb_ep_free_request(ep, prm->req_fback);
>> +        if (usb_ep_dequeue(ep, prm->req_fback)) {
>> +            kfree(prm->req_fback->buf);
>> +            usb_ep_free_request(ep, prm->req_fback);
>> +        }
>>           prm->req_fback = NULL;
>>       }
>>   

On a separate note, I notice that f_uac2 only queues a single feedback
request at a time for isoc endpoint? Even though the interval is 1ms,
this will easily cause data drop.

Also, you're ignoring other request error status and still processing
bogus data on request completion? That doesn't seem right.

BR,
Thinh