Re: [PATCH 13/14] docs: hwmon: Document PECI drivers
From: Guenter Roeck
Date: Wed Aug 04 2021 - 14:05:57 EST
On 8/4/21 10:52 AM, Zev Weiss wrote:
On Mon, Aug 02, 2021 at 06:37:30AM CDT, Winiarska, Iwona wrote:
On Tue, 2021-07-27 at 22:58 +0000, Zev Weiss wrote:
On Mon, Jul 12, 2021 at 05:04:46PM CDT, Iwona Winiarska wrote:
From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
Add documentation for peci-cputemp driver that provides DTS thermal
readings for CPU packages and CPU cores and peci-dimmtemp driver that
provides DTS thermal readings for DIMMs.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
Co-developed-by: Iwona Winiarska <iwona.winiarska@xxxxxxxxx>
Signed-off-by: Iwona Winiarska <iwona.winiarska@xxxxxxxxx>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
---
Documentation/hwmon/index.rst | 2 +
Documentation/hwmon/peci-cputemp.rst | 93 +++++++++++++++++++++++++++
Documentation/hwmon/peci-dimmtemp.rst | 58 +++++++++++++++++
MAINTAINERS | 2 +
4 files changed, 155 insertions(+)
create mode 100644 Documentation/hwmon/peci-cputemp.rst
create mode 100644 Documentation/hwmon/peci-dimmtemp.rst
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index bc01601ea81a..cc76b5b3f791 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -154,6 +154,8 @@ Hardware Monitoring Kernel Drivers
pcf8591
pim4328
pm6764tr
+ peci-cputemp
+ peci-dimmtemp
pmbus
powr1220
pxe1610
diff --git a/Documentation/hwmon/peci-cputemp.rst
b/Documentation/hwmon/peci-cputemp.rst
new file mode 100644
index 000000000000..d3a218ba810a
--- /dev/null
+++ b/Documentation/hwmon/peci-cputemp.rst
@@ -0,0 +1,93 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver peci-cputemp
+==========================
+
+Supported chips:
+ One of Intel server CPUs listed below which is connected to a PECI
bus.
+ * Intel Xeon E5/E7 v3 server processors
+ Intel Xeon E5-14xx v3 family
+ Intel Xeon E5-24xx v3 family
+ Intel Xeon E5-16xx v3 family
+ Intel Xeon E5-26xx v3 family
+ Intel Xeon E5-46xx v3 family
+ Intel Xeon E7-48xx v3 family
+ Intel Xeon E7-88xx v3 family
+ * Intel Xeon E5/E7 v4 server processors
+ Intel Xeon E5-16xx v4 family
+ Intel Xeon E5-26xx v4 family
+ Intel Xeon E5-46xx v4 family
+ Intel Xeon E7-48xx v4 family
+ Intel Xeon E7-88xx v4 family
+ * Intel Xeon Scalable server processors
+ Intel Xeon D family
+ Intel Xeon Bronze family
+ Intel Xeon Silver family
+ Intel Xeon Gold family
+ Intel Xeon Platinum family
+
+ Datasheet: Available from http://www.intel.com/design/literature.htm
+
+Author: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
+
+Description
+-----------
+
+This driver implements a generic PECI hwmon feature which provides Digital
+Thermal Sensor (DTS) thermal readings of the CPU package and CPU cores that
are
+accessible via the processor PECI interface.
+
+All temperature values are given in millidegree Celsius and will be
measurable
+only when the target CPU is powered on.
+
+Sysfs interface
+-------------------
+
+=======================
=======================================================
+temp1_label "Die"
+temp1_input Provides current die temperature of the CPU package.
+temp1_max Provides thermal control temperature of the CPU
package
+ which is also known as Tcontrol.
+temp1_crit Provides shutdown temperature of the CPU package
which
+ is also known as the maximum processor junction
+ temperature, Tjmax or Tprochot.
+temp1_crit_hyst Provides the hysteresis value from Tcontrol
to Tjmax of
+ the CPU package.
+
+temp2_label "DTS"
+temp2_input Provides current DTS temperature of the CPU package.
Would this be a good place to note the slightly counter-intuitive nature
of DTS readings? i.e. add something along the lines of "The DTS sensor
produces a delta relative to Tjmax, so negative values are normal and
values approaching zero are hot." (In my experience people who aren't
already familiar with it tend to think something's wrong when a CPU
temperature reading shows -50C.)
I believe that what you're referring to is a result of "GetTemp", and we're
using it to calculate "Die" sensor values (temp1).
The sensor value is absolute - we don't expose "raw" thermal sensor value
(delta) anywhere.
DTS sensor is exposing temperature value scaled to fit DTS 2.0 thermal profile:
https://www.intel.com/content/www/us/en/processors/xeon/scalable/xeon-scalable-thermal-guide.html
(section 5.2.3.2)
Similar to "Die" sensor - it's also exposed in absolute form.
I'll try to change description to avoid confusion.
When I tested the patch series by applying it to my OpenBMC kernel, the
temp2_input sysfs file produced negative numbers (as has been the case
with previous iterations of the PECI patchset). Is that expected? From
what Guenter has said it sounds like that's going to need to change so
that the temperature readings are all in "normal" millidegrees C
(that is, relative to the freezing point of water).
Correct, the temperature is expected to be reported in millidegrees C
per hwmon ABI. Everything else is unacceptable. That makes me wonder what
"raw" and "absolute" means. Negative numbers suggest that, whatever is
reported today, it is not millidegrees C.
Guenter