[PATCH v2 07/15] ARM: tegra: apalis: Correct interrupt trigger type of temperature sensor

From: Dmitry Osipenko
Date: Mon Aug 02 2021 - 17:21:07 EST


The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.

Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 2 +-
arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 1e30fa405fa0..cde9ae8fa04b 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -1751,7 +1751,7 @@ temp-sensor@4c {
compatible = "ti,tmp451";
reg = <0x4c>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
#thermal-sensor-cells = <1>;
vcc-supply = <&reg_module_3v3>;
};
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 608896f8dd52..a46d9ba9bb7a 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -1744,7 +1744,7 @@ temp-sensor@4c {
compatible = "ti,tmp451";
reg = <0x4c>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
#thermal-sensor-cells = <1>;
vcc-supply = <&reg_module_3v3>;
};
--
2.32.0