Re: [PATCH v3 2/7] regulator: qca6390: add support for QCA639x powerup sequence

From: Rob Herring
Date: Wed Jul 14 2021 - 12:47:18 EST


On Thu, Jul 08, 2021 at 02:37:44PM +0300, Dmitry Baryshkov wrote:
> Hi,
>
> On Thu, 8 Jul 2021 at 13:10, Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
> >
> > - Peter (the email was bouncing)
>
> + Peter's kernel.org address
>
> >
> > On Tue, 6 Jul 2021 at 13:55, Mark Brown <broonie@xxxxxxxxxx> wrote:
> > >
> > > On Tue, Jul 06, 2021 at 09:54:03AM +0200, Ulf Hansson wrote:
> > > > On Tue, 22 Jun 2021 at 00:32, Dmitry Baryshkov
> > >
> > > > > Qualcomm QCA6390/1 is a family of WiFi + Bluetooth SoCs, with BT part
> > > > > being controlled through the UART and WiFi being present on PCIe
> > > > > bus. Both blocks share common power sources. Add device driver handling
> > > > > power sequencing of QCA6390/1.
> > >
> > > > Power sequencing of discoverable buses have been discussed several
> > > > times before at LKML. The last attempt [1] I am aware of, was in 2017
> > > > from Peter Chen. I don't think there is a common solution, yet.
> > >
> > > This feels a bit different to the power sequencing problem - it's not
> > > exposing the individual inputs to the device but rather is a block that
> > > manages everything but needs a bit of a kick to get things going (I'd
> > > guess that with ACPI it'd be triggered via AML). It's in the same space
> > > but it's not quite the same issue I think, something that can handle
> > > control of the individual resources might still struggle with this.
> >
> > Well, to me it looks very similar to those resouses we could manage
> > with the mmc pwrseq, for SDIO. It's also typically the same kind of
> > combo-chips that moved from supporting SDIO to PCIe, for improved
> > performance I guess. More importantly, the same constraint to
> > pre-power on the device is needed to allow it to be discovered/probed.
>
> In our case we'd definitely use pwrseq for PCIe bus and we can also
> benefit from using pwrseq for serdev and for platform busses also (for
> the same story of WiFi+BT chips).
>
> I can take a look at rewriting pwrseq code to also handle the PCIe
> bus. Rewriting it to be a generic lib seems like an easy task,
> plugging it into PCIe code would be more fun.
>
> Platform and serdev... Definitely even more fun.

I don't want to see pwrseq (the binding) expanded to other buses. If
that was the answer, we wouldn't be having this discussion. It was a
mistake for MMC IMO.

If pwrseq works as a kernel library/api, then I have no issue with that.

>
> > Therefore, I think it would be worth having a common solution for
> > this, rather than a solution per subsystem or even worse, per device.

Power sequencing requirements are inheritently per device unless we're
talking about standard connectors.

This is a solved problem on MDIO. It's quite simple. If there's a DT
node for a device you haven't discovered, then probe it anyways.

Rob