Re: [PATCH v3 5/5] staging: vchiq: Combine vchiq platform code into single file

From: Ojaswin Mujoo
Date: Sun Jul 11 2021 - 07:28:34 EST


On Sun, Jul 11, 2021 at 12:49:35PM +0200, Stefan Wahren wrote:
> Am 04.07.21 um 17:59 schrieb Ojaswin Mujoo:
> > Combine the vchiq platform initialization code into a single file by
> > merging vchiq_2835_arm.c into vchiq_arm.c
> >
> > Signed-off-by: Ojaswin Mujoo <ojaswin98@xxxxxxxxx>
> > ---
> > drivers/staging/vc04_services/Makefile | 1 -
> > .../interface/vchiq_arm/vchiq_2835_arm.c | 564 ------------------
> > .../interface/vchiq_arm/vchiq_arm.c | 549 +++++++++++++++++
> > 3 files changed, 549 insertions(+), 565 deletions(-)
> > delete mode 100644 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
> >
> > diff --git a/drivers/staging/vc04_services/Makefile b/drivers/staging/vc04_services/Makefile
> > index 0a04338fc962..1fd191e2e2a5 100644
> > --- a/drivers/staging/vc04_services/Makefile
> > +++ b/drivers/staging/vc04_services/Makefile
> > @@ -4,7 +4,6 @@ obj-$(CONFIG_BCM2835_VCHIQ) += vchiq.o
> > vchiq-objs := \
> > interface/vchiq_arm/vchiq_core.o \
> > interface/vchiq_arm/vchiq_arm.o \
> > - interface/vchiq_arm/vchiq_2835_arm.o \
> > interface/vchiq_arm/vchiq_debugfs.o \
> > interface/vchiq_arm/vchiq_connected.o \
> >
> ...
> > diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> > index 0f2de571eba7..9057d01ffd48 100644
> > --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> > +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> > @@ -25,15 +25,32 @@
> > #include <linux/rcupdate.h>
> > #include <linux/delay.h>
> > #include <linux/slab.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/uaccess.h>
> > #include <soc/bcm2835/raspberrypi-firmware.h>
> >
> > #include "vchiq_core.h"
> > #include "vchiq_ioctl.h"
> > #include "vchiq_arm.h"
> > #include "vchiq_debugfs.h"
> > +#include "vchiq_connected.h"
> > +#include "vchiq_pagelist.h"
> >
> > #define DEVICE_NAME "vchiq"
> >
> > +#define TOTAL_SLOTS (VCHIQ_SLOT_ZERO_SLOTS + 2 * 32)
> > +
> > +#define MAX_FRAGMENTS (VCHIQ_NUM_CURRENT_BULKS * 2)
> > +
> > +#define VCHIQ_PLATFORM_FRAGMENTS_OFFSET_IDX 0
> > +#define VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX 1
> > +
> > +#define BELL0 0x00
> > +#define BELL2 0x08
> > +
> > +#define ARM_DS_ACTIVE BIT(2)
> > +
> > /* Override the default prefix, which would be vchiq_arm (from the filename) */
> > #undef MODULE_PARAM_PREFIX
> > #define MODULE_PARAM_PREFIX DEVICE_NAME "."
> > @@ -59,10 +76,542 @@ static struct vchiq_drvdata bcm2836_drvdata = {
> > .cache_line_size = 64,
> > };
> >
> > +struct vchiq_2835_state {
> > + int inited;
> > + struct vchiq_arm_state arm_state;
> > +};
> > +
> > +struct vchiq_pagelist_info {
> > + struct pagelist *pagelist;
> > + size_t pagelist_buffer_size;
> > + dma_addr_t dma_addr;
> > + enum dma_data_direction dma_dir;
> > + unsigned int num_pages;
> > + unsigned int pages_need_release;
> > + struct page **pages;
> > + struct scatterlist *scatterlist;
> > + unsigned int scatterlist_mapped;
> > +};
> > +
> > +static void __iomem *g_regs;
> > +/* This value is the size of the L2 cache lines as understood by the
> > + * VPU firmware, which determines the required alignment of the
> > + * offsets/sizes in pagelists.
> > + *
> > + * Modern VPU firmware looks for a DT "cache-line-size" property in
> > + * the VCHIQ node and will overwrite it with the actual L2 cache size,
> > + * which the kernel must then respect. That property was rejected
> > + * upstream, so we have to use the VPU firmware's compatibility value
> > + * of 32.
> > + */
> > +static unsigned int g_cache_line_size = 32;
> > +static unsigned int g_fragments_size;
> > +static char *g_fragments_base;
> > +static char *g_free_fragments;
> > +static struct semaphore g_free_fragments_sema;
> > +static struct device *g_dev;
> > +
> > +static DEFINE_SEMAPHORE(g_free_fragments_mutex);
> > +
> > +static irqreturn_t
> > +vchiq_doorbell_irq(int irq, void *dev_id);
> > +
> > +static struct vchiq_pagelist_info *
> > +create_pagelist(char *buf, char __user *ubuf, size_t count, unsigned short type);
> > +
> > +static void
> > +free_pagelist(struct vchiq_pagelist_info *pagelistinfo,
> > + int actual);
>
> please no forward declarations of these 3 functions. Put them into the
> right order instead ...
>
> Since this patch is independent from the other ones from the series,
> maybe Greg can merg the rest of the series.
>
>
>

Hello Stefan,

Thanks for the review. As for the forward declerations, sure I can fix
these 3 functions and send an independent patch for this.

Regards,
Ojaswin