Re: [PATCH net-next v2 4/8] net: usb: asix: ax88772: add phylib support

From: Heiner Kallweit
Date: Fri Jun 18 2021 - 07:04:21 EST

Next message: 刘海龙(DuckBuBee): "回复: [PATCH] staging: android: ashmem: add size field in procfs fdinfo"
Previous message: gumingtao: "[PATCH] slab: Use %s instead of function name"
In reply to: Oleksij Rempel: "Re: [PATCH net-next v2 4/8] net: usb: asix: ax88772: add phylib support"
Next in thread: Marek Szyprowski: "Re: [PATCH net-next v2 4/8] net: usb: asix: ax88772: add phylib support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 18.06.2021 12:13, Oleksij Rempel wrote:
> Hi Marek,
>
> thank you for your feedback.
>
> On Fri, Jun 18, 2021 at 10:39:12AM +0200, Marek Szyprowski wrote:
>> Hi Oleksij,
>>
>> On 07.06.2021 10:27, Oleksij Rempel wrote:
>>> To be able to use ax88772 with external PHYs and use advantage of
>>> existing PHY drivers, we need to port at least ax88772 part of asix
>>> driver to the phylib framework.
>>>
>>> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
>>
>> I found one more issue with this patch. On one of my test boards
>> (Samsung Exynos5250 SoC based Arndale) system fails to establish network
>> connection just after starting the kernel when the driver is build-in.
>>
If you build in the MAC driver, do you also build in the PHY driver?
If the PHY driver is still a module this could explain why genphy
driver is used.
And your dmesg filtering suppresses the phy_attached_info() output
that would tell us the truth.

>> --->8---
>> # dmesg | grep asix
>> [    2.761928] usbcore: registered new interface driver asix
>> [    5.003110] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized):
>> invalid hw address, using random
>> [    6.065400] asix 1-3.2.4:1.0 eth0: register 'asix' at
>> usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 7a:9b:9a:f2:94:8e
>> [   14.043868] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow
>> control off
>> # ping -c2 host
>> PING host (192.168.100.1) 56(84) bytes of data.
>> From 192.168.100.20 icmp_seq=1 Destination Host Unreachable
>> From 192.168.100.20 icmp_seq=2 Destination Host Unreachable
>>
>> --- host ping statistics ---
>> 2 packets transmitted, 0 received, +2 errors, 100% packet loss, time 59ms
>> --->8---
>
> Hm... it looks like different chip variant. My is registered as
> "ASIX AX88772B USB", yours is "ASIX AX88772 USB 2.0" - "B" is the
> difference. Can you please tell me more about this adapter and if possible open
> tell the real part name.
>
> I can imagine that this adapter may using generic PHY driver.
> Can you please confirm it by dmesg | grep PHY?
> In my case i'll get:
> Asix Electronics AX88772C usb-001:003:10: attached PHY driver (mii_bus:phy_addr=usb-001:003:10, irq=POLL)
>
> If you have a different PHY, can you please send me the PHY id:
> cat /sys/bus/mdio_bus/devices/usb-001\:003\:10/phy_id
>
> Your usb path will probably be different.
>
>> Calling ifup eth0 && ifdown eth0 fixes the network status:
>>
>> --->8---
>> # ifdown eth0 && ifup eth0
>> [   60.474929] asix 1-3.2.4:1.0 eth0: Link is Down
>> [   60.623516] asix 1-3.2.4:1.0 eth0: Link is Down
>> [   62.774304] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> [   62.786354] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow
>> control off
>> # ping -c2 host
>> PING host (192.168.100.1) 56(84) bytes of data.
>> 64 bytes from host (192.168.100.1): icmp_seq=1 ttl=64 time=1.25 ms
>> 64 bytes from host (192.168.100.1): icmp_seq=2 ttl=64 time=0.853 ms
>>
>> --- host ping statistics ---
>> 2 packets transmitted, 2 received, 0% packet loss, time 3ms
>> rtt min/avg/max/mdev = 0.853/1.053/1.254/0.203 ms
>> --->8---
>>
>> When driver is loaded as a module (and without any other modules, so
>> this is not a dependency issue), the connection is established properly
>> just after the boot:
>>
>> --->8---
>> # dmesg | grep asix
>> [   13.633284] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized):
>> invalid hw address, using random
>> [   15.390350] asix 1-3.2.4:1.0 eth0: register 'asix' at
>> usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 3a:51:11:08:aa:ea
>> [   15.414052] usbcore: registered new interface driver asix
>> [   15.832564] asix 1-3.2.4:1.0 eth0: Link is Down
>> [   18.053747] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow
>> control off
>> # ping -c2 host
>> PING host (192.168.100.1) 56(84) bytes of data.
>> 64 bytes from host (192.168.100.1): icmp_seq=1 ttl=64 time=0.545 ms
>> 64 bytes from host (192.168.100.1): icmp_seq=2 ttl=64 time=0.742 ms
>>
>> --- host ping statistics ---
>> 2 packets transmitted, 2 received, 0% packet loss, time 3ms
>> rtt min/avg/max/mdev = 0.545/0.643/0.742/0.101 ms
>>
>> --->8---
>>
>> Let me know if I can make any other tests that would help fixing this issue.
>>
>>> ---
>>> drivers/net/usb/asix.h | 9 +++
>>> drivers/net/usb/asix_common.c | 37 ++++++++++
>>> drivers/net/usb/asix_devices.c | 120 +++++++++++++++++++++------------
>>> drivers/net/usb/ax88172a.c | 14 ----
>>> 4 files changed, 122 insertions(+), 58 deletions(-)
>>>
>>> diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
>>> index edb94efd265e..2122d302e643 100644
>>> --- a/drivers/net/usb/asix.h
>>> +++ b/drivers/net/usb/asix.h
>>> @@ -25,6 +25,7 @@
>>> #include <linux/usb/usbnet.h>
>>> #include <linux/slab.h>
>>> #include <linux/if_vlan.h>
>>> +#include <linux/phy.h>
>>>
>>> #define DRIVER_VERSION "22-Dec-2011"
>>> #define DRIVER_NAME "asix"
>>> @@ -178,6 +179,10 @@ struct asix_common_private {
>>> u16 presvd_phy_advertise;
>>> u16 presvd_phy_bmcr;
>>> struct asix_rx_fixup_info rx_fixup_info;
>>> + struct mii_bus *mdio;
>>> + struct phy_device *phydev;
>>> + u16 phy_addr;
>>> + char phy_name[20];
>>> };
>>>
>>> extern const struct driver_info ax88172a_info;
>>> @@ -214,6 +219,7 @@ int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm);
>>>
>>> u16 asix_read_medium_status(struct usbnet *dev, int in_pm);
>>> int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm);
>>> +void asix_adjust_link(struct net_device *netdev);
>>>
>>> int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm);
>>>
>>> @@ -222,6 +228,9 @@ void asix_set_multicast(struct net_device *net);
>>> int asix_mdio_read(struct net_device *netdev, int phy_id, int loc);
>>> void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val);
>>>
>>> +int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum);
>>> +int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, u16 val);
>>> +
>>> int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc);
>>> void asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc,
>>> int val);
>>> diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
>>> index e1109f1a8dd5..085bc8281082 100644
>>> --- a/drivers/net/usb/asix_common.c
>>> +++ b/drivers/net/usb/asix_common.c
>>> @@ -384,6 +384,27 @@ int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm)
>>> return ret;
>>> }
>>>
>>> +/* set MAC link settings according to information from phylib */
>>> +void asix_adjust_link(struct net_device *netdev)
>>> +{
>>> + struct phy_device *phydev = netdev->phydev;
>>> + struct usbnet *dev = netdev_priv(netdev);
>>> + u16 mode = 0;
>>> +
>>> + if (phydev->link) {
>>> + mode = AX88772_MEDIUM_DEFAULT;
>>> +
>>> + if (phydev->duplex == DUPLEX_HALF)
>>> + mode &= ~AX_MEDIUM_FD;
>>> +
>>> + if (phydev->speed != SPEED_100)
>>> + mode &= ~AX_MEDIUM_PS;
>>> + }
>>> +
>>> + asix_write_medium_mode(dev, mode, 0);
>>> + phy_print_status(phydev);
>>> +}
>>> +
>>> int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
>>> {
>>> int ret;
>>> @@ -506,6 +527,22 @@ void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
>>> mutex_unlock(&dev->phy_mutex);
>>> }
>>>
>>> +/* MDIO read and write wrappers for phylib */
>>> +int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
>>> +{
>>> + struct usbnet *priv = bus->priv;
>>> +
>>> + return asix_mdio_read(priv->net, phy_id, regnum);
>>> +}
>>> +
>>> +int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, u16 val)
>>> +{
>>> + struct usbnet *priv = bus->priv;
>>> +
>>> + asix_mdio_write(priv->net, phy_id, regnum, val);
>>> + return 0;
>>> +}
>>> +
>>> int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
>>> {
>>> struct usbnet *dev = netdev_priv(netdev);
>>> diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
>>> index 00b6ac0570eb..e4cd85e38edd 100644
>>> --- a/drivers/net/usb/asix_devices.c
>>> +++ b/drivers/net/usb/asix_devices.c
>>> @@ -285,7 +285,7 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
>>>
>>> static const struct ethtool_ops ax88772_ethtool_ops = {
>>> .get_drvinfo = asix_get_drvinfo,
>>> - .get_link = asix_get_link,
>>> + .get_link = usbnet_get_link,
>>> .get_msglevel = usbnet_get_msglevel,
>>> .set_msglevel = usbnet_set_msglevel,
>>> .get_wol = asix_get_wol,
>>> @@ -293,37 +293,15 @@ static const struct ethtool_ops ax88772_ethtool_ops = {
>>> .get_eeprom_len = asix_get_eeprom_len,
>>> .get_eeprom = asix_get_eeprom,
>>> .set_eeprom = asix_set_eeprom,
>>> - .nway_reset = usbnet_nway_reset,
>>> - .get_link_ksettings = usbnet_get_link_ksettings_mii,
>>> - .set_link_ksettings = usbnet_set_link_ksettings_mii,
>>> + .nway_reset = phy_ethtool_nway_reset,
>>> + .get_link_ksettings = phy_ethtool_get_link_ksettings,
>>> + .set_link_ksettings = phy_ethtool_set_link_ksettings,
>>> };
>>>
>>> -static int ax88772_link_reset(struct usbnet *dev)
>>> -{
>>> - u16 mode;
>>> - struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
>>> -
>>> - mii_check_media(&dev->mii, 1, 1);
>>> - mii_ethtool_gset(&dev->mii, &ecmd);
>>> - mode = AX88772_MEDIUM_DEFAULT;
>>> -
>>> - if (ethtool_cmd_speed(&ecmd) != SPEED_100)
>>> - mode &= ~AX_MEDIUM_PS;
>>> -
>>> - if (ecmd.duplex != DUPLEX_FULL)
>>> - mode &= ~AX_MEDIUM_FD;
>>> -
>>> - netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
>>> - ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
>>> -
>>> - asix_write_medium_mode(dev, mode, 0);
>>> -
>>> - return 0;
>>> -}
>>> -
>>> static int ax88772_reset(struct usbnet *dev)
>>> {
>>> struct asix_data *data = (struct asix_data *)&dev->data;
>>> + struct asix_common_private *priv = dev->driver_priv;
>>> int ret;
>>>
>>> /* Rewrite MAC address */
>>> @@ -342,6 +320,8 @@ static int ax88772_reset(struct usbnet *dev)
>>> if (ret < 0)
>>> goto out;
>>>
>>> + phy_start(priv->phydev);
>>> +
>>> return 0;
>>>
>>> out:
>>> @@ -586,7 +566,7 @@ static const struct net_device_ops ax88772_netdev_ops = {
>>> .ndo_get_stats64 = dev_get_tstats64,
>>> .ndo_set_mac_address = asix_set_mac_address,
>>> .ndo_validate_addr = eth_validate_addr,
>>> - .ndo_do_ioctl = asix_ioctl,
>>> + .ndo_do_ioctl = phy_do_ioctl_running,
>>> .ndo_set_rx_mode = asix_set_multicast,
>>> };
>>>
>>> @@ -677,12 +657,57 @@ static int asix_resume(struct usb_interface *intf)
>>> return usbnet_resume(intf);
>>> }
>>>
>>> +static int ax88772_init_mdio(struct usbnet *dev)
>>> +{
>>> + struct asix_common_private *priv = dev->driver_priv;
>>> +
>>> + priv->mdio = devm_mdiobus_alloc(&dev->udev->dev);
>>> + if (!priv->mdio)
>>> + return -ENOMEM;
>>> +
>>> + priv->mdio->priv = dev;
>>> + priv->mdio->read = &asix_mdio_bus_read;
>>> + priv->mdio->write = &asix_mdio_bus_write;
>>> + priv->mdio->name = "Asix MDIO Bus";
>>> + /* mii bus name is usb-<usb bus number>-<usb device number> */
>>> + snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
>>> + dev->udev->bus->busnum, dev->udev->devnum);
>>> +
>>> + return devm_mdiobus_register(&dev->udev->dev, priv->mdio);
>>> +}
>>> +
>>> +static int ax88772_init_phy(struct usbnet *dev)
>>> +{
>>> + struct asix_common_private *priv = dev->driver_priv;
>>> + int ret;
>>> +
>>> + priv->phy_addr = asix_read_phy_addr(dev, true);
>>> + if (priv->phy_addr < 0)
>>> + return priv->phy_addr;
>>> +
>>> + snprintf(priv->phy_name, sizeof(priv->phy_name), PHY_ID_FMT,
>>> + priv->mdio->id, priv->phy_addr);
>>> +
>>> + priv->phydev = phy_connect(dev->net, priv->phy_name, &asix_adjust_link,
>>> + PHY_INTERFACE_MODE_INTERNAL);
>>> + if (IS_ERR(priv->phydev)) {
>>> + netdev_err(dev->net, "Could not connect to PHY device %s\n",
>>> + priv->phy_name);
>>> + ret = PTR_ERR(priv->phydev);
>>> + return ret;
>>> + }
>>> +
>>> + phy_attached_info(priv->phydev);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
>>> {
>>> - int ret, i;
>>> u8 buf[ETH_ALEN] = {0}, chipcode = 0;
>>> - u32 phyid;
>>> struct asix_common_private *priv;
>>> + int ret, i;
>>> + u32 phyid;
>>>
>>> usbnet_get_endpoints(dev, intf);
>>>
>>> @@ -714,17 +739,6 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
>>>
>>> asix_set_netdev_dev_addr(dev, buf);
>>>
>>> - /* Initialize MII structure */
>>> - dev->mii.dev = dev->net;
>>> - dev->mii.mdio_read = asix_mdio_read;
>>> - dev->mii.mdio_write = asix_mdio_write;
>>> - dev->mii.phy_id_mask = 0x1f;
>>> - dev->mii.reg_num_mask = 0x1f;
>>> -
>>> - dev->mii.phy_id = asix_read_phy_addr(dev, true);
>>> - if (dev->mii.phy_id < 0)
>>> - return dev->mii.phy_id;
>>> -
>>> dev->net->netdev_ops = &ax88772_netdev_ops;
>>> dev->net->ethtool_ops = &ax88772_ethtool_ops;
>>> dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
>>> @@ -768,11 +782,31 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
>>> priv->suspend = ax88772_suspend;
>>> }
>>>
>>> + ret = ax88772_init_mdio(dev);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + return ax88772_init_phy(dev);
>>> +}
>>> +
>>> +static int ax88772_stop(struct usbnet *dev)
>>> +{
>>> + struct asix_common_private *priv = dev->driver_priv;
>>> +
>>> + /* On unplugged USB, we will get MDIO communication errors and the
>>> + * PHY will be set in to PHY_HALTED state.
>>> + */
>>> + if (priv->phydev->state != PHY_HALTED)
>>> + phy_stop(priv->phydev);
>>> +
>>> return 0;
>>> }
>>>
>>> static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
>>> {
>>> + struct asix_common_private *priv = dev->driver_priv;
>>> +
>>> + phy_disconnect(priv->phydev);
>>> asix_rx_fixup_common_free(dev->driver_priv);
>>> }
>>>
>>> @@ -1161,8 +1195,8 @@ static const struct driver_info ax88772_info = {
>>> .bind = ax88772_bind,
>>> .unbind = ax88772_unbind,
>>> .status = asix_status,
>>> - .link_reset = ax88772_link_reset,
>>> .reset = ax88772_reset,
>>> + .stop = ax88772_stop,
>>> .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
>>> .rx_fixup = asix_rx_fixup_common,
>>> .tx_fixup = asix_tx_fixup,
>>> @@ -1173,7 +1207,6 @@ static const struct driver_info ax88772b_info = {
>>> .bind = ax88772_bind,
>>> .unbind = ax88772_unbind,
>>> .status = asix_status,
>>> - .link_reset = ax88772_link_reset,
>>> .reset = ax88772_reset,
>>> .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
>>> FLAG_MULTI_PACKET,
>>> @@ -1209,7 +1242,6 @@ static const struct driver_info hg20f9_info = {
>>> .bind = ax88772_bind,
>>> .unbind = ax88772_unbind,
>>> .status = asix_status,
>>> - .link_reset = ax88772_link_reset,
>>> .reset = ax88772_reset,
>>> .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
>>> FLAG_MULTI_PACKET,
>>> diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c
>>> index c8ca5187eece..2e2081346740 100644
>>> --- a/drivers/net/usb/ax88172a.c
>>> +++ b/drivers/net/usb/ax88172a.c
>>> @@ -25,20 +25,6 @@ struct ax88172a_private {
>>> struct asix_rx_fixup_info rx_fixup_info;
>>> };
>>>
>>> -/* MDIO read and write wrappers for phylib */
>>> -static int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
>>> -{
>>> - return asix_mdio_read(((struct usbnet *)bus->priv)->net, phy_id,
>>> - regnum);
>>> -}
>>> -
>>> -static int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum,
>>> - u16 val)
>>> -{
>>> - asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val);
>>> - return 0;
>>> -}
>>> -
>>> /* set MAC link settings according to information from phylib */
>>> static void ax88172a_adjust_link(struct net_device *netdev)
>>> {
>>
>> Best regards
>> --
>> Marek Szyprowski, PhD
>> Samsung R&D Institute Poland
>>
>>
>

Next message: 刘海龙(DuckBuBee): "回复: [PATCH] staging: android: ashmem: add size field in procfs fdinfo"
Previous message: gumingtao: "[PATCH] slab: Use %s instead of function name"
In reply to: Oleksij Rempel: "Re: [PATCH net-next v2 4/8] net: usb: asix: ax88772: add phylib support"
Next in thread: Marek Szyprowski: "Re: [PATCH net-next v2 4/8] net: usb: asix: ax88772: add phylib support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]