[PATCH v1] hwmon: (lm90) Use edge-triggered interrupt

[Dmitry Osipenko]

The LM90 driver uses level-based interrupt triggering. The interrupt
handler prints a warning message about the breached temperature and
quits. There is no way to stop interrupt from re-triggering since it's
level-based, thus thousands of warning messages are printed per second
once interrupt is triggered. Use edge-triggered interrupt in order to
fix this trouble.

Fixes: 109b1283fb532 ("hwmon: (lm90) Add support to handle IRQ")
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 drivers/hwmon/lm90.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index ebbfd5f352c0..ce8ebe60fcdc 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -1908,7 +1908,7 @@ static int lm90_probe(struct i2c_client *client)
 		dev_dbg(dev, "IRQ: %d\n", client->irq);
 		err = devm_request_threaded_irq(dev, client->irq,
 						NULL, lm90_irq_thread,
-						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+						IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 						"lm90", client);
 		if (err < 0) {
 			dev_err(dev, "cannot request IRQ %d\n", client->irq);
-- 
2.30.2