[RESEND, V5 1/2] dt-bindings: imx6q-pcie: Add "vph-supply" for PHY supply voltage

From: Richard Zhu
Date: Thu Jun 03 2021 - 22:05:37 EST


The i.MX8MQ PCIe PHY can use either a 1.8V or a 3.3V power supply.
Add a "vph-supply" property to indicate which regulator supplies
power for the PHY.

Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index de4b2baf91e8..d8971ab99274 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -38,6 +38,9 @@ Optional properties:
The regulator will be enabled when initializing the PCIe host and
disabled either as part of the init process or when shutting down the
host.
+- vph-supply: Should specify the regulator in charge of VPH one of the three
+ PCIe PHY powers. This regulator can be supplied by both 1.8v and 3.3v voltage
+ supplies.

Additional required properties for imx6sx-pcie:
- clock names: Must include the following additional entries:
--
2.17.1