Re: [PATCH v4 2/4] mtd: spi-nor: otp: use more consistent wording

From: Tudor.Ambarus
Date: Mon May 31 2021 - 04:28:46 EST


On 5/21/21 10:40 PM, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Use the wording as used in the datasheet to describe the access methods
> of the security registers (aka OTP storage). This will also match the
> function names.
>
> Signed-off-by: Michael Walle <michael@xxxxxxxx>
> Reviewed-by: Pratyush Yadav <p.yadav@xxxxxx>

Reviewed-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>

> ---
> drivers/mtd/spi-nor/otp.c | 27 +++++++++++++++++++--------
> 1 file changed, 19 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/otp.c b/drivers/mtd/spi-nor/otp.c
> index 91a4c510ed51..3898ed67ba1c 100644
> --- a/drivers/mtd/spi-nor/otp.c
> +++ b/drivers/mtd/spi-nor/otp.c
> @@ -15,14 +15,21 @@
> #define spi_nor_otp_n_regions(nor) ((nor)->params->otp.org->n_regions)
>
> /**
> - * spi_nor_otp_read_secr() - read OTP data
> + * spi_nor_otp_read_secr() - read security register
> * @nor: pointer to 'struct spi_nor'
> * @addr: offset to read from
> * @len: number of bytes to read
> * @buf: pointer to dst buffer
> *
> - * Read OTP data from one region by using the SPINOR_OP_RSECR commands. This
> - * method is used on GigaDevice and Winbond flashes.
> + * Read a security register by using the SPINOR_OP_RSECR commands.
> + *
> + * In Winbond/GigaDevice datasheets the term "security register" stands for
> + * an one-time-programmable memory area, consisting of multiple bytes (usually
> + * 256). Thus one "security register" maps to one OTP region.
> + *
> + * This method is used on GigaDevice and Winbond flashes.
> + *
> + * Please note, the read must not span multiple registers.
> *
> * Return: number of bytes read successfully, -errno otherwise
> */
> @@ -56,16 +63,20 @@ int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf)
> }
>
> /**
> - * spi_nor_otp_write_secr() - write OTP data
> + * spi_nor_otp_write_secr() - write security register
> * @nor: pointer to 'struct spi_nor'
> * @addr: offset to write to
> * @len: number of bytes to write
> * @buf: pointer to src buffer
> *
> - * Write OTP data to one region by using the SPINOR_OP_PSECR commands. This
> - * method is used on GigaDevice and Winbond flashes.
> + * Write a security register by using the SPINOR_OP_PSECR commands.
> + *
> + * For more information on the term "security register", see the documentation
> + * of spi_nor_otp_read_secr().
> + *
> + * This method is used on GigaDevice and Winbond flashes.
> *
> - * Please note, the write must not span multiple OTP regions.
> + * Please note, the write must not span multiple registers.
> *
> * Return: number of bytes written successfully, -errno otherwise
> */
> @@ -88,7 +99,7 @@ int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len,
>
> /*
> * We only support a write to one single page. For now all winbond
> - * flashes only have one page per OTP region.
> + * flashes only have one page per security register.
> */
> ret = spi_nor_write_enable(nor);
> if (ret)
> --
> 2.20.1
>