Re: [PATCH v4 0/8] Introduce intel_skl_int3472 module

From: Andy Shevchenko
Date: Tue May 25 2021 - 09:23:37 EST


On Tue, May 25, 2021 at 03:12:45PM +0200, Hans de Goede wrote:
> On 5/25/21 3:10 PM, Hans de Goede wrote:
> > On 5/20/21 4:09 PM, Daniel Scally wrote:
> >> Apologies for the long delay since the last version of this series; the time I
> >> had free to work on it became somewhat restrained.
> >
> > No worries, thank you for all the work you are putting into this.
> >
> > I have not taken a close look at the code yet, but I see that Andy has and
> > the amount of remarks which he has on patch 7/8 which is the big one seems
> > to be limited, so I believe that we are getting close to this being ready
> > for merging.
> >
> > This touches a lot of subsystems, so we need to come up with a plan to
> > merge this. Here is my proposal for how to do this:
> >
> > 1/8 ACPI: scan: Extend acpi_walk_dep_device_list()
> > 2/8 ACPI: scan: Add function to fetch dependent of acpi device
> > 3/8 i2c: core: Add a format macro for I2C device names
> > 4/8 gpiolib: acpi: Export acpi_get_gpiod()
> > 5/8 clkdev: Make clkdev_drop() null aware
> > 6/8 gpiolib: acpi: Add acpi_gpio_get_io_resource()
> > 7/8 platform/x86: Add intel_skl_int3472 driver
> > 8/8 mfd: tps68470: Remove tps68470 MFD driver
> >
> > Rafael already indicated that he wants to merge 1/8 (and presumably also 2/8)
> > through his tree and that he will provide an immutable branch with those
> > for merging into the pdx86 tree.
>
> p.s.
>
> Daniel it would be good if you can at least send a v5 of patch 2/8 with
> the suggested renames, then Rafael can merge 1/8 + 2/8 and we are down to 6
> patches (4 if we also merge the i2c + clk patches independently).

I would also prefer GPIO ACPI patches to be grouped together, so I can simply
take them in a row.

> > 4/8 and 6/8 are both gpiolib-acpi patches and seem to be ready for merging
> > now, perhaps the gpiolib-acpi maintainers can already merge these and also
> > provide an immutable branch ? Andy/Mika ?

Fine with me. Just need Mika's Ack / Rb tag.

> > 3/8 and 5/8 seem to be nice cleanups, but not really necessary. IMHO it
> > would be best to park these cleanups for later and for 3/8 add the following
> > where necessary for now:
> >
> > /* FIXME drop this once the I2C_DEV_NAME_FORMAT macro has been added to include/linux/i2c.h */
> > #ifndef I2C_DEV_NAME_FORMAT
> > #define I2C_DEV_NAME_FORMAT "i2c-%s"
> > #endif
> >
> > This is not the prettiest but it reduces all the subsys cross-deps and things
> > like this have been done before for similar reasons.
> >
> > Likewise it would be good if you can add if (foo) as condition before any
> > clkdev_drop(foo) calls in this patch-set and then merge
> > 5/8 "clkdev: Make clkdev_drop() null aware" independently of this and then
> > once both are in Linux tree follow-up with a cleanup patch dropping the if (foo)
> > guards.
> >
> > So this would leave as deps for 7/8 just the 2 ACPI and 2 gpiolib-acpi patches
> > which I can hopefully pull-in via immutable branches and then we are good.
> >
> > AFAICT patch 8/8 can be merged independently once 7/8 hits for-next (IOW once
> > we are sure the next kernel will have 7/8).
> >
> > Or alternatively one of the involved subsys maintainers just merges the entire
> > set (once it is ready) and then provides an immutable branch with the entire set
> > on top of 5.13-rc1 (or 5.14-rc1). But that requires acks from all the other
> > subsys maintainers. Note I'm fine with either approach.

> >> v1 for this series was originally 14-18 of this series:
> >> https://lore.kernel.org/linux-media/20201130133129.1024662-1-djrscally@xxxxxxxxx/T/#m91934e12e3d033da2e768e952ea3b4a125ee3e67
> >>
> >> v2 was here:
> >> https://lore.kernel.org/platform-driver-x86/20210118003428.568892-1-djrscally@xxxxxxxxx/
> >>
> >> v3 was here:
> >> https://lore.kernel.org/lkml/20210222130735.1313443-1-djrscally@xxxxxxxxx/
> >>
> >> Series level changelog:
> >>
> >> - Added patch 5/8 to make clkdev_drop() NULL aware to simplify error
> >> handling.
> >> - Added patch 6/8 to add acpi_gpio_get_io_resource().
> >>
> >> This has been tested on a number of devices, but currently **not** on a device
> >> designed for ChromeOS, which we ideally need to do to ensure no regression
> >> caused by replacing the tps68470 MFD driver. Unfortunately, I don't have a
> >> device to test it on myself.
> >>
> >> =========== Original Cover Letter ===========
> >>
> >> At the moment in the kernel the ACPI _HID INT3472 is taken by the tps68470
> >> MFD driver, but that driver can only handle some of the cases of that _HID
> >> that we see. There are at least these three possibilities:
> >>
> >> 1. INT3472 devices that provide GPIOs through the usual framework and run
> >> power and clocks through an operation region; this is the situation that
> >> the current module handles and is seen on ChromeOS devices
> >> 2. INT3472 devices that provide GPIOs, plus clocks and regulators that are
> >> meant to be driven through the usual frameworks, usually seen on devices
> >> designed to run Windows
> >> 3. INT3472 devices that don't actually represent a physical tps68470, but
> >> are being used as a convenient way of grouping a bunch of system GPIO
> >> lines that are intended to enable power and clocks for sensors which
> >> are called out as dependent on them. Also seen on devices designed to
> >> run Windows.
> >>
> >> This series introduces a new module which registers:
> >>
> >> 1. An i2c driver that determines which scenario (#1 or #2) applies to the
> >> machine and registers platform devices to be bound to GPIO, OpRegion,
> >> clock and regulator drivers as appropriate.
> >> 2. A platform driver that binds to the dummy INT3472 devices described in
> >> #3
> >>
> >> The platform driver for the dummy device registers the GPIO lines that
> >> enable the clocks and regulators to the sensors via those frameworks so
> >> that sensor drivers can consume them in the usual fashion. The existing
> >> GPIO and OpRegion tps68470 drivers will work with the i2c driver that's
> >> registered. Clock and regulator drivers are available but have not so far been
> >> tested, so aren't part of this series.
> >>
> >> The existing mfd/tps68470.c driver being thus superseded, it is removed.
> >>
> >> Thanks
> >> Dan
> >>
> >> Daniel Scally (8):
> >> ACPI: scan: Extend acpi_walk_dep_device_list()
> >> ACPI: scan: Add function to fetch dependent of acpi device
> >> i2c: core: Add a format macro for I2C device names
> >> gpiolib: acpi: Export acpi_get_gpiod()
> >> clkdev: Make clkdev_drop() null aware
> >> gpiolib: acpi: Add acpi_gpio_get_io_resource()
> >> platform/x86: Add intel_skl_int3472 driver
> >> mfd: tps68470: Remove tps68470 MFD driver
> >>
> >> MAINTAINERS | 5 +
> >> drivers/acpi/ec.c | 2 +-
> >> drivers/acpi/pmic/Kconfig | 2 +-
> >> drivers/acpi/pmic/intel_pmic_chtdc_ti.c | 2 +-
> >> drivers/acpi/scan.c | 107 ++++-
> >> drivers/clk/clkdev.c | 3 +
> >> drivers/gpio/Kconfig | 2 +-
> >> drivers/gpio/gpiolib-acpi.c | 61 ++-
> >> drivers/i2c/i2c-core-acpi.c | 8 +-
> >> drivers/i2c/i2c-core-base.c | 4 +-
> >> drivers/mfd/Kconfig | 18 -
> >> drivers/mfd/Makefile | 1 -
> >> drivers/mfd/tps68470.c | 97 -----
> >> drivers/platform/surface/aggregator/core.c | 6 +-
> >> drivers/platform/surface/surface3_power.c | 22 +-
> >> .../platform/surface/surface_acpi_notify.c | 7 +-
> >> drivers/platform/x86/Kconfig | 2 +
> >> drivers/platform/x86/Makefile | 1 +
> >> drivers/platform/x86/intel-int3472/Kconfig | 31 ++
> >> drivers/platform/x86/intel-int3472/Makefile | 5 +
> >> .../intel_skl_int3472_clk_and_regulator.c | 195 +++++++++
> >> .../intel-int3472/intel_skl_int3472_common.c | 106 +++++
> >> .../intel-int3472/intel_skl_int3472_common.h | 113 +++++
> >> .../intel_skl_int3472_discrete.c | 409 ++++++++++++++++++
> >> .../intel_skl_int3472_tps68470.c | 109 +++++
> >> include/acpi/acpi_bus.h | 8 +
> >> include/linux/acpi.h | 11 +-
> >> include/linux/gpio/consumer.h | 2 +
> >> include/linux/i2c.h | 3 +
> >> 29 files changed, 1175 insertions(+), 167 deletions(-)
> >> delete mode 100644 drivers/mfd/tps68470.c
> >> create mode 100644 drivers/platform/x86/intel-int3472/Kconfig
> >> create mode 100644 drivers/platform/x86/intel-int3472/Makefile
> >> create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_clk_and_regulator.c
> >> create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_common.c
> >> create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_common.h
> >> create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_discrete.c
> >> create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c
> >>
>

--
With Best Regards,
Andy Shevchenko