[PATCH V3 1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver

From: Martin Botka
Date: Mon May 24 2021 - 15:31:11 EST


Document the newly added SM6125 pinctrl driver

Signed-off-by: Martin Botka <martin.botka@xxxxxxxxxxxxxx>
---
Changes in V2:
Add commit description
Changes in V3:
Fix syntax errors
Remove not needed state from example
.../bindings/pinctrl/qcom,sm6125-pinctrl.yaml | 134 ++++++++++++++++++
1 file changed, 134 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
new file mode 100644
index 000000000000..ab65092d688d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Qualcomm Technologies, Inc. SM6125 TLMM block
+
+maintainers:
+ - Martin Botka <martin.botka@xxxxxxxxxxxxxx>
+
+description: |
+ This binding describes the Top Level Mode Multiplexer (TLMM) block found
+ in the SM6125 platform.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm6125-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+ interrupt-controller: true
+ '#interrupt-cells': true
+ gpio-controller: true
+ gpio-reserved-ranges: true
+ '#gpio-cells': true
+ gpio-ranges: true
+ wakeup-parent: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+patternProperties:
+ '-state$':
+ oneOf:
+ - $ref: "#/$defs/qcom-sm6125-tlmm-state"
+ - patternProperties:
+ ".*":
+ $ref: "#/$defs/qcom-sm6125-tlmm-state"
+
+$defs:
+ qcom-sm6125-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+ atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1,
+ atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2,
+ atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb,
+ audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
+ cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+ ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk,
+ dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+ gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en,
+ ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1,
+ mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte,
+ nav_pps, pa_indicator, phase_flag0, phase_flag1, phase_flag10,
+ phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
+ phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2,
+ phase_flag20, phase_flag21, phase_flag22, phase_flag23, phase_flag24,
+ phase_flag25, phase_flag26, phase_flag27, phase_flag28, phase_flag29,
+ phase_flag3, phase_flag30, phase_flag31, phase_flag4, phase_flag5,
+ phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist,
+ pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb,
+ qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
+ qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2,
+ qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8,
+ qdss_gpio9, qlink_enable, qlink_request, qua_mi2s, qui_mi2s, qup00,
+ qup01, qup02, qup03, qup04, qup10, qup11, qup12, qup13, qup14,
+ sd_write, sec_mi2s, sp_cmu, swr_rx, swr_tx, ter_mi2s, tgu_ch0,
+ tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm, uim1_clk, uim1_data,
+ uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
+ uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger,
+ wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
+
+
+ bias-disable: true
+ bias-pull-down: true
+ bias-pull-up: true
+ drive-strength: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@500000 {
+ compatible = "qcom,sm6125-pinctrl";
+ reg = <0x00500000 0x400000>,
+ <0x00900000 0x400000>,
+ <0x00d00000 0x400000>;
+ reg-names = "west", "south", "east";
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 134>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
--
2.31.1