Re: [PATCH] siox: Simplify error handling via dev_err_probe()

[Thorsten Scherer]

Hello Uwe,

On Sat, May 15, 2021 at 08:00:47PM +0200, Uwe Kleine-König wrote:
> Hello Thorsten,
> 
> your mail is whitespace damaged and cannot be applied directly. As you
> used git-send-email this is probably a case for Eckelmann IT ...

I will resend the patch as soon as the issues with our IT are solved.

> On Sat, May 15, 2021 at 10:20:17AM +0200, Thorsten Scherer wrote:
> > a787e5400a1c ("driver core: add device probe log helper") introduced a
> > helper for a common error checking pattern.  Use it.
> 
> Please test your patch using scripts/checkpatch and fix the issued
> errors (or argument why you chose not to follow its recommendations).

I will fix this.

> > Signed-off-by: Thorsten Scherer <t.scherer@xxxxxxxxxxxx>
> > ---
> >  drivers/siox/siox-bus-gpio.c | 19 ++++++++++---------
> >  1 file changed, 10 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/siox/siox-bus-gpio.c b/drivers/siox/siox-bus-gpio.c
> > index 46b4cda36bac..aeefeb725524 100644
> > --- a/drivers/siox/siox-bus-gpio.c
> > +++ b/drivers/siox/siox-bus-gpio.c
> > @@ -102,29 +102,29 @@ static int siox_gpio_probe(struct platform_device *pdev)
> > 
> >         ddata->din = devm_gpiod_get(dev, "din", GPIOD_IN);
> >         if (IS_ERR(ddata->din)) {
> > -               ret = PTR_ERR(ddata->din);
> > -               dev_err(dev, "Failed to get %s GPIO: %d\n", "din", ret);
> > +               ret = dev_err_probe(dev, PTR_ERR(ddata->din),
> > +                                   "Failed to get din GPIO\n");
> 
> Huh, I'm surprised. I did
> 
> diff --git a/drivers/siox/siox-bus-gpio.c b/drivers/siox/siox-bus-gpio.c
> index aeefeb725524..b97fde71a6a0 100644
> --- a/drivers/siox/siox-bus-gpio.c
> +++ b/drivers/siox/siox-bus-gpio.c
> @@ -103,28 +103,28 @@ static int siox_gpio_probe(struct platform_device *pdev)
>  	ddata->din = devm_gpiod_get(dev, "din", GPIOD_IN);
>  	if (IS_ERR(ddata->din)) {
>  		ret = dev_err_probe(dev, PTR_ERR(ddata->din),
> -				    "Failed to get din GPIO\n");
> +				    "Failed to get %s GPIO\n", "din");
>  		goto err;
>  	}
>  
>  	ddata->dout = devm_gpiod_get(dev, "dout", GPIOD_OUT_LOW);
>  	if (IS_ERR(ddata->dout)) {
>  		ret = dev_err_probe(dev, PTR_ERR(ddata->dout),
> -				    "Failed to get dout GPIO\n");
> +				    "Failed to get %s GPIO\n", "dout");
>  		goto err;
>  	}
>  
>  	ddata->dclk = devm_gpiod_get(dev, "dclk", GPIOD_OUT_LOW);
>  	if (IS_ERR(ddata->dclk)) {
>  		ret = dev_err_probe(dev, PTR_ERR(ddata->dclk),
> -				    "Failed to get dclk GPIO\n");
> +				    "Failed to get %s GPIO\n", "dclk");
>  		goto err;
>  	}
>  
>  	ddata->dld = devm_gpiod_get(dev, "dld", GPIOD_OUT_LOW);
>  	if (IS_ERR(ddata->dld)) {
>  		ret = dev_err_probe(dev, PTR_ERR(ddata->dld),
> -				    "Failed to get dld GPIO\n");
> +				    "Failed to get %s GPIO\n", "dld");
>  		goto err;
>  	}
>  
> on top of your patch and the binary size increased (using ARCH=arm and
> gcc 7.3.1). So no objection from me to get rid of this idiom.
> 
> >                 goto err;
> >         }
> > 
> >         ddata->dout = devm_gpiod_get(dev, "dout", GPIOD_OUT_LOW);
> >         if (IS_ERR(ddata->dout)) {
> > -               ret = PTR_ERR(ddata->dout);
> > -               dev_err(dev, "Failed to get %s GPIO: %d\n", "dout", ret);
> > +               ret = dev_err_probe(dev, PTR_ERR(ddata->dout),
> > +                                   "Failed to get dout GPIO\n");
> >                 goto err;
> >         }
> > 
> >         ddata->dclk = devm_gpiod_get(dev, "dclk", GPIOD_OUT_LOW);
> >         if (IS_ERR(ddata->dclk)) {
> > -               ret = PTR_ERR(ddata->dclk);
> > -               dev_err(dev, "Failed to get %s GPIO: %d\n", "dclk", ret);
> > +               ret = dev_err_probe(dev, PTR_ERR(ddata->dclk),
> > +                                   "Failed to get dclk GPIO\n");
> >                 goto err;
> >         }
> > 
> >         ddata->dld = devm_gpiod_get(dev, "dld", GPIOD_OUT_LOW);
> >         if (IS_ERR(ddata->dld)) {
> > -               ret = PTR_ERR(ddata->dld);
> > -               dev_err(dev, "Failed to get %s GPIO: %d\n", "dld", ret);
> > +               ret = dev_err_probe(dev, PTR_ERR(ddata->dld),
> > +                                   "Failed to get dld GPIO\n");
> >                 goto err;
> >         }
> > 
> > @@ -134,7 +134,8 @@ static int siox_gpio_probe(struct platform_device *pdev)
> > 
> >         ret = siox_master_register(smaster);
> >         if (ret) {
> > -               dev_err(dev, "Failed to register siox master: %d\n", ret);
> > +               dev_err_probe(dev, ret,
> > +                             "Failed to register siox master\n");
> >  err:
> >                 siox_master_put(smaster);
> >         }
> > --
> > 2.29.2
> > 
> > Eckelmann AG
> > Vorstand: Dipl.-Ing. Peter Frankenbach (Sprecher) Dipl.-Wi.-Ing. Philipp Eckelmann
> > Dr.-Ing. Marco M?nchhof
> 
> Another issue for your IT department: Tell them please to not append
> latin1 encoded footers to mails that don't declare an encoding (and so
> are implicitly ASCII only).

Will do so.

> I didn't check but I assume this will earn
> you a few spam assassin points ...

Thank you for pointing things out.

> Best regards
> Uwe
> 
> -- 
> Pengutronix e.K.                           | Uwe Kleine-König            |
> Industrial Linux Solutions                 | https://www.pengutronix.de/ |

Best regards
Thorsten

--
Thorsten Scherer | Eckelmann AG | www.eckelmann.de |