[PATCH v1 2/2] dt-bindings: iio: adc: devicetree bindings for texas instruments ads7142 iio driver

[Jozsef Horvath]

This is a device tree schema for iio driver for
 Texas Instruments ADS7142 dual-channel, programmable sensor monitor.

Datasheet: https://www.ti.com/lit/ds/symlink/ads7142.pdf

Signed-off-by: Jozsef Horvath <info@xxxxxxxxxxx>
---

changes v1
  - Redundant parameters (ti,threshold-rising, etc.)
    are removed
  - Supply name changed(vref -> avdd)
  - Added dvdd supply
  - All the properties are removed with prefix "ti,"
---
 .../bindings/iio/adc/ti,ads7142.yaml          | 99 +++++++++++++++++++
 1 file changed, 99 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml
new file mode 100644
index 000000000000..e4d701d1b2c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/adc/ti,ads7142.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: Texas Instruments ADS7142 adc driver device tree bindings
+
+maintainers:
+  - József Horváth <info@xxxxxxxxxxx>
+
+description: |
+  This document is for describing the required device tree parameters
+   for ads7142 adc
+  The required parameters for proper operation are described below.
+
+  Datasheet: https://www.ti.com/lit/ds/symlink/ads7142.pdf
+
+properties:
+  compatible:
+    const: ti,ads7142
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      The BUSY/PDY pin is used as interrupt line in autonomous monitoring mode.
+    maxItems: 1
+
+  avdd-supply:
+    description: Regulator for the reference voltage
+
+  dvdd-supply: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+patternProperties:
+  "^channel@[0-1]$":
+    $ref: "adc.yaml"
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+    properties:
+      reg:
+        description: |
+          The channel number.
+        items:
+          minimum: 0
+          maximum: 1
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      adc@1f {
+        compatible = "ti,ads7142";
+        reg = <0x1f>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        #io-channel-cells = <1>;
+
+        avdd-supply = <&vdd_3v3_reg>;
+        dvdd-supply = <&vdd_1v8_reg>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <7 2>;
+
+        channel@0 {
+          reg = <0>;
+        };
+
+        channel@1 {
+          reg = <1>;
+        };
+      };
+    };
+...
+
-- 
2.17.1