[PATCH 2/2] ARM: dts: qcom: sdx55-telit: Represent secure-regions as 64-bit elements

[Manivannan Sadhasivam]

The corresponding MTD code expects the regions to be of 64-bit elements.
Hence, prefix "/bits/ 64", otherwise the regions will not be parsed
correctly.

Fixes: 6a5d3c611930 ("ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
index 3065f84634b8..80c40da79604 100644
--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
@@ -250,8 +250,8 @@ nand@0 {
 		nand-ecc-step-size = <512>;
 		nand-bus-width = <8>;
 		/* ico and efs2 partitions are secured */
-		secure-regions = <0x500000 0x500000
-				  0xa00000 0xb00000>;
+		secure-regions = /bits/ 64 <0x500000 0x500000
+					    0xa00000 0xb00000>;
 	};
 };
 
-- 
2.25.1