[PATCH 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix

From: Sander Vanheule
Date: Tue May 11 2021 - 08:25:48 EST


Add a binding description for the Realtek RTL8231's LED support, which
consists of up to 88 LEDs arranged in a number of scanning matrices.

Signed-off-by: Sander Vanheule <sander@xxxxxxxxxxxxx>
---
.../bindings/leds/realtek,rtl8231-leds.yaml | 159 ++++++++++++++++++
1 file changed, 159 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/realtek,rtl8231-leds.yaml

diff --git a/Documentation/devicetree/bindings/leds/realtek,rtl8231-leds.yaml b/Documentation/devicetree/bindings/leds/realtek,rtl8231-leds.yaml
new file mode 100644
index 000000000000..aba2b55fb9c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/realtek,rtl8231-leds.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/realtek,rtl8231-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL8231 LED scan matrix.
+
+maintainers:
+ - Sander Vanheule <sander@xxxxxxxxxxxxx>
+
+description: |
+ The RTL8231 has support for driving a number of LED matrices, by scanning
+ over the LEDs pins, alternatingly lighting different columns and/or rows.
+
+ In single color scan mode, 88 LEDs are supported. These are grouped into
+ three output matrices:
+ - Group A of 6×6 single color LEDs. Rows and columns are driven by GPIO
+ pins 0-11.
+ L0[n] L1[n] L2[n] L0[n+6] L1[n+6] L2[n+6]
+ | | | | | |
+ P0/P6 --<--------<--------<--------<--------<--------< (3)
+ | | | | | |
+ P1/P7 --<--------<--------<--------<--------<--------< (4)
+ | | | | | |
+ P2/P8 --<--------<--------<--------<--------<--------< (5)
+ | | | | | |
+ P3/P9 --<--------<--------<--------<--------<--------< (6)
+ | | | | | |
+ P4/P10 --<--------<--------<--------<--------<--------< (7)
+ | | | | | |
+ P5/P11 --<--------<--------<--------<--------<--------< (8)
+ (0) (1) (2) (9) (10) (11)
+ - Group B of 6×6 single color LEDs. Rows and columns are driven by GPIO
+ pins 12-23.
+ L0[n] L1[n] L2[n] L0[n+6] L1[n+6] L2[n+6]
+ | | | | | |
+ P12/P18 --<--------<--------<--------<--------<--------< (15)
+ | | | | | |
+ P13/P19 --<--------<--------<--------<--------<--------< (16)
+ | | | | | |
+ P14/P20 --<--------<--------<--------<--------<--------< (17)
+ | | | | | |
+ P15/P21 --<--------<--------<--------<--------<--------< (18)
+ | | | | | |
+ P16/P22 --<--------<--------<--------<--------<--------< (19)
+ | | | | | |
+ P17/P23 --<--------<--------<--------<--------<--------< (20)
+ (12) (13) (14) (21) (22) (23)
+ - Group C of 8 pairs of anti-parallel (or bi-color) LEDs. LED selection is
+ provided by GPIO pins 24-27 and 29-32, polarity selection by GPIO 28.
+ P24 P25 ... P30 P31
+ | | | |
+ LED POL --X-------X---/\/---X-------X (28)
+ (24) (25) ... (31) (32)
+
+ In bi-color scan mode, 72 LEDs are supported. These are grouped into four
+ output matrices:
+ - Group A of 12 pairs of anti-parallel LEDs. LED selection is provided
+ by GPIO pins 0-11, polarity selection by GPIO 12.
+ - Group B of 6 pairs of anti-parallel LEDs. LED selection is provided
+ by GPIO pins 23-28, polarity selection by GPIO 21.
+ - Group C of 6 pairs of anti-parallel LEDs. LED selection is provided
+ by GPIO pins 29-34, polarity selection by GPIO 22.
+ - Group of 4×6 single color LEDs. Rows are driven by GPIO pins 15-20,
+ columns by GPIO pins 13-14 and 21-22 (shared with groups B and C).
+ P[n] P[n+6] P[n+12] P[n+18]
+ | | | |
+ +0 --<--------<--------<--------< (15)
+ | | | |
+ +1 --<--------<--------<--------< (16)
+ | | | |
+ +2 --<--------<--------<--------< (17)
+ | | | |
+ +3 --<--------<--------<--------< (18)
+ | | | |
+ +4 --<--------<--------<--------< (19)
+ | | | |
+ +6 --<--------<--------<--------< (20)
+ (13) (14) (21) (22)
+
+ This node must always be a child of a 'realtek,rtl8231' node.
+
+properties:
+ $nodename:
+ const: leds
+
+ compatible:
+ const: realtek,rtl8231-leds
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 0
+
+ realtek,led-scan-mode:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: |
+ Specify the scanning mode the chip should run in. See general description
+ for how the scanning matrices are wired up.
+ enum: ["single-color", "bi-color"]
+
+patternProperties:
+ "^led@[0-9]+,[0-2]$":
+ description: |
+ LEDs are addressed by their port index and led index. Ports 0-23 always
+ support three LEDs. Additionally, but only when used in single color scan
+ mode, ports 24-31 support two LEDs.
+ type: object
+
+ properties:
+ reg:
+ maxItems: 1
+
+ allOf:
+ - $ref: ../leds/common.yaml#
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+ - realtek,led-scan-mode
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+ leds {
+ compatible = "realtek,rtl8231-leds";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ realtek,led-scan-mode = "single-color";
+
+ led@0,0 {
+ reg = <0 0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <0>;
+ };
+
+ led@0,1 {
+ reg = <0 1>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <0>;
+ };
+
+ led@0,2 {
+ reg = <0 2>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ };
+ };
--
2.31.1