Re: [PATCH][v2] rtnetlink: add rtnl_lock debug log

From: Andy Shevchenko
Date: Sun May 09 2021 - 05:42:46 EST


On Sat, May 8, 2021 at 12:11 PM Rocco Yue <rocco.yue@xxxxxxxxxxxx> wrote:
>
> We often encounter system hangs caused by certain process
> holding rtnl_lock for a long time. Even if there is a lock
> detection mechanism in Linux, it is a bit troublesome and
> affects the system performance. We hope to add a lightweight
> debugging mechanism for detecting rtnl_lock.
>
> Up to now, we have discovered and solved some potential bugs
> through this lightweight rtnl_lock debugging mechanism, which
> is helpful for us.
>
> When you say Y for RTNL_LOCK_DEBUG, then the kernel will detect
> if any function hold rtnl_lock too long and some key information
> will be printed out to help locate the problem.
>
> i.e: from the following logs, we can clearly know that the pid=2206
> RfxSender_4 process holds rtnl_lock for a long time, causing the
> system to hang. And we can also speculate that the delay operation
> may be performed in devinet_ioctl(), resulting in rtnl_lock was
> not released in time.
>
> <6>[ 40.191481][ C6] rtnetlink: -- rtnl_print_btrace start --

You don't seem to get it. It's a quite long trace for the commit
message. Do you need all those lines below? Why?

> <6>[ 40.191494][ C6] rtnetlink: RfxSender_4[2206][R] hold rtnl_lock
> more than 2 sec, start time: 38181400013
> <4>[ 40.191510][ C6] devinet_ioctl+0x1fc/0x75c
> <4>[ 40.191517][ C6] inet_ioctl+0xb8/0x1f8
> <4>[ 40.191527][ C6] sock_do_ioctl+0x70/0x2ac
> <4>[ 40.191533][ C6] sock_ioctl+0x5dc/0xa74
> <4>[ 40.191541][ C6] __arm64_sys_ioctl+0x178/0x1fc
> <4>[ 40.191548][ C6] el0_svc_common+0xc0/0x24c
> <4>[ 40.191555][ C6] el0_svc+0x28/0x88
> <4>[ 40.191560][ C6] el0_sync_handler+0x8c/0xf0
> <4>[ 40.191566][ C6] el0_sync+0x198/0x1c0
> <6>[ 40.191571][ C6] Call trace:
> <6>[ 40.191586][ C6] rtnl_print_btrace+0xf0/0x124
> <6>[ 40.191595][ C6] call_timer_fn+0x5c/0x3b4
> <6>[ 40.191602][ C6] expire_timers+0xe0/0x49c
> <6>[ 40.191609][ C6] __run_timers+0x34c/0x48c
> <6>[ 40.191616][ C6] run_timer_softirq+0x28/0x58
> <6>[ 40.191621][ C6] efi_header_end+0x168/0x690
> <6>[ 40.191628][ C6] __irq_exit_rcu+0x108/0x124
> <6>[ 40.191635][ C6] __handle_domain_irq+0x130/0x1b4
> <6>[ 40.191643][ C6] gic_handle_irq.29882+0x6c/0x2d8
> <6>[ 40.191648][ C6] el1_irq+0xdc/0x1c0
> <6>[ 40.191656][ C6] __delay+0xc0/0x180
> <6>[ 40.191663][ C6] devinet_ioctl+0x21c/0x75c
> <6>[ 40.191668][ C6] inet_ioctl+0xb8/0x1f8
> <6>[ 40.191675][ C6] sock_do_ioctl+0x70/0x2ac
> <6>[ 40.191682][ C6] sock_ioctl+0x5dc/0xa74
> <6>[ 40.191688][ C6] __arm64_sys_ioctl+0x178/0x1fc
> <6>[ 40.191694][ C6] el0_svc_common+0xc0/0x24c
> <6>[ 40.191699][ C6] el0_svc+0x28/0x88
> <6>[ 40.191705][ C6] el0_sync_handler+0x8c/0xf0
> <6>[ 40.191710][ C6] el0_sync+0x198/0x1c0
> <6>[ 40.191715][ C6] rtnetlink: -- rtnl_print_btrace end --
>
> <6>[ 42.181879][ T2206] rtnetlink: rtnl_lock is held by [2206] from
> [38181400013] to [42181875177]

--
With Best Regards,
Andy Shevchenko