Re: [PATCH 03/11] mmc: core: Re-structure some code in __mmc_poll_for_busy()

From: Shawn Lin
Date: Thu May 06 2021 - 21:48:39 EST


On 2021/5/5 0:12, Ulf Hansson wrote:
To make the code a bit more understandable, let's move the check about
whether polling is allowed or not, out to the caller instead. In this way,
we can also drop the send_status in-parameter, so let's do that.

Everytime I check the parameters for busy polling, I have to look very
closely to make sure what the true or false stands for. So reducing the
parameters here make sense.

Reviewed-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>


Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
drivers/mmc/core/mmc_ops.c | 27 +++++++++++++--------------
1 file changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 66ae699a410f..ccaee1cb7ff5 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -465,8 +465,7 @@ static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
}
static int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
- bool send_status, bool retry_crc_err,
- enum mmc_busy_cmd busy_cmd)
+ bool retry_crc_err, enum mmc_busy_cmd busy_cmd)
{
struct mmc_host *host = card->host;
int err;
@@ -475,16 +474,6 @@ static int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
bool expired = false;
bool busy = false;
- /*
- * In cases when not allowed to poll by using CMD13 or because we aren't
- * capable of polling by using ->card_busy(), then rely on waiting the
- * stated timeout to be sufficient.
- */
- if (!send_status && !host->ops->card_busy) {
- mmc_delay(timeout_ms);
- return 0;
- }
-
timeout = jiffies + msecs_to_jiffies(timeout_ms) + 1;
do {
/*
@@ -518,7 +507,7 @@ static int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
enum mmc_busy_cmd busy_cmd)
{
- return __mmc_poll_for_busy(card, timeout_ms, true, false, busy_cmd);
+ return __mmc_poll_for_busy(card, timeout_ms, false, busy_cmd);
}
bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd,
@@ -591,8 +580,18 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
mmc_host_is_spi(host))
goto out_tim;
+ /*
+ * If the host doesn't support HW polling via the ->card_busy() ops and
+ * when it's not allowed to poll by using CMD13, then we need to rely on
+ * waiting the stated timeout to be sufficient.
+ */
+ if (!send_status && !host->ops->card_busy) {
+ mmc_delay(timeout_ms);
+ goto out_tim;
+ }
+
/* Let's try to poll to find out when the command is completed. */
- err = __mmc_poll_for_busy(card, timeout_ms, send_status, retry_crc_err,
+ err = __mmc_poll_for_busy(card, timeout_ms, retry_crc_err,
MMC_BUSY_CMD6);
if (err)
goto out;