Re: [RFC PATCH vN net-next 2/2] net: mscc: ocelot: add support for VSC75XX SPI control

From: Vladimir Oltean
Date: Thu May 06 2021 - 06:22:12 EST


On Mon, May 03, 2021 at 10:11:27PM -0700, Colin Foster wrote:
> Add support for control for VSC75XX chips over SPI control. Starting with the
> VSC9959 code, this will utilize a spi bus instead of PCIe or memory-mapped IO to
> control the chip.
>
> Signed-off-by: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/rpi-vsc7512-spi-overlay.dts | 124 ++
> drivers/net/dsa/ocelot/Kconfig | 11 +
> drivers/net/dsa/ocelot/Makefile | 5 +
> drivers/net/dsa/ocelot/felix_vsc7512_spi.c | 1214 +++++++++++++++++
> include/soc/mscc/ocelot.h | 15 +
> 5 files changed, 1369 insertions(+)
> create mode 100644 arch/arm/boot/dts/rpi-vsc7512-spi-overlay.dts
> create mode 100644 drivers/net/dsa/ocelot/felix_vsc7512_spi.c
>
> diff --git a/drivers/net/dsa/ocelot/Kconfig b/drivers/net/dsa/ocelot/Kconfig
> index 932b6b6fe817..2db147ce9fe7 100644
> --- a/drivers/net/dsa/ocelot/Kconfig
> +++ b/drivers/net/dsa/ocelot/Kconfig
> @@ -14,6 +14,17 @@ config NET_DSA_MSCC_FELIX
> This driver supports the VSC9959 (Felix) switch, which is embedded as
> a PCIe function of the NXP LS1028A ENETC RCiEP.
>
> +config NET_DSA_MSCC_FELIX_SPI
> + tristate "Ocelot / Felix Ethernet SPI switch support"
> + depends on NET_DSA && SPI
> + depends on NET_VENDOR_MICROSEMI
> + select MSCC_OCELOT_SWITCH_LIB
> + select NET_DSA_TAG_OCELOT_8021Q
> + select NET_DSA_TAG_OCELOT
> + select PCS_LYNX

You most probably don't need to select PCS_LYNX (that's an NXP thing).
For that reason, you might want to call your module NET_DSA_MSCC_OCELOT_SPI.
The "felix" name is just the name of the common DSA driver and of the
VSC9959 chip. VSC7512 is probably called Ocelot-1 according to Microchip
marketing.

> + help
> + This driver supports the VSC75XX chips when controlled through SPI.
> +

Better mention which VSC75XX chips, that XX is pretty unspecific.

> config NET_DSA_MSCC_SEVILLE
> tristate "Ocelot / Seville Ethernet switch support"
> depends on NET_DSA
> diff --git a/drivers/net/dsa/ocelot/Makefile b/drivers/net/dsa/ocelot/Makefile
> index f6dd131e7491..f2c9c52ba76c 100644
> --- a/drivers/net/dsa/ocelot/Makefile
> +++ b/drivers/net/dsa/ocelot/Makefile
> @@ -1,11 +1,16 @@
> # SPDX-License-Identifier: GPL-2.0-only
> obj-$(CONFIG_NET_DSA_MSCC_FELIX) += mscc_felix.o
> +obj-$(CONFIG_NET_DSA_MSCC_FELIX_SPI) += mscc_felix_spi.o
> obj-$(CONFIG_NET_DSA_MSCC_SEVILLE) += mscc_seville.o
>
> mscc_felix-objs := \
> felix.o \
> felix_vsc9959.o
>
> +mscc_felix_spi-objs := \
> + felix.o \
> + felix_vsc7512_spi.o
> +
> mscc_seville-objs := \
> felix.o \
> seville_vsc9953.o
> diff --git a/drivers/net/dsa/ocelot/felix_vsc7512_spi.c b/drivers/net/dsa/ocelot/felix_vsc7512_spi.c
> new file mode 100644
> index 000000000000..1cb5758b752c
> --- /dev/null
> +++ b/drivers/net/dsa/ocelot/felix_vsc7512_spi.c

ocelot_vsc7512_spi.c maybe?

> @@ -0,0 +1,1214 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/* Copyright 2017 Microsemi Corporation
> + * Copyright 2018-2019 NXP Semiconductors
> + */
> +#include <soc/mscc/ocelot_qsys.h>
> +#include <soc/mscc/ocelot_vcap.h>
> +#include <soc/mscc/ocelot_ptp.h>
> +#include <soc/mscc/ocelot_sys.h>
> +#include <soc/mscc/ocelot.h>
> +#include <linux/spi/spi.h>
> +#include <linux/packing.h>
> +#include <linux/pcs-lynx.h>
> +#include <net/pkt_sched.h>
> +#include <linux/iopoll.h>
> +#include <linux/kconfig.h>
> +#include <linux/mdio.h>
> +#include "felix.h"

Not sure if all the includes are needed, please remove the ones that
aren't.

> +
> +#define VSC7512_TAS_GCL_ENTRY_MAX 63

VSC7512 to my knowledge does not have a TSN time-aware shaper, so you
can delete.

> +
> +// Note: These addresses and offsets are all shifted down
> +// by two. This is because the SPI protocol needs them to
> +// be before they get sent out.
> +//
> +// An alternative is to keep them standardized, but then
> +// a separate spi_bus regmap would need to be defined.
> +//
> +// That might be optimal though. The 'Read' protocol of
> +// the VSC driver might be much quicker if we add padding
> +// bytes, which I don't think regmap supports.
> +static const u32 vsc7512_ana_regmap[] = {
> + REG(ANA_ADVLEARN, 0x2400),
> + REG(ANA_VLANMASK, 0x2401),
> + REG_RESERVED(ANA_PORT_B_DOMAIN),
> + REG(ANA_ANAGEFIL, 0x2403),
> + REG(ANA_ANEVENTS, 0x2404),
> + REG(ANA_STORMLIMIT_BURST, 0x2405),
> + REG(ANA_STORMLIMIT_CFG, 0x2406),
> + REG(ANA_ISOLATED_PORTS, 0x240a),
> + REG(ANA_COMMUNITY_PORTS, 0x240b),
> + REG(ANA_AUTOAGE, 0x240c),
> + REG(ANA_MACTOPTIONS, 0x240d),
> + REG(ANA_LEARNDISC, 0x240e),
> + REG(ANA_AGENCTRL, 0x240f),
> + REG(ANA_MIRRORPORTS, 0x2410),
> + REG(ANA_EMIRRORPORTS, 0x2411),
> + REG(ANA_FLOODING, 0x2412),
> + REG(ANA_FLOODING_IPMC, 0x2413),
> + REG(ANA_SFLOW_CFG, 0x2414),
> + REG(ANA_PORT_MODE, 0x2420),
> + REG(ANA_PGID_PGID, 0x2300),
> + REG(ANA_TABLES_ANMOVED, 0x22cc),
> + REG(ANA_TABLES_MACHDATA, 0x22cd),
> + REG(ANA_TABLES_MACLDATA, 0x22ce),
> + REG(ANA_TABLES_MACACCESS, 0x22cf),
> + REG(ANA_TABLES_MACTINDX, 0x22d0),
> + REG(ANA_TABLES_VLANACCESS, 0x22d1),
> + REG(ANA_TABLES_VLANTIDX, 0x22d2),
> + REG(ANA_TABLES_ENTRYLIM, 0x22c0),
> + REG(ANA_TABLES_PTP_ID_HIGH, 0x22d5),
> + REG(ANA_TABLES_PTP_ID_LOW, 0x22d6),
> + REG(ANA_PORT_VLAN_CFG, 0x1c00),
> + REG(ANA_PORT_DROP_CFG, 0x1c01),
> + REG(ANA_PORT_QOS_CFG, 0x1c02),
> + REG(ANA_PORT_VCAP_CFG, 0x1c03),
> + REG(ANA_PORT_VCAP_S1_KEY_CFG, 0x1c04),
> + REG(ANA_PORT_VCAP_S2_CFG, 0x1c07),
> + REG(ANA_PORT_PCP_DEI_MAP, 0x1c08),
> + REG(ANA_PORT_CPU_FWD_CFG, 0x1c18),
> + REG(ANA_PORT_CPU_FWD_BPDU_CFG, 0x1c19),
> + REG(ANA_PORT_CPU_FWD_GARP_CFG, 0x1c1a),
> + REG(ANA_PORT_CPU_FWD_CCM_CFG, 0x1c1b),
> + REG(ANA_PORT_PORT_CFG, 0x1c1c),
> + REG(ANA_PORT_POL_CFG, 0x1c1d),
> + REG(ANA_PORT_PTP_CFG, 0x1c1e),
> + REG(ANA_PORT_PTP_DLY1_CFG, 0x1c1f),
> + REG(ANA_PORT_PTP_DLY2_CFG, 0x1c20),
> + REG(ANA_PFC_PFC_CFG, 0x2200),
> + REG_RESERVED(ANA_PFC_PFC_TIMER),
> + REG_RESERVED(ANA_IPT_OAM_MEP_CFG),
> + REG_RESERVED(ANA_IPT_IPT),
> + REG_RESERVED(ANA_PPT_PPT),
> + REG_RESERVED(ANA_FID_MAP_FID_MAP),
> + REG(ANA_AGGR_CFG, 0x242d),
> + REG(ANA_CPUQ_CFG, 0x242e),
> + REG_RESERVED(ANA_CPUQ_CFG2),
> + REG(ANA_CPUQ_8021_CFG, 0x242f),
> + REG(ANA_DSCP_CFG, 0x2440),
> + REG(ANA_DSCP_REWR_CFG, 0x2480),
> + REG(ANA_VCAP_RNG_TYPE_CFG, 0x2490),
> + REG(ANA_VCAP_RNG_VAL_CFG, 0x2498),
> + REG_RESERVED(ANA_VRAP_CFG),
> + REG_RESERVED(ANA_VRAP_HDR_DATA),
> + REG_RESERVED(ANA_VRAP_HDR_MASK),
> + REG(ANA_DISCARD_CFG, 0x24a3),
> + REG(ANA_FID_CFG, 0x24a4),
> + REG(ANA_POL_PIR_CFG, 0x1000),
> + REG(ANA_POL_CIR_CFG, 0x1001),
> + REG(ANA_POL_MODE_CFG, 0x1002),
> + REG(ANA_POL_PIR_STATE, 0x1003),
> + REG(ANA_POL_CIR_STATE, 0x1004),
> + REG_RESERVED(ANA_POL_STATE),
> + REG(ANA_POL_FLOWC, 0x22e0),
> + REG(ANA_POL_HYST, 0x22fb),
> + REG_RESERVED(ANA_POL_MISC_CFG),
> +};
> +
> +static const u32 vsc7512_qs_regmap[] = {
> + REG(QS_XTR_GRP_CFG, 0x0000),
> + REG(QS_XTR_RD, 0x0002),
> + REG(QS_XTR_FRM_PRUNING, 0x004),
> + REG(QS_XTR_FLUSH, 0x0006),
> + REG(QS_XTR_DATA_PRESENT, 0x0007),
> +
> + REG(QS_INJ_GRP_CFG, 0x0009),
> + REG(QS_INJ_WR, 0x000b),
> + REG(QS_INJ_CTRL, 0x000d),
> + REG(QS_INJ_STATUS, 0x000f),
> + REG(QS_INJ_ERR, 0x0010),
> + REG_RESERVED(QS_INH_DBG),
> +};
> +
> +static const u32 vsc7512_vcap_regmap[] = {
> + REG(VCAP_CORE_UPDATE_CTRL, 0x000000),
> + REG(VCAP_CORE_MV_CFG, 0x000001),
> + REG(VCAP_CACHE_ENTRY_DAT, 0x000002),
> + REG(VCAP_CACHE_MASK_DAT, 0x000042),
> + REG(VCAP_CACHE_ACTION_DAT, 0x000082),
> + REG(VCAP_CACHE_CNT_DAT, 0x0000c2),
> + REG(VCAP_CACHE_TG_DAT, 0x0000e2),
> + REG(VCAP_CONST_VCAP_VER, 0x0000e6),
> + REG(VCAP_CONST_ENTRY_WIDTH, 0x0000e7),
> + REG(VCAP_CONST_ENTRY_CNT, 0x0000e8),
> + REG(VCAP_CONST_ENTRY_SWCNT, 0x0000e9),
> + REG(VCAP_CONST_ENTRY_TG_WIDTH, 0x0000ea),
> + REG(VCAP_CONST_ACTION_DEF_CNT, 0x0000eb),
> + REG(VCAP_CONST_ACTION_WIDTH, 0x0000ec),
> + REG(VCAP_CONST_CNT_WIDTH, 0x0000ed),
> + REG(VCAP_CONST_CORE_CNT, 0x0000ee),
> + REG(VCAP_CONST_IF_CNT, 0x0000ef),
> +};
> +
> +static const u32 vsc7512_qsys_regmap[] = {
> + REG(QSYS_PORT_MODE, 0x4480),
> + REG(QSYS_SWITCH_PORT_MODE, 0x448d),
> + REG(QSYS_STAT_CNT_CFG, 0x4499),
> + REG(QSYS_EEE_CFG, 0x449a),
> + REG(QSYS_EEE_THRES, 0x44a5),
> + REG(QSYS_IGR_NO_SHARING, 0x44a6),
> + REG(QSYS_EGR_NO_SHARING, 0x44a7),
> + REG(QSYS_SW_STATUS, 0x44a8),
> + REG(QSYS_EXT_CPU_CFG, 0x44b4),
> + REG_RESERVED(QSYS_PAD_CFG),
> + REG(QSYS_CPU_GROUP_MAP, 0x44b6),
> + REG_RESERVED(QSYS_QMAP),
> + REG_RESERVED(QSYS_ISDX_SGRP),
> + REG_RESERVED(QSYS_TIMED_FRAME_ENTRY),
> + REG(QSYS_TFRM_MISC, 0x44c4),
> + REG(QSYS_TFRM_PORT_DLY, 0x44c5),
> + REG(QSYS_TFRM_TIMER_CFG_1, 0x44c6),
> + REG(QSYS_TFRM_TIMER_CFG_2, 0x44c7),
> + REG(QSYS_TFRM_TIMER_CFG_3, 0x44c8),
> + REG(QSYS_TFRM_TIMER_CFG_4, 0x44c9),
> + REG(QSYS_TFRM_TIMER_CFG_5, 0x44ca),
> + REG(QSYS_TFRM_TIMER_CFG_6, 0x44cb),
> + REG(QSYS_TFRM_TIMER_CFG_7, 0x44cc),
> + REG(QSYS_TFRM_TIMER_CFG_8, 0x44cd),
> + REG(QSYS_RED_PROFILE, 0x44ce),
> + REG(QSYS_RES_QOS_MODE, 0x44de),
> + REG(QSYS_RES_CFG, 0x4800),
> + REG(QSYS_RES_STAT, 0x4801),
> + REG(QSYS_EGR_DROP_MODE, 0x44df),
> + REG(QSYS_EQ_CTRL, 0x44e0),
> + REG_RESERVED(QSYS_EVENTS_CORE),
> + REG(QSYS_CIR_CFG, 0x0000),
> + REG(QSYS_EIR_CFG, 0x0001),
> + REG(QSYS_SE_CFG, 0x0002),
> + REG(QSYS_SE_DWRR_CFG, 0x0003),
> + REG_RESERVED(QSYS_SE_CONNECT),
> + REG(QSYS_SE_DLB_SENSE, 0x0010),
> + REG(QSYS_CIR_STATE, 0x0011),
> + REG(QSYS_EIR_STATE, 0x0012),
> + REG_RESERVED(QSYS_SE_STATE),
> + REG(QSYS_HSCH_MISC_CFG, 0x44e2),
> +};
> +
> +static const u32 vsc7512_rew_regmap[] = {
> + REG(REW_PORT_VLAN_CFG, 0x000),
> + REG(REW_TAG_CFG, 0x001),
> + REG(REW_PORT_CFG, 0x002),
> + REG(REW_DSCP_CFG, 0x003),
> + REG(REW_PCP_DEI_QOS_MAP_CFG, 0x004),
> + REG(REW_PTP_CFG, 0x014),
> + REG(REW_PTP_DLY1_CFG, 0x015),
> + REG(REW_RED_TAG_CFG, 0x016),
> + REG(REW_DSCP_REMAP_DP1_CFG, 0x104),
> + REG(REW_DSCP_REMAP_CFG, 0x144),
> + REG_RESERVED(REW_STAT_CFG),
> + REG_RESERVED(REW_REW_STICKY),
> + REG_RESERVED(REW_PPT),
> +};
> +
> +static const u32 vsc7512_sys_regmap[] = {
> + REG(SYS_COUNT_RX_OCTETS, 0x000),
> + REG(SYS_COUNT_RX_MULTICAST, 0x002),
> + REG(SYS_COUNT_RX_SHORTS, 0x004),
> + REG(SYS_COUNT_RX_FRAGMENTS, 0x005),
> + REG(SYS_COUNT_RX_JABBERS, 0x006),
> + REG(SYS_COUNT_RX_64, 0x009),
> + REG(SYS_COUNT_RX_65_127, 0x00a),
> + REG(SYS_COUNT_RX_128_255, 0x00b),
> + REG(SYS_COUNT_RX_256_1023, 0x00c),
> + REG(SYS_COUNT_RX_1024_1526, 0x00d),
> + REG(SYS_COUNT_RX_1527_MAX, 0x00e),
> + REG(SYS_COUNT_RX_LONGS, 0x011),
> + REG(SYS_COUNT_TX_OCTETS, 0x080),
> + REG(SYS_COUNT_TX_COLLISION, 0x084),
> + REG(SYS_COUNT_TX_DROPS, 0x085),
> + REG(SYS_COUNT_TX_64, 0x087),
> + REG(SYS_COUNT_TX_65_127, 0x088),
> + REG(SYS_COUNT_TX_128_511, 0x089),
> + REG(SYS_COUNT_TX_512_1023, 0x08a),
> + REG(SYS_COUNT_TX_1024_1526, 0x08b),
> + REG(SYS_COUNT_TX_1527_MAX, 0x08c),
> + REG(SYS_COUNT_TX_AGING, 0x09e),
> + REG(SYS_RESET_CFG, 0x142),
> + REG(SYS_VLAN_ETYPE_CFG, 0x144),
> + REG(SYS_PORT_MODE, 0x145),
> + REG(SYS_FRONT_PORT_MODE, 0x152),
> + REG(SYS_FRM_AGING, 0x15d),
> + REG(SYS_STAT_CFG, 0x15e),
> + REG_RESERVED(SYS_MISC_CFG),
> + REG(SYS_REW_MAC_HIGH_CFG, 0x16c),
> + REG(SYS_REW_MAC_LOW_CFG, 0x177),
> + REG(SYS_PAUSE_CFG, 0x182),
> + REG(SYS_PAUSE_TOT_CFG, 0x18e),
> + REG(SYS_ATOP, 0x18f),
> + REG(SYS_ATOP_TOT_CFG, 0x19b),
> + REG(SYS_MAC_FC_CFG, 0x19c),
> + REG(SYS_MMGT, 0x1a7),
> + REG_RESERVED(SYS_MMGT_FAST),
> + REG_RESERVED(SYS_EVENTS_DIF),
> + REG_RESERVED(SYS_EVENTS_CORE),
> + REG_RESERVED(SYS_CNT),
> + REG(SYS_PTP_STATUS, 0x1ae),
> + REG(SYS_PTP_TXSTAMP, 0x1af),
> + REG(SYS_PTP_NXT, 0x1b0),
> + REG(SYS_PTP_CFG, 0x1b1),
> + REG_RESERVED(SYS_CM_ADDR),
> + REG_RESERVED(SYS_CM_DATA_WR),
> + REG_RESERVED(SYS_CM_DATA_RD),
> + REG_RESERVED(SYS_CM_OP),
> + REG_RESERVED(SYS_CM_DATA),
> +};
> +
> +static const u32 vsc7512_ptp_regmap[] = {
> + REG(PTP_PIN_CFG, 0x000000),
> + REG(PTP_PIN_TOD_SEC_MSB, 0x000001),
> + REG(PTP_PIN_TOD_SEC_LSB, 0x000002),
> + REG(PTP_PIN_TOD_NSEC, 0x000003),
> + REG(PTP_PIN_WF_HIGH_PERIOD, 0x000005),
> + REG(PTP_PIN_WF_LOW_PERIOD, 0x000006),
> + REG(PTP_CFG_MISC, 0x000028),
> + REG(PTP_CLK_CFG_ADJ_CFG, 0x000029),
> + REG(PTP_CLK_CFG_ADJ_FREQ, 0x00002a),
> +};
> +
> +static const u32 vsc7512_gcb_regmap[] = {
> + REG(GCB_SOFT_RST, 0xc002),
> +};
> +
> +static const u32 vsc7512_dev_gmii_regmap[] = {
> + REG(DEV_CLOCK_CFG, 0x0),
> + REG(DEV_PORT_MISC, 0x1),
> + REG(DEV_EEE_CFG, 0x3),
> + REG(DEV_RX_PATH_DELAY, 0x4),
> + REG(DEV_TX_PATH_DELAY, 0x5),
> + REG(DEV_PTP_PREDICT_CFG, 0x6),
> + REG(DEV_MAC_ENA_CFG, 0x7),
> + REG(DEV_MAC_MODE_CFG, 0x8),
> + REG(DEV_MAC_MAXLEN_CFG, 0x9),
> + REG(DEV_MAC_TAGS_CFG, 0xa),
> + REG(DEV_MAC_ADV_CHK_CFG, 0xb),
> + REG(DEV_MAC_IFG_CFG, 0xc),
> + REG(DEV_MAC_HDX_CFG, 0xd),
> + REG(DEV_MAC_DBG_CFG, 0xe),
> + REG(DEV_MAC_FC_MAC_LOW_CFG, 0xf),
> + REG(DEV_MAC_FC_MAC_HIGH_CFG, 0x10),
> + REG(DEV_MAC_STICKY, 0x11),
> + REG_RESERVED(PCS1G_CFG),
> + REG_RESERVED(PCS1G_MODE_CFG),
> + REG_RESERVED(PCS1G_SD_CFG),
> + REG_RESERVED(PCS1G_ANEG_CFG),
> + REG_RESERVED(PCS1G_ANEG_NP_CFG),
> + REG_RESERVED(PCS1G_LB_CFG),
> + REG_RESERVED(PCS1G_DBG_CFG),
> + REG_RESERVED(PCS1G_CDET_CFG),
> + REG_RESERVED(PCS1G_ANEG_STATUS),
> + REG_RESERVED(PCS1G_ANEG_NP_STATUS),
> + REG_RESERVED(PCS1G_LINK_STATUS),
> + REG_RESERVED(PCS1G_LINK_DOWN_CNT),
> + REG_RESERVED(PCS1G_STICKY),
> + REG_RESERVED(PCS1G_DEBUG_STATUS),
> + REG_RESERVED(PCS1G_LPI_CFG),
> + REG_RESERVED(PCS1G_LPI_WAKE_ERROR_CNT),
> + REG_RESERVED(PCS1G_LPI_STATUS),
> + REG_RESERVED(PCS1G_TSTPAT_MODE_CFG),
> + REG_RESERVED(PCS1G_TSTPAT_STATUS),
> + REG_RESERVED(DEV_PCS_FX100_CFG),
> + REG_RESERVED(DEV_PCS_FX100_STATUS),
> +};
> +
> +static const u32 vsc7512_cpu_org_regmap[] = {
> + REG(DEV_CPUORG_IF_CTRL, 0x0000),
> + REG(DEV_CPUORG_IF_CFGSTAT, 0x0001),
> + REG(DEV_CPUORG_ORG_CFG, 0x0002),
> + REG(DEV_CPUORG_ERR_CNTS, 0x0003),
> + REG(DEV_CPUORG_TIMEOUT_CFG, 0x0004),
> + REG(DEV_CPUORG_GPR, 0x0005),
> + REG(DEV_CPUORG_MAILBOX_SET, 0x0006),
> + REG(DEV_CPUORG_MAILBOX_CLR, 0x0007),
> + REG(DEV_CPUORG_MAILBOX, 0x0008),
> + REG(DEV_CPUORG_SEMA_CFG, 0x0009),
> + REG(DEV_CPUORG_SEMA0, 0x000a),
> + REG(DEV_CPUORG_SEMA0_OWNER, 0x000b),
> + REG(DEV_CPUORG_SEMA1, 0x000c),
> + REG(DEV_CPUORG_SEMA1_OWNER, 0x000d),
> +};

I know I changed my mind, but if the regmap is the same as for
drivers/net/ethernet/mscc/ocelot_vsc7514.c, just divided by 4, then it
makes a lot more sense to implement the custom regmap accessors and
reuse the regmaps from there.

> +static const u32 *vsc7512_regmap[TARGET_MAX] = {
> + [ANA] = vsc7512_ana_regmap,
> + [QS] = vsc7512_qs_regmap,
> + [QSYS] = vsc7512_qsys_regmap,
> + [REW] = vsc7512_rew_regmap,
> + [SYS] = vsc7512_sys_regmap,
> + [S0] = vsc7512_vcap_regmap,
> + [S1] = vsc7512_vcap_regmap,
> + [S2] = vsc7512_vcap_regmap,
> + [PTP] = vsc7512_ptp_regmap,
> + [GCB] = vsc7512_gcb_regmap,
> + [DEV_GMII] = vsc7512_dev_gmii_regmap,
> + [DEV_CPUORG] = vsc7512_cpu_org_regmap,
> +};
> +
> +static int vsc7512_soft_rst_status(struct ocelot *ocelot)
> +{
> + int val;
> +
> + ocelot_field_read(ocelot, GCB_SOFT_RST_SWC_RST, &val);
> +
> + return val;
> +}
> +
> +#define VSC7512_INIT_TIMEOUT 50000
> +#define VSC7512_GCB_RST_SLEEP 100
> +
> +static int vsc7512_reset(struct ocelot *ocelot)
> +{
> + int val, err;
> +
> + ocelot_field_write(ocelot, GCB_SOFT_RST_SWC_RST, 1);
> +
> + err = readx_poll_timeout(vsc7512_soft_rst_status, ocelot, val, !val,
> + VSC7512_GCB_RST_SLEEP, VSC7512_INIT_TIMEOUT);
> + if (err) {
> + dev_err(ocelot->dev, "timeout: switch core reset\n");
> + return err;
> + }
> +
> + return 0;
> +}

I'm surprised that the reset procedure for VSC7512 is different than
what is implemented in ocelot_reset() for VSC7514.

> +static u16 vsc7512_wm_enc(u16 value)
> +{
> + WARN_ON(value >= 16 * BIT(8));
> +
> + if (value >= BIT(8))
> + return BIT(8) | (value / 16);
> +
> + return value;
> +}

Don't duplicate, just EXPORT_SYMBOL(ocelot_wm_enc) and call here.

> +static const struct ocelot_ops vsc7512_ops = {
> + .reset = vsc7512_reset,
> + .wm_enc = vsc7512_wm_enc,

You must be working on an old kernel or something. There's also a
watermark decode function which you can reuse from ocelot (ocelot_wm_dec).

> + .port_to_netdev = felix_port_to_netdev,
> + .netdev_to_port = felix_netdev_to_port,
> +};
> +
> +/* Addresses are relative to the SPI device's base address, downshifted by 2*/
> +static const struct resource vsc7512_target_io_res[TARGET_MAX] = {
> + [ANA] = {
> + .start = 0x1c620000,
> + .end = 0x1c623fff,
> + .name = "ana",
> + },
> + [QS] = {
> + .start = 0x1c420000,
> + .end = 0x1c42003f,
> + .name = "qs",
> + },
> + [QSYS] = {
> + .start = 0x1c600000,
> + .end = 0x1c607fff,
> + .name = "qsys",
> + },
> + [REW] = {
> + .start = 0x1c40c000,
> + .end = 0x1c40ffff,
> + .name = "rew",
> + },
> + [SYS] = {
> + .start = 0x1c404000,
> + .end = 0x1c407fff,
> + .name = "sys",
> + },
> + [S0] = {
> + .start = 0x1c410000,
> + .end = 0x1c4100ff,
> + .name = "s0",
> + },
> + [S1] = {
> + .start = 0x1c414000,
> + .end = 0x1c4140ff,
> + .name = "s1",
> + },
> + [S2] = {
> + .start = 0x1c418000,
> + .end = 0x1c4180ff,
> + .name = "s2",
> + },
> + [GCB] = {
> + .start = 0x1c41c000,
> + .end = 0x1c41c07f,
> + .name = "devcpu_gcb",
> + },
> + [DEV_CPUORG] = {
> + .start = 0x1c400000,
> + .end = 0x1c4000ff,
> + .name = "devcpu_org",
> + },
> +};
> +
> +static const struct resource vsc7512_port_io_res[] = {
> + {
> + .start = 0x1c478000,
> + .end = 0x1c47bfff,
> + .name = "port0",
> + },
> + {
> + .start = 0x1c47c000,
> + .end = 0x1c47ffff,
> + .name = "port1",
> + },
> + {
> + .start = 0x1c480000,
> + .end = 0x1c483fff,
> + .name = "port2",
> + },
> + {
> + .start = 0x1c484000,
> + .end = 0x1c487fff,
> + .name = "port3",
> + },
> + {
> + .start = 0x1c488000,
> + .end = 0x1c48bfff,
> + .name = "port4",
> + },
> + {
> + .start = 0x1c48c000,
> + .end = 0x1c48ffff,
> + .name = "port5",
> + },
> +};
> +
> +static const struct reg_field vsc7512_regfields[REGFIELD_MAX] = {
> + [ANA_ADVLEARN_VLAN_CHK] = REG_FIELD(ANA_ADVLEARN, 11, 11),
> + [ANA_ADVLEARN_LEARN_MIRROR] = REG_FIELD(ANA_ADVLEARN, 0, 10),
> + [ANA_ANEVENTS_MSTI_DROP] = REG_FIELD(ANA_ANEVENTS, 27, 27),
> + [ANA_ANEVENTS_ACLKILL] = REG_FIELD(ANA_ANEVENTS, 26, 26),
> + [ANA_ANEVENTS_ACLUSED] = REG_FIELD(ANA_ANEVENTS, 25, 25),
> + [ANA_ANEVENTS_AUTOAGE] = REG_FIELD(ANA_ANEVENTS, 24, 24),
> + [ANA_ANEVENTS_VS2TTL1] = REG_FIELD(ANA_ANEVENTS, 23, 23),
> + [ANA_ANEVENTS_STORM_DROP] = REG_FIELD(ANA_ANEVENTS, 22, 22),
> + [ANA_ANEVENTS_LEARN_DROP] = REG_FIELD(ANA_ANEVENTS, 21, 21),
> + [ANA_ANEVENTS_AGED_ENTRY] = REG_FIELD(ANA_ANEVENTS, 20, 20),
> + [ANA_ANEVENTS_CPU_LEARN_FAILED] = REG_FIELD(ANA_ANEVENTS, 19, 19),
> + [ANA_ANEVENTS_AUTO_LEARN_FAILED] = REG_FIELD(ANA_ANEVENTS, 18, 18),
> + [ANA_ANEVENTS_LEARN_REMOVE] = REG_FIELD(ANA_ANEVENTS, 17, 17),
> + [ANA_ANEVENTS_AUTO_LEARNED] = REG_FIELD(ANA_ANEVENTS, 16, 16),
> + [ANA_ANEVENTS_AUTO_MOVED] = REG_FIELD(ANA_ANEVENTS, 15, 15),
> + [ANA_ANEVENTS_DROPPED] = REG_FIELD(ANA_ANEVENTS, 14, 14),
> + [ANA_ANEVENTS_CLASSIFIED_DROP] = REG_FIELD(ANA_ANEVENTS, 13, 13),
> + [ANA_ANEVENTS_CLASSIFIED_COPY] = REG_FIELD(ANA_ANEVENTS, 12, 12),
> + [ANA_ANEVENTS_VLAN_DISCARD] = REG_FIELD(ANA_ANEVENTS, 11, 11),
> + [ANA_ANEVENTS_FWD_DISCARD] = REG_FIELD(ANA_ANEVENTS, 10, 10),
> + [ANA_ANEVENTS_MULTICAST_FLOOD] = REG_FIELD(ANA_ANEVENTS, 9, 9),
> + [ANA_ANEVENTS_UNICAST_FLOOD] = REG_FIELD(ANA_ANEVENTS, 8, 8),
> + [ANA_ANEVENTS_DEST_KNOWN] = REG_FIELD(ANA_ANEVENTS, 7, 7),
> + [ANA_ANEVENTS_BUCKET3_MATCH] = REG_FIELD(ANA_ANEVENTS, 6, 6),
> + [ANA_ANEVENTS_BUCKET2_MATCH] = REG_FIELD(ANA_ANEVENTS, 5, 5),
> + [ANA_ANEVENTS_BUCKET1_MATCH] = REG_FIELD(ANA_ANEVENTS, 4, 4),
> + [ANA_ANEVENTS_BUCKET0_MATCH] = REG_FIELD(ANA_ANEVENTS, 3, 3),
> + [ANA_ANEVENTS_CPU_OPERATION] = REG_FIELD(ANA_ANEVENTS, 2, 2),
> + [ANA_ANEVENTS_DMAC_LOOKUP] = REG_FIELD(ANA_ANEVENTS, 1, 1),
> + [ANA_ANEVENTS_SMAC_LOOKUP] = REG_FIELD(ANA_ANEVENTS, 0, 0),
> + [ANA_TABLES_MACACCESS_B_DOM] = REG_FIELD(ANA_TABLES_MACACCESS, 18, 18),
> + [ANA_TABLES_MACTINDX_BUCKET] = REG_FIELD(ANA_TABLES_MACTINDX, 10, 11),
> + [ANA_TABLES_MACTINDX_M_INDEX] = REG_FIELD(ANA_TABLES_MACTINDX, 0, 9),
> + [GCB_SOFT_RST_SWC_RST] = REG_FIELD(GCB_SOFT_RST, 0, 0),
> + [QSYS_TIMED_FRAME_ENTRY_TFRM_VLD] = REG_FIELD(QSYS_TIMED_FRAME_ENTRY, 20, 20),
> + [QSYS_TIMED_FRAME_ENTRY_TFRM_FP] = REG_FIELD(QSYS_TIMED_FRAME_ENTRY, 8, 19),
> + [QSYS_TIMED_FRAME_ENTRY_TFRM_PORTNO] = REG_FIELD(QSYS_TIMED_FRAME_ENTRY, 4, 7),
> + [QSYS_TIMED_FRAME_ENTRY_TFRM_TM_SEL] = REG_FIELD(QSYS_TIMED_FRAME_ENTRY, 1, 3),
> + [QSYS_TIMED_FRAME_ENTRY_TFRM_TM_T] = REG_FIELD(QSYS_TIMED_FRAME_ENTRY, 0, 0),
> + [SYS_RESET_CFG_CORE_ENA] = REG_FIELD(SYS_RESET_CFG, 2, 2),
> + [SYS_RESET_CFG_MEM_ENA] = REG_FIELD(SYS_RESET_CFG, 1, 1),
> + [SYS_RESET_CFG_MEM_INIT] = REG_FIELD(SYS_RESET_CFG, 0, 0),
> + /* Replicated per number of ports (12), register size 4 per port */
> + [QSYS_SWITCH_PORT_MODE_PORT_ENA] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 14, 14, 12, 4),
> + [QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 11, 13, 12, 4),
> + [QSYS_SWITCH_PORT_MODE_YEL_RSRVD] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 10, 10, 12, 4),
> + [QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 9, 9, 12, 4),
> + [QSYS_SWITCH_PORT_MODE_TX_PFC_ENA] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 1, 8, 12, 4),
> + [QSYS_SWITCH_PORT_MODE_TX_PFC_MODE] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 0, 0, 12, 4),
> + [SYS_PORT_MODE_DATA_WO_TS] = REG_FIELD_ID(SYS_PORT_MODE, 5, 6, 12, 4),
> + [SYS_PORT_MODE_INCL_INJ_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 3, 4, 12, 4),
> + [SYS_PORT_MODE_INCL_XTR_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 1, 2, 12, 4),
> + [SYS_PORT_MODE_INCL_HDR_ERR] = REG_FIELD_ID(SYS_PORT_MODE, 0, 0, 12, 4),
> + [SYS_PAUSE_CFG_PAUSE_START] = REG_FIELD_ID(SYS_PAUSE_CFG, 10, 18, 12, 4),
> + [SYS_PAUSE_CFG_PAUSE_STOP] = REG_FIELD_ID(SYS_PAUSE_CFG, 1, 9, 12, 4),
> + [SYS_PAUSE_CFG_PAUSE_ENA] = REG_FIELD_ID(SYS_PAUSE_CFG, 0, 1, 12, 4),
> +};
> +
> +static const struct ocelot_stat_layout vsc7512_stats_layout[] = {
> + { .offset = 0x00, .name = "rx_octets", },
> + { .offset = 0x01, .name = "rx_unicast", },
> + { .offset = 0x02, .name = "rx_multicast", },
> + { .offset = 0x03, .name = "rx_broadcast", },
> + { .offset = 0x04, .name = "rx_shorts", },
> + { .offset = 0x05, .name = "rx_fragments", },
> + { .offset = 0x06, .name = "rx_jabbers", },
> + { .offset = 0x07, .name = "rx_crc_align_errs", },
> + { .offset = 0x08, .name = "rx_sym_errs", },
> + { .offset = 0x09, .name = "rx_frames_below_65_octets", },
> + { .offset = 0x0A, .name = "rx_frames_65_to_127_octets", },
> + { .offset = 0x0B, .name = "rx_frames_128_to_255_octets", },
> + { .offset = 0x0C, .name = "rx_frames_256_to_511_octets", },
> + { .offset = 0x0D, .name = "rx_frames_512_to_1023_octets", },
> + { .offset = 0x0E, .name = "rx_frames_1024_to_1526_octets", },
> + { .offset = 0x0F, .name = "rx_frames_over_1526_octets", },
> + { .offset = 0x10, .name = "rx_pause", },
> + { .offset = 0x11, .name = "rx_control", },
> + { .offset = 0x12, .name = "rx_longs", },
> + { .offset = 0x13, .name = "rx_classified_drops", },
> + { .offset = 0x14, .name = "rx_red_prio_0", },
> + { .offset = 0x15, .name = "rx_red_prio_1", },
> + { .offset = 0x16, .name = "rx_red_prio_2", },
> + { .offset = 0x17, .name = "rx_red_prio_3", },
> + { .offset = 0x18, .name = "rx_red_prio_4", },
> + { .offset = 0x19, .name = "rx_red_prio_5", },
> + { .offset = 0x1A, .name = "rx_red_prio_6", },
> + { .offset = 0x1B, .name = "rx_red_prio_7", },
> + { .offset = 0x1C, .name = "rx_yellow_prio_0", },
> + { .offset = 0x1D, .name = "rx_yellow_prio_1", },
> + { .offset = 0x1E, .name = "rx_yellow_prio_2", },
> + { .offset = 0x1F, .name = "rx_yellow_prio_3", },
> + { .offset = 0x20, .name = "rx_yellow_prio_4", },
> + { .offset = 0x21, .name = "rx_yellow_prio_5", },
> + { .offset = 0x22, .name = "rx_yellow_prio_6", },
> + { .offset = 0x23, .name = "rx_yellow_prio_7", },
> + { .offset = 0x24, .name = "rx_green_prio_0", },
> + { .offset = 0x25, .name = "rx_green_prio_1", },
> + { .offset = 0x26, .name = "rx_green_prio_2", },
> + { .offset = 0x27, .name = "rx_green_prio_3", },
> + { .offset = 0x28, .name = "rx_green_prio_4", },
> + { .offset = 0x29, .name = "rx_green_prio_5", },
> + { .offset = 0x2A, .name = "rx_green_prio_6", },
> + { .offset = 0x2B, .name = "rx_green_prio_7", },
> + { .offset = 0x40, .name = "tx_octets", },
> + { .offset = 0x41, .name = "tx_unicast", },
> + { .offset = 0x42, .name = "tx_multicast", },
> + { .offset = 0x43, .name = "tx_broadcast", },
> + { .offset = 0x44, .name = "tx_collision", },
> + { .offset = 0x45, .name = "tx_drops", },
> + { .offset = 0x46, .name = "tx_pause", },
> + { .offset = 0x47, .name = "tx_frames_below_65_octets", },
> + { .offset = 0x48, .name = "tx_frames_65_to_127_octets", },
> + { .offset = 0x49, .name = "tx_frames_128_255_octets", },
> + { .offset = 0x4A, .name = "tx_frames_256_511_octets", },
> + { .offset = 0x4B, .name = "tx_frames_512_1023_octets", },
> + { .offset = 0x4C, .name = "tx_frames_1024_1526_octets", },
> + { .offset = 0x4D, .name = "tx_frames_over_1526_octets", },
> + { .offset = 0x4E, .name = "tx_yellow_prio_0", },
> + { .offset = 0x4F, .name = "tx_yellow_prio_1", },
> + { .offset = 0x50, .name = "tx_yellow_prio_2", },
> + { .offset = 0x51, .name = "tx_yellow_prio_3", },
> + { .offset = 0x52, .name = "tx_yellow_prio_4", },
> + { .offset = 0x53, .name = "tx_yellow_prio_5", },
> + { .offset = 0x54, .name = "tx_yellow_prio_6", },
> + { .offset = 0x55, .name = "tx_yellow_prio_7", },
> + { .offset = 0x56, .name = "tx_green_prio_0", },
> + { .offset = 0x57, .name = "tx_green_prio_1", },
> + { .offset = 0x58, .name = "tx_green_prio_2", },
> + { .offset = 0x59, .name = "tx_green_prio_3", },
> + { .offset = 0x5A, .name = "tx_green_prio_4", },
> + { .offset = 0x5B, .name = "tx_green_prio_5", },
> + { .offset = 0x5C, .name = "tx_green_prio_6", },
> + { .offset = 0x5D, .name = "tx_green_prio_7", },
> + { .offset = 0x5E, .name = "tx_aged", },
> + { .offset = 0x80, .name = "drop_local", },
> + { .offset = 0x81, .name = "drop_tail", },
> + { .offset = 0x82, .name = "drop_yellow_prio_0", },
> + { .offset = 0x83, .name = "drop_yellow_prio_1", },
> + { .offset = 0x84, .name = "drop_yellow_prio_2", },
> + { .offset = 0x85, .name = "drop_yellow_prio_3", },
> + { .offset = 0x86, .name = "drop_yellow_prio_4", },
> + { .offset = 0x87, .name = "drop_yellow_prio_5", },
> + { .offset = 0x88, .name = "drop_yellow_prio_6", },
> + { .offset = 0x89, .name = "drop_yellow_prio_7", },
> + { .offset = 0x8A, .name = "drop_green_prio_0", },
> + { .offset = 0x8B, .name = "drop_green_prio_1", },
> + { .offset = 0x8C, .name = "drop_green_prio_2", },
> + { .offset = 0x8D, .name = "drop_green_prio_3", },
> + { .offset = 0x8E, .name = "drop_green_prio_4", },
> + { .offset = 0x8F, .name = "drop_green_prio_5", },
> + { .offset = 0x90, .name = "drop_green_prio_6", },
> + { .offset = 0x91, .name = "drop_green_prio_7", },
> +};
> +
> +struct felix_spi_data {
> + struct regmap *map;
> + struct felix felix;
> +};
> +
> +/* TODO: The regmap has overlaps for DEVCPU_ORG and other peripherals. I believe
> + * this is handled with a page register, and should hopefully be easy to use
> + * with the existing regmap_config with regmap_range_cfg
> + */

Rule of thumb: if you don't need a new regmap (in this case DEVCPU_ORG)
and you're not even sure about how to access it, then just don't add it
(at least not now).

> +static const struct regmap_config felix_spi_regmap_config = {
> + .reg_bits = 24,
> + .reg_stride = 1,
> + .val_bits = 32,
> +
> + .write_flag_mask = BIT(7),
> + .max_register = 0x3fffffff,
> + .use_single_write = true,
> + .use_single_read = true,
> + .can_multi_write = false,
> +
> + .reg_format_endian = REGMAP_ENDIAN_BIG,
> + .val_format_endian = REGMAP_ENDIAN_NATIVE,
> +};
> +
> +#define VSC7512_BYTE_ORDER_LE 0x00000000
> +#define VSC7512_BYTE_ORDER_BE 0x81818181
> +#define VSC7512_BIT_ORDER_MSB 0x00000000
> +#define VSC7512_BIT_ORDER_LSB 0x42424242
> +
> +static int felix_spi_init_bus(struct spi_device *spi,
> + struct felix_spi_data *felix_spi)
> +{
> + int err;
> + u32 val, check;
> +
> + val = 0;
> +
> +#ifdef __LITTLE_ENDIAN
> + val |= VSC7512_BYTE_ORDER_LE;
> +#else
> + val |= VSC7512_BYTE_ORDER_BE;
> +#endif
> +
> + // Hard code this write to set up the interface. After this is done,
> + // ocelot_read interface should be able to be used.
> + err = regmap_write(felix_spi->map, (0x71000000 >> 2) & 0x3fffff, val);
> + if (err < 0) {
> + dev_err(&spi->dev, "error %d configuring SPI interface\n", err);
> + return err;
> + }
> +
> + val = 0x00000000;
> + err = regmap_write(felix_spi->map, (0x71000004 >> 2) & 0x3fffff, val);

I think the last parameter of regmap_write doesn't have to be a
variable, it can be a constant (zero in this case), so you can remove
"val = 0" and just pass 0 as last argument.

> + if (err < 0) {
> + dev_err(&spi->dev, "error %d writing padding bytes\n", err);
> + return err;
> + }
> +
> + check = val | 0x02000000;

val is always zero here, no? so "check" is always 0x02000000. It's also
pretty constant, no need to keep it in a variable.

> +
> + err = regmap_read(felix_spi->map, (0x71000004 >> 2) & 0x3fffff, &val);
> + if (err < 0) {
> + dev_err(&spi->dev, "Error %d writing padding bytes\n", err);
> + return err;
> + } else if (check != val) {
> + dev_err(&spi->dev,
> + "Error configuring SPI bus. V: 0x%08x != 0x%08x\n", val,
> + check);
> + return -ENODEV;
> + }

Care to explain what you are accessing? Why are you AND-ing the address
with 0x3fffffff? Whose address is it anyway?

> +
> + return err;
> +}
> +
> +static void vsc7512_phylink_validate(struct ocelot *ocelot, int port,
> + unsigned long *supported,
> + struct phylink_link_state *state)
> +{
> + struct ocelot_port *ocelot_port = ocelot->ports[port];
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = {
> + 0,
> + };
> +
> + if (state->interface != PHY_INTERFACE_MODE_NA &&
> + state->interface != ocelot_port->phy_mode) {
> + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
> + return;
> + }
> +
> + phylink_set_port_modes(mask);
> + phylink_set(mask, Autoneg);
> + phylink_set(mask, Pause);
> + phylink_set(mask, Asym_Pause);
> + phylink_set(mask, 10baseT_Half);
> + phylink_set(mask, 10baseT_Full);
> + phylink_set(mask, 100baseT_Half);
> + phylink_set(mask, 100baseT_Full);
> + phylink_set(mask, 1000baseT_Half);
> + phylink_set(mask, 1000baseT_Full);
> +
> + if (state->interface == PHY_INTERFACE_MODE_INTERNAL ||
> + state->interface == PHY_INTERFACE_MODE_INTERNAL ||
> + state->interface == PHY_INTERFACE_MODE_INTERNAL) {
> + phylink_set(mask, 2500baseT_Full);
> + phylink_set(mask, 2500baseX_Full);
> + }
> +
> + bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
> + bitmap_and(state->advertising, state->advertising, mask,
> + __ETHTOOL_LINK_MODE_MASK_NBITS);
> +}
> +
> +static int vsc7512_prevalidate_phy_mode(struct ocelot *ocelot, int port,
> + phy_interface_t phy_mode)
> +{
> + switch (phy_mode) {
> + case PHY_INTERFACE_MODE_INTERNAL:
> + // TODO: I don't know what ports would not be supported
> + // internally.
> + return 0;

PHY_INTERFACE_MODE_INTERNAL means that the MAC is not wired to pinout on
the SoC, but connected to an internal PHY or to another on-chip MAC.
I don't really understand the comment.

> + case PHY_INTERFACE_MODE_SGMII:
> + case PHY_INTERFACE_MODE_QSGMII:
> + case PHY_INTERFACE_MODE_USXGMII:

Sure it supports USXGMII? I think one of the reasons NXP integrated
their own PCS on the parts with a licensed Microchip switch was to get
USXGMII support.

> + case PHY_INTERFACE_MODE_2500BASEX:
> + if (port == 4 || port == 5)
> + return -EOPNOTSUPP;

Is this copy-paste or is it correct?

> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int vsc7512_port_setup_tc(struct dsa_switch *ds, int port,
> + enum tc_setup_type type, void *type_data)
> +{
> + return -EOPNOTSUPP;
> +}
> +
> +static void vsc7512_sched_speed_set(struct ocelot *ocelot, int port, u32 speed)
> +{
> + u8 tas_speed;
> +
> + switch (speed) {
> + case SPEED_10:
> + tas_speed = OCELOT_SPEED_10;
> + break;
> +
> + case SPEED_100:
> + tas_speed = OCELOT_SPEED_100;
> + break;
> +
> + case SPEED_1000:
> + tas_speed = OCELOT_SPEED_1000;
> + break;
> +
> + case SPEED_2500:
> + tas_speed = OCELOT_SPEED_2500;
> + break;
> +
> + default:
> + tas_speed = OCELOT_SPEED_1000;
> + break;
> + }
> +
> + ocelot_rmw_rix(ocelot, QSYS_TAG_CONFIG_LINK_SPEED(tas_speed),
> + QSYS_TAG_CONFIG_LINK_SPEED_M, QSYS_TAG_CONFIG, port);
> +}

If vsc7512_port_setup_tc returns -EOPNOTSUPP (i.e. it doesn't offload
tc-taprio) then vsc7512_sched_speed_set is pointless.

Also, VSC7512 has TSN?

> +
> +static const struct vcap_field vsc7512_vcap_es0_keys[] = {
> + [VCAP_ES0_EGR_PORT] = { 0, 4 },
> + [VCAP_ES0_IGR_PORT] = { 4, 4 },
> + [VCAP_ES0_RSV] = { 8, 2 },
> + [VCAP_ES0_L2_MC] = { 10, 1 },
> + [VCAP_ES0_L2_BC] = { 11, 1 },
> + [VCAP_ES0_VID] = { 12, 12 },
> + [VCAP_ES0_DP] = { 24, 1 },
> + [VCAP_ES0_PCP] = { 25, 3 },
> +};

Align with tabs please, to be consistent.

> +
> +static const struct vcap_field vsc7512_vcap_es0_actions[] = {
> + [VCAP_ES0_ACT_PUSH_OUTER_TAG] = { 0, 2 },
> + [VCAP_ES0_ACT_PUSH_INNER_TAG] = { 2, 1 },
> + [VCAP_ES0_ACT_TAG_A_TPID_SEL] = { 3, 2 },
> + [VCAP_ES0_ACT_TAG_A_VID_SEL] = { 5, 1 },
> + [VCAP_ES0_ACT_TAG_A_PCP_SEL] = { 6, 2 },
> + [VCAP_ES0_ACT_TAG_A_DEI_SEL] = { 8, 2 },
> + [VCAP_ES0_ACT_TAG_B_TPID_SEL] = { 10, 2 },
> + [VCAP_ES0_ACT_TAG_B_VID_SEL] = { 12, 1 },
> + [VCAP_ES0_ACT_TAG_B_PCP_SEL] = { 13, 2 },
> + [VCAP_ES0_ACT_TAG_B_DEI_SEL] = { 15, 2 },
> + [VCAP_ES0_ACT_VID_A_VAL] = { 17, 12 },
> + [VCAP_ES0_ACT_PCP_A_VAL] = { 29, 3 },
> + [VCAP_ES0_ACT_DEI_A_VAL] = { 32, 1 },
> + [VCAP_ES0_ACT_VID_B_VAL] = { 33, 12 },
> + [VCAP_ES0_ACT_PCP_B_VAL] = { 45, 3 },
> + [VCAP_ES0_ACT_DEI_B_VAL] = { 48, 1 },
> + [VCAP_ES0_ACT_RSV] = { 49, 24 },
> + [VCAP_ES0_ACT_HIT_STICKY] = { 73, 1 },
> +};
> +
> +static const struct vcap_field vsc7512_vcap_is1_keys[] = {
> + [VCAP_IS1_HK_TYPE] = { 0, 1 },
> + [VCAP_IS1_HK_LOOKUP] = { 1, 2 },
> + [VCAP_IS1_HK_IGR_PORT_MASK] = { 3, 12 },
> + [VCAP_IS1_HK_RSV] = { 15, 9 },
> + [VCAP_IS1_HK_OAM_Y1731] = { 24, 1 },
> + [VCAP_IS1_HK_L2_MC] = { 25, 1 },
> + [VCAP_IS1_HK_L2_BC] = { 26, 1 },
> + [VCAP_IS1_HK_IP_MC] = { 27, 1 },
> + [VCAP_IS1_HK_VLAN_TAGGED] = { 28, 1 },
> + [VCAP_IS1_HK_VLAN_DBL_TAGGED] = { 29, 1 },
> + [VCAP_IS1_HK_TPID] = { 30, 1 },
> + [VCAP_IS1_HK_VID] = { 31, 12 },
> + [VCAP_IS1_HK_DEI] = { 43, 1 },
> + [VCAP_IS1_HK_PCP] = { 44, 3 },
> + /* Specific Fields for IS1 Half Key S1_NORMAL */
> + [VCAP_IS1_HK_L2_SMAC] = { 47, 48 },
> + [VCAP_IS1_HK_ETYPE_LEN] = { 95, 1 },
> + [VCAP_IS1_HK_ETYPE] = { 96, 16 },
> + [VCAP_IS1_HK_IP_SNAP] = { 112, 1 },
> + [VCAP_IS1_HK_IP4] = { 113, 1 },
> + /* Layer-3 Information */
> + [VCAP_IS1_HK_L3_FRAGMENT] = { 114, 1 },
> + [VCAP_IS1_HK_L3_FRAG_OFS_GT0] = { 115, 1 },
> + [VCAP_IS1_HK_L3_OPTIONS] = { 116, 1 },
> + [VCAP_IS1_HK_L3_DSCP] = { 117, 6 },
> + [VCAP_IS1_HK_L3_IP4_SIP] = { 123, 32 },
> + /* Layer-4 Information */
> + [VCAP_IS1_HK_TCP_UDP] = { 155, 1 },
> + [VCAP_IS1_HK_TCP] = { 156, 1 },
> + [VCAP_IS1_HK_L4_SPORT] = { 157, 16 },
> + [VCAP_IS1_HK_L4_RNG] = { 173, 8 },
> + /* Specific Fields for IS1 Half Key S1_5TUPLE_IP4 */
> + [VCAP_IS1_HK_IP4_INNER_TPID] = { 47, 1 },
> + [VCAP_IS1_HK_IP4_INNER_VID] = { 48, 12 },
> + [VCAP_IS1_HK_IP4_INNER_DEI] = { 60, 1 },
> + [VCAP_IS1_HK_IP4_INNER_PCP] = { 61, 3 },
> + [VCAP_IS1_HK_IP4_IP4] = { 64, 1 },
> + [VCAP_IS1_HK_IP4_L3_FRAGMENT] = { 65, 1 },
> + [VCAP_IS1_HK_IP4_L3_FRAG_OFS_GT0] = { 66, 1 },
> + [VCAP_IS1_HK_IP4_L3_OPTIONS] = { 67, 1 },
> + [VCAP_IS1_HK_IP4_L3_DSCP] = { 68, 6 },
> + [VCAP_IS1_HK_IP4_L3_IP4_DIP] = { 74, 32 },
> + [VCAP_IS1_HK_IP4_L3_IP4_SIP] = { 106, 32 },
> + [VCAP_IS1_HK_IP4_L3_PROTO] = { 138, 8 },
> + [VCAP_IS1_HK_IP4_TCP_UDP] = { 146, 1 },
> + [VCAP_IS1_HK_IP4_TCP] = { 147, 1 },
> + [VCAP_IS1_HK_IP4_L4_RNG] = { 148, 8 },
> + [VCAP_IS1_HK_IP4_IP_PAYLOAD_S1_5TUPLE] = { 156, 32 },
> +};
> +
> +static const struct vcap_field vsc7512_vcap_is1_actions[] = {
> + [VCAP_IS1_ACT_DSCP_ENA] = { 0, 1 },
> + [VCAP_IS1_ACT_DSCP_VAL] = { 1, 6 },
> + [VCAP_IS1_ACT_QOS_ENA] = { 7, 1 },
> + [VCAP_IS1_ACT_QOS_VAL] = { 8, 3 },
> + [VCAP_IS1_ACT_DP_ENA] = { 11, 1 },
> + [VCAP_IS1_ACT_DP_VAL] = { 12, 1 },
> + [VCAP_IS1_ACT_PAG_OVERRIDE_MASK] = { 13, 8 },
> + [VCAP_IS1_ACT_PAG_VAL] = { 21, 8 },
> + [VCAP_IS1_ACT_RSV] = { 29, 9 },
> + /* The fields below are incorrectly shifted by 2 in the manual */
> + [VCAP_IS1_ACT_VID_REPLACE_ENA] = { 38, 1 },
> + [VCAP_IS1_ACT_VID_ADD_VAL] = { 39, 12 },
> + [VCAP_IS1_ACT_FID_SEL] = { 51, 2 },
> + [VCAP_IS1_ACT_FID_VAL] = { 53, 13 },
> + [VCAP_IS1_ACT_PCP_DEI_ENA] = { 66, 1 },
> + [VCAP_IS1_ACT_PCP_VAL] = { 67, 3 },
> + [VCAP_IS1_ACT_DEI_VAL] = { 70, 1 },
> + [VCAP_IS1_ACT_VLAN_POP_CNT_ENA] = { 71, 1 },
> + [VCAP_IS1_ACT_VLAN_POP_CNT] = { 72, 2 },
> + [VCAP_IS1_ACT_CUSTOM_ACE_TYPE_ENA] = { 74, 4 },
> + [VCAP_IS1_ACT_HIT_STICKY] = { 78, 1 },
> +};
> +
> +static const struct vcap_field vsc7512_vcap_is2_keys[] = {
> + /* Common: 46 bits */
> + [VCAP_IS2_TYPE] = { 0, 4 },
> + [VCAP_IS2_HK_FIRST] = { 4, 1 },
> + [VCAP_IS2_HK_PAG] = { 5, 8 },
> + [VCAP_IS2_HK_IGR_PORT_MASK] = { 13, 12 },
> + [VCAP_IS2_HK_RSV2] = { 25, 1 },
> + [VCAP_IS2_HK_HOST_MATCH] = { 26, 1 },
> + [VCAP_IS2_HK_L2_MC] = { 27, 1 },
> + [VCAP_IS2_HK_L2_BC] = { 28, 1 },
> + [VCAP_IS2_HK_VLAN_TAGGED] = { 29, 1 },
> + [VCAP_IS2_HK_VID] = { 30, 12 },
> + [VCAP_IS2_HK_DEI] = { 42, 1 },
> + [VCAP_IS2_HK_PCP] = { 43, 3 },
> + /* MAC_ETYPE / MAC_LLC / MAC_SNAP / OAM common */
> + [VCAP_IS2_HK_L2_DMAC] = { 46, 48 },
> + [VCAP_IS2_HK_L2_SMAC] = { 94, 48 },
> + /* MAC_ETYPE (TYPE=000) */
> + [VCAP_IS2_HK_MAC_ETYPE_ETYPE] = { 142, 16 },
> + [VCAP_IS2_HK_MAC_ETYPE_L2_PAYLOAD0] = { 158, 16 },
> + [VCAP_IS2_HK_MAC_ETYPE_L2_PAYLOAD1] = { 174, 8 },
> + [VCAP_IS2_HK_MAC_ETYPE_L2_PAYLOAD2] = { 182, 3 },
> + /* MAC_LLC (TYPE=001) */
> + [VCAP_IS2_HK_MAC_LLC_L2_LLC] = { 142, 40 },
> + /* MAC_SNAP (TYPE=010) */
> + [VCAP_IS2_HK_MAC_SNAP_L2_SNAP] = { 142, 40 },
> + /* MAC_ARP (TYPE=011) */
> + [VCAP_IS2_HK_MAC_ARP_SMAC] = { 46, 48 },
> + [VCAP_IS2_HK_MAC_ARP_ADDR_SPACE_OK] = { 94, 1 },
> + [VCAP_IS2_HK_MAC_ARP_PROTO_SPACE_OK] = { 95, 1 },
> + [VCAP_IS2_HK_MAC_ARP_LEN_OK] = { 96, 1 },
> + [VCAP_IS2_HK_MAC_ARP_TARGET_MATCH] = { 97, 1 },
> + [VCAP_IS2_HK_MAC_ARP_SENDER_MATCH] = { 98, 1 },
> + [VCAP_IS2_HK_MAC_ARP_OPCODE_UNKNOWN] = { 99, 1 },
> + [VCAP_IS2_HK_MAC_ARP_OPCODE] = { 100, 2 },
> + [VCAP_IS2_HK_MAC_ARP_L3_IP4_DIP] = { 102, 32 },
> + [VCAP_IS2_HK_MAC_ARP_L3_IP4_SIP] = { 134, 32 },
> + [VCAP_IS2_HK_MAC_ARP_DIP_EQ_SIP] = { 166, 1 },
> + /* IP4_TCP_UDP / IP4_OTHER common */
> + [VCAP_IS2_HK_IP4] = { 46, 1 },
> + [VCAP_IS2_HK_L3_FRAGMENT] = { 47, 1 },
> + [VCAP_IS2_HK_L3_FRAG_OFS_GT0] = { 48, 1 },
> + [VCAP_IS2_HK_L3_OPTIONS] = { 49, 1 },
> + [VCAP_IS2_HK_IP4_L3_TTL_GT0] = { 50, 1 },
> + [VCAP_IS2_HK_L3_TOS] = { 51, 8 },
> + [VCAP_IS2_HK_L3_IP4_DIP] = { 59, 32 },
> + [VCAP_IS2_HK_L3_IP4_SIP] = { 91, 32 },
> + [VCAP_IS2_HK_DIP_EQ_SIP] = { 123, 1 },
> + /* IP4_TCP_UDP (TYPE=100) */
> + [VCAP_IS2_HK_TCP] = { 124, 1 },
> + [VCAP_IS2_HK_L4_DPORT] = { 125, 16 },
> + [VCAP_IS2_HK_L4_SPORT] = { 141, 16 },
> + [VCAP_IS2_HK_L4_RNG] = { 157, 8 },
> + [VCAP_IS2_HK_L4_SPORT_EQ_DPORT] = { 165, 1 },
> + [VCAP_IS2_HK_L4_SEQUENCE_EQ0] = { 166, 1 },
> + [VCAP_IS2_HK_L4_FIN] = { 167, 1 },
> + [VCAP_IS2_HK_L4_SYN] = { 168, 1 },
> + [VCAP_IS2_HK_L4_RST] = { 169, 1 },
> + [VCAP_IS2_HK_L4_PSH] = { 170, 1 },
> + [VCAP_IS2_HK_L4_ACK] = { 171, 1 },
> + [VCAP_IS2_HK_L4_URG] = { 172, 1 },
> + [VCAP_IS2_HK_L4_1588_DOM] = { 173, 8 },
> + [VCAP_IS2_HK_L4_1588_VER] = { 181, 4 },
> + /* IP4_OTHER (TYPE=101) */
> + [VCAP_IS2_HK_IP4_L3_PROTO] = { 124, 8 },
> + [VCAP_IS2_HK_L3_PAYLOAD] = { 132, 56 },
> + /* IP6_STD (TYPE=110) */
> + [VCAP_IS2_HK_IP6_L3_TTL_GT0] = { 46, 1 },
> + [VCAP_IS2_HK_L3_IP6_SIP] = { 47, 128 },
> + [VCAP_IS2_HK_IP6_L3_PROTO] = { 175, 8 },
> + /* OAM (TYPE=111) */
> + [VCAP_IS2_HK_OAM_MEL_FLAGS] = { 142, 7 },
> + [VCAP_IS2_HK_OAM_VER] = { 149, 5 },
> + [VCAP_IS2_HK_OAM_OPCODE] = { 154, 8 },
> + [VCAP_IS2_HK_OAM_FLAGS] = { 162, 8 },
> + [VCAP_IS2_HK_OAM_MEPID] = { 170, 16 },
> + [VCAP_IS2_HK_OAM_CCM_CNTS_EQ0] = { 186, 1 },
> + [VCAP_IS2_HK_OAM_IS_Y1731] = { 187, 1 },
> +};
> +
> +static const struct vcap_field vsc7512_vcap_is2_actions[] = {
> + [VCAP_IS2_ACT_HIT_ME_ONCE] = { 0, 1 },
> + [VCAP_IS2_ACT_CPU_COPY_ENA] = { 1, 1 },
> + [VCAP_IS2_ACT_CPU_QU_NUM] = { 2, 3 },
> + [VCAP_IS2_ACT_MASK_MODE] = { 5, 2 },
> + [VCAP_IS2_ACT_MIRROR_ENA] = { 7, 1 },
> + [VCAP_IS2_ACT_LRN_DIS] = { 8, 1 },
> + [VCAP_IS2_ACT_POLICE_ENA] = { 9, 1 },
> + [VCAP_IS2_ACT_POLICE_IDX] = { 10, 9 },
> + [VCAP_IS2_ACT_POLICE_VCAP_ONLY] = { 19, 1 },
> + [VCAP_IS2_ACT_PORT_MASK] = { 20, 11 },
> + [VCAP_IS2_ACT_REW_OP] = { 31, 9 },
> + [VCAP_IS2_ACT_SMAC_REPLACE_ENA] = { 40, 1 },
> + [VCAP_IS2_ACT_RSV] = { 41, 2 },
> + [VCAP_IS2_ACT_ACL_ID] = { 43, 6 },
> + [VCAP_IS2_ACT_HIT_CNT] = { 49, 32 },
> +};
> +
> +static struct vcap_props vsc7512_vcap_props[] = {
> + [VCAP_ES0] = {
> + .action_type_width = 0,
> + .action_table = {
> + [ES0_ACTION_TYPE_NORMAL] = {
> + .width = 73,
> + .count = 1,
> + },
> + },
> + .target = S0,
> + .keys = vsc7512_vcap_es0_keys,
> + .actions = vsc7512_vcap_es0_actions,
> + },
> + [VCAP_IS1] = {
> + .action_type_width = 0,
> + .action_table = {
> + [IS1_ACTION_TYPE_NORMAL] = {
> + .width = 78,
> + .count = 4,
> + },
> + },
> + .target = S1,
> + .keys = vsc7512_vcap_is1_keys,
> + .actions = vsc7512_vcap_is1_actions,
> + },
> + [VCAP_IS2] = {
> + .action_type_width = 1,
> + .action_table = {
> + [IS2_ACTION_TYPE_NORMAL] = {
> + .width = 49,
> + .count = 2,
> + },
> + [IS2_ACTION_TYPE_SMAC_SIP] = {
> + .width = 6,
> + .count = 4,
> + },
> + },
> + .target = S2,
> + .keys = vsc7512_vcap_is2_keys,
> + .actions = vsc7512_vcap_is2_actions,
> + },
> +};
> +
> +static struct regmap *vsc7512_regmap_init(struct ocelot *ocelot,
> + struct resource *res, u32 *offset)
> +{
> + struct felix *felix = ocelot_to_felix(ocelot);
> + struct felix_spi_data *felix_spi = container_of(felix, struct
> + felix_spi_data, felix);
> +
> + // Use offset instead of res, since we don't have MMIO for SPI
> + *offset = res->start;
> + return felix_spi->map;
> +}
> +
> +static const struct felix_info felix_spi_info = {
> + .target_io_res = vsc7512_target_io_res,
> + .port_io_res = vsc7512_port_io_res,
> + .imdio_res = NULL,
> + .regfields = vsc7512_regfields,
> + .map = vsc7512_regmap,
> + .ops = &vsc7512_ops,
> + .stats_layout = vsc7512_stats_layout,
> + .num_stats = ARRAY_SIZE(vsc7512_stats_layout),
> +
> + .vcap = vsc7512_vcap_props,
> +
> + // Not sure about these
> + .num_mact_rows = 2048,

Chapter 3.9.1. MAC table
The analyzer contains a MAC table with 4096 entries containing
information about stations learned by the device. The table is organized
as a hash table with four buckets and 1024 rows. Each row is indexed by
an 10-bit hash value, which is calculated based on the station’s (MAC,
VID) pair, as shown in the following illustration.

So... 1024, not 2048.

> + .num_ports = 6,

Confused, Microchip says it's a 10 port switch:
https://www.microchip.com/wwwproducts/en/VSC7512

> + .num_tx_queues = OCELOT_NUM_TC,
> + .switch_pci_bar = 0,
> + .imdio_pci_bar = 0,

In hindsight, these have nothing to do in struct felix_info. And they
are only used in felix_pci_probe for vsc9959. Could you please send
one more patch, before this one but part of the same series, removing
switch_pci_bar and imdio_pci_bar from struct felix_info, and replacing
their use with some constants VSC9959_SWITCH_PCI_BAR, VSC9959_IMDIO_PCI_BAR?
These represent the organization of hardware blocks within PCIe PF
0000:00:00.5 (the switch) on NXP LS1028A.

> +
> + // Force ocelot->ptp to 0
> + .ptp_caps = NULL,

Comment is weird, this is not forcing anything to anything.

> +
> + // No need for this?
> + .mdio_bus_alloc = NULL,
> + .mdio_bus_free = NULL,

Yes, no need for this => just delete the NULL pointer initializers.

> + .phylink_validate = vsc7512_phylink_validate,
> + .prevalidate_phy_mode = vsc7512_prevalidate_phy_mode,
> + .port_setup_tc = vsc7512_port_setup_tc,
> + .port_sched_speed_set = vsc7512_sched_speed_set,
> + .init_regmap = vsc7512_regmap_init,

Please align the "=" character too, like this:

.prevalidate_phy_mode = vsc7512_prevalidate_phy_mode,

> +};
> +
> +static int felix_spi_probe(struct spi_device *spi)
> +{
> + struct dsa_switch *ds;
> + struct ocelot *ocelot;
> + struct felix *felix;
> + int err;
> + struct felix_spi_data *felix_spi;

As part of the networking coding style, please keep variable declaration
in decreasing order of line length.

> +
> + pr_info("felix_spi: CS: %d M: %d, BPW: %d, MaxSpeed: %d\n",
> + spi->chip_select, spi->mode, spi->bits_per_word,
> + spi->max_speed_hz);

I find it weird and confusing that you print the bits_per_word and
max_speed_hz and then you change them immediately afterwards. What's the
user going to think?

Also, please don't hardcode the SPIfrequency in the driver, DT exists
for that.

> + felix_spi = devm_kzalloc(&spi->dev, sizeof(struct felix_spi_data),
> + GFP_KERNEL);
> +
> + if (!felix_spi)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&spi->dev, felix_spi);
> +
> + spi->bits_per_word = 8;
> +
> + /* TODO: There are a couple of goals to achieve. Step 1: Get the device
> + * working in slow SPI mode with a fixed bit and byte order. Fixing this
> + * should allow devm_regmap_init_spi to be used directly, though there
> + * are penalties incurred. Specifically the bus is running much slower
> + * than it could, hindering performance.
> + *
> + * Operating at a faster SPI rate could boost performance significantly
> + * with fixed delays or padding bytes. Especially on consecutive reads.
> + *
> + * Ideally the SPI bus would be configured to run at the configured
> + * speed / fastest speed possible with consecutive reads / writes
> + * enabled, if supported. For reads, we would have to reason about the
> + * speed vs the delay time or the number of padding bytes.
> + */
> +
> + spi->max_speed_hz = 500000;
> + err = spi_setup(spi);
> + if (err < 0) {
> + dev_err(&spi->dev, "Error %d initializing SPI\n", err);
> + return err;
> + }
> +
> + felix_spi->map = devm_regmap_init_spi(spi, &felix_spi_regmap_config);
> +
> + if (IS_ERR(felix_spi->map)) {
> + dev_err(&spi->dev, "regmap init failed\n");
> + return PTR_ERR(felix_spi->map);
> + }
> +
> + err = felix_spi_init_bus(spi, felix_spi);
> + if (err < 0) {
> + dev_err(&spi->dev, "device init failed: %d\n", err);
> + return err;
> + }
> +
> + felix = &felix_spi->felix;
> +
> + ocelot = &felix->ocelot;
> + ocelot->dev = &spi->dev;
> +
> + // Not sure about this
> + ocelot->num_flooding_pgids = OCELOT_NUM_TC;

In general when you're not sure, use git blame and see why the property
was added and why. In this case, see commit 3c7b51bd39b2 ("net: dsa:
felix: allow flooding for all traffic classes") and then edd2410b165e
("net: mscc: ocelot: fix dropping of unknown IPv4 multicast on Seville").
In this case, num_flooding_pgids should most likely be 1.

> +
> + felix->info = &felix_spi_info;
> +
> + ocelot->ptp = 0;

ocelot, as a member structure of felix, is zero-initialized because it
is allocated with kzalloc. So this doesn't do anything.

> +
> + ds = kzalloc(sizeof(*ds), GFP_KERNEL);
> + if (!ds) {
> + err = -ENOMEM;
> + dev_err(&spi->dev, "Failed to allocate DSA switch\n");
> + goto err_alloc_ds;
> + }
> +
> + ds->dev = &spi->dev;
> + ds->num_ports = felix->info->num_ports;
> + ds->num_tx_queues = felix->info->num_tx_queues;
> + ds->ops = &felix_switch_ops;
> + ds->priv = ocelot;
> +
> + err = dsa_register_switch(ds);
> + if (err) {
> + dev_err(&spi->dev, "Failed to register DSA switch: %d\n", err);
> + goto err_register_ds;
> + }
> +
> + return 0;
> +
> +err_register_ds:
> + kfree(ds);
> +err_alloc_ds:
> + kfree(felix);
> + return err;
> +}
> +
> +static int felix_spi_remove(struct spi_device *pdev)
> +{
> + struct felix *felix;
> +
> + felix = spi_get_drvdata(pdev);
> +
> + return 0;
> +}

You got bored of writing code here? :)

> +
> +const struct of_device_id vsc7512_of_match[] = { { .compatible =
> + "mscc,vsc7512" },
> + {} };
> +MODULE_DEVICE_TABLE(of, vsc7512_of_match);

Indentation is very odd.

> +
> +static struct spi_driver felix_vsc7512_spi_driver = {
> + .driver = {
> + .name = "vsc7512",
> + .of_match_table = of_match_ptr(vsc7512_of_match),
> + },
> + .probe = felix_spi_probe,
> + .remove = felix_spi_remove,
> +};
> +module_spi_driver(felix_vsc7512_spi_driver);
> +
> +MODULE_DESCRIPTION("Felix Switch SPI driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
> index ad45c1af4be9..8b6e0574f294 100644
> --- a/include/soc/mscc/ocelot.h
> +++ b/include/soc/mscc/ocelot.h
> @@ -127,6 +127,7 @@ enum ocelot_target {
> PTP,
> GCB,
> DEV_GMII,
> + DEV_CPUORG,
> TARGET_MAX,
> };
>
> @@ -444,6 +445,20 @@ enum ocelot_reg {
> PCS1G_TSTPAT_STATUS,
> DEV_PCS_FX100_CFG,
> DEV_PCS_FX100_STATUS,
> + DEV_CPUORG_IF_CTRL = DEV_CPUORG << TARGET_OFFSET,
> + DEV_CPUORG_IF_CFGSTAT,
> + DEV_CPUORG_ORG_CFG,
> + DEV_CPUORG_ERR_CNTS,
> + DEV_CPUORG_TIMEOUT_CFG,
> + DEV_CPUORG_GPR,
> + DEV_CPUORG_MAILBOX_SET,
> + DEV_CPUORG_MAILBOX_CLR,
> + DEV_CPUORG_MAILBOX,
> + DEV_CPUORG_SEMA_CFG,
> + DEV_CPUORG_SEMA0,
> + DEV_CPUORG_SEMA0_OWNER,
> + DEV_CPUORG_SEMA1,
> + DEV_CPUORG_SEMA1_OWNER,
> };
>
> enum ocelot_regfield {
> --
> 2.25.1
>