Re: [PATCH 11/14] drivers: net: dsa: qca8k: apply switch revision fix

From: Florian Fainelli
Date: Thu Apr 22 2021 - 22:02:43 EST




On 4/22/2021 6:47 PM, Ansuel Smith wrote:
> qca8k require special debug value based on the switch revision.
>
> Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
> ---
> drivers/net/dsa/qca8k.c | 23 +++++++++++++++++++++--
> 1 file changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
> index 193c269d8ed3..12d2c97d1417 100644
> --- a/drivers/net/dsa/qca8k.c
> +++ b/drivers/net/dsa/qca8k.c
> @@ -909,7 +909,7 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
> {
> const struct qca8k_match_data *data;
> struct qca8k_priv *priv = ds->priv;
> - u32 reg, val;
> + u32 phy, reg, val;
>
> /* get the switches ID from the compatible */
> data = of_device_get_match_data(priv->dev);
> @@ -928,7 +928,26 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
> case 3:
> case 4:
> case 5:
> - /* Internal PHY, nothing to do */
> + /* Internal PHY, apply revision fixup */
> + phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
> + switch (priv->switch_revision) {
> + case 1:
> + /* For 100M waveform */
> + qca8k_phy_dbg_write(priv, phy, 0, 0x02ea);
> + /* Turn on Gigabit clock */
> + qca8k_phy_dbg_write(priv, phy, 0x3d, 0x68a0);
> + break;
> +
> + case 2:
> + qca8k_phy_mmd_write(priv, phy, 0x7, 0x3c, 0x0);
> + fallthrough;
> + case 4:
> + qca8k_phy_mmd_write(priv, phy, 0x3, 0x800d, 0x803f);
> + qca8k_phy_dbg_write(priv, phy, 0x3d, 0x6860);
> + qca8k_phy_dbg_write(priv, phy, 0x5, 0x2c46);
> + qca8k_phy_dbg_write(priv, phy, 0x3c, 0x6000);
> + break;

This would be better done with a PHY driver that is specific to the
integrated PHY found in these switches, it would provide a nice clean
layer and would allow you to expose additional features like cable
tests, PHY statistics/counters, etc.
--
Florian