Re: [PATCH v4 1/9] ASoC: dt-bindings: wcd938x: add bindings for wcd938x

From: Rob Herring
Date: Thu Apr 15 2021 - 12:29:58 EST


On Wed, Apr 14, 2021 at 04:48:37PM +0100, Srinivas Kandagatla wrote:
> Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC
> connected over SoundWire. This device has two SoundWire device RX and
> TX respectively, supporting 4 x ADCs, ClassH, Ear, Aux PA, 2xHPH,
> 7 x TX diff inputs, 8 DMICs, MBHC.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> .../bindings/sound/qcom,wcd938x.yaml | 176 ++++++++++++++++++
> 1 file changed, 176 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
> new file mode 100644
> index 000000000000..4c8fa8290af0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
> @@ -0,0 +1,176 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,wcd938x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bindings for Qualcomm WCD9380/WCD9385 Audio Codec
> +
> +maintainers:
> + - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> +
> +description: |
> + Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
> + It has RX and TX Soundwire slave devices.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,wcd9380-codec
> + - qcom,wcd9385-codec
> +
> + reset-gpios:
> + description: GPIO spec for reset line to use
> + maxItems: 1
> +
> + vdd-buck-supply:
> + description: A reference to the 1.8V buck supply
> +
> + vdd-rxtx-supply:
> + description: A reference to the 1.8V rx supply
> +
> + vdd-io-supply:
> + description: A reference to the 1.8V I/O supply
> +
> + qcom,tx-device:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + maxItems: 1
> + description: A reference to Soundwire tx device phandle
> +
> + qcom,rx-device:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + maxItems: 1
> + description: A reference to Soundwire rx device phandle
> +
> + qcom,micbias1-microvolt:
> + description: micbias1 voltage
> + minimum: 1800000
> + maximum: 2850000
> +
> + qcom,micbias2-microvolt:
> + description: micbias2 voltage
> + minimum: 1800000
> + maximum: 2850000
> +
> + qcom,micbias3-microvolt:
> + description: micbias3 voltage
> + minimum: 1800000
> + maximum: 2850000
> +
> + qcom,micbias4-microvolt:
> + description: micbias4 voltage
> + minimum: 1800000
> + maximum: 2850000
> +
> + qcom,mbhc-hphl-switch:
> + description: Indicates that HPHL switch type is normally closed
> + type: boolean
> +
> + qcom,mbhc-ground-switch:
> + description: Indicates that Headset Ground switch type is normally closed
> + type: boolean
> +
> + qcom,mbhc-button0-vthreshold-microvolt:
> + description: Voltage threshold value headset button0
> + minimum: 0
> + maximum: 500000
> +
> + qcom,mbhc-button1-vthreshold-microvolt:
> + description: Voltage threshold value headset button1
> + minimum: 0
> + maximum: 500000
> +
> + qcom,mbhc-button2-vthreshold-microvolt:
> + description: Voltage threshold value headset button2
> + minimum: 0
> + maximum: 500000
> +
> + qcom,mbhc-button3-vthreshold-microvolt:
> + description: Voltage threshold value headset button3
> + minimum: 0
> + maximum: 500000
> +
> + qcom,mbhc-button4-vthreshold-microvolt:
> + description: Voltage threshold value headset button4
> + minimum: 0
> + maximum: 500000
> +
> + qcom,mbhc-button5-vthreshold-microvolt:
> + description: Voltage threshold value headset button5
> + minimum: 0
> + maximum: 500000
> +
> + qcom,mbhc-button6-vthreshold-microvolt:
> + description: Voltage threshold value headset button6
> + minimum: 0
> + maximum: 500000
> +
> + qcom,mbhc-button7-vthreshold-microvolt:
> + description: Voltage threshold value headset button7
> + minimum: 0
> + maximum: 500000
> +
> + '#sound-dai-cells':
> + const: 1
> +
> +required:
> + - compatible
> + - reset-gpios
> + - qcom,tx-device
> + - qcom,rx-device
> + - qcom,micbias1-microvolt
> + - qcom,micbias2-microvolt
> + - qcom,micbias3-microvolt
> + - qcom,micbias4-microvolt
> + - qcom,mbhc-hphl-switch
> + - qcom,mbhc-ground-switch
> + - "#sound-dai-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + codec {
> + compatible = "qcom,wcd9380-codec";
> + reset-gpios = <&tlmm 32 0>;
> + #sound-dai-cells = <1>;
> + qcom,tx-device = <&wcd938x_tx>;
> + qcom,rx-device = <&wcd938x_rx>;
> + qcom,micbias1-microvolt = <1800000>;
> + qcom,micbias2-microvolt = <1800000>;
> + qcom,micbias3-microvolt = <1800000>;
> + qcom,micbias4-microvolt = <1800000>;
> + qcom,mbhc-hphl-switch;
> + qcom,mbhc-ground-switch;
> + qcom,mbhc-button0-vthreshold-microvolt = <75000>;
> + qcom,mbhc-button1-vthreshold-microvolt = <150000>;
> + qcom,mbhc-button2-vthreshold-microvolt = <237000>;
> + qcom,mbhc-button3-vthreshold-microvolt = <500000>;
> + qcom,mbhc-button5-vthreshold-microvolt = <500000>;
> + qcom,mbhc-button6-vthreshold-microvolt = <500000>;
> + qcom,mbhc-button7-vthreshold-microvolt = <500000>;
> + };
> +
> + /* ... */
> +
> + soundwire@3230000 {
> + #address-cells = <2>;
> + #size-cells = <0>;
> + reg = <0x03230000 0x2000>;
> + wcd938x_tx: codec@0,3 {
> + compatible = "sdw20217010d00";
> + reg = <0 3>;
> + qcom,direction = "tx";
> + qcom,port-mapping = <2 3 4 5>;
> + };
> +
> + wcd938x_rx: codec@0,4 {
> + compatible = "sdw20217010d00";
> + reg = <0 4>;
> + qcom,direction = "rx";
> + qcom,port-mapping = <1 2 3 4 5>;
> + };

This is a single device, right? We shouldn't need 3 nodes to describe
it. I think this should all be a single node like this:

codec@0,3 {
reg = <0 3>, <0 4>;
compatible = "sdw20217010d00";

reset-gpios = <&tlmm 32 0>;
#sound-dai-cells = <1>;
qcom,micbias1-microvolt = <1800000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <1800000>;
qcom,micbias4-microvolt = <1800000>;
qcom,mbhc-hphl-switch;
qcom,mbhc-ground-switch;
qcom,mbhc-button0-vthreshold-microvolt = <75000>;
qcom,mbhc-button1-vthreshold-microvolt = <150000>;
qcom,mbhc-button2-vthreshold-microvolt = <237000>;
qcom,mbhc-button3-vthreshold-microvolt = <500000>;
qcom,mbhc-button5-vthreshold-microvolt = <500000>;
qcom,mbhc-button6-vthreshold-microvolt = <500000>;
qcom,mbhc-button7-vthreshold-microvolt = <500000>;
};

You'll have to figure out the qcom,direction and qcom,port-mapping parts
though.

Rob