Re: [PATCH] net: phy: marvell: fix detection of PHY on Topaz switches

[Pali Rohár]

On Monday 12 April 2021 16:44:11 Andrew Lunn wrote:
> On Mon, Apr 12, 2021 at 03:34:47PM +0200, Pali Rohár wrote:
> > On Monday 12 April 2021 15:15:07 Andrew Lunn wrote:
> > > > +static u16 mv88e6xxx_physid_for_family(enum mv88e6xxx_family family);
> > > > +
> > > 
> > > No forward declaration please. Move the code around. It is often best
> > > to do that in a patch which just moves code, no other changes. It
> > > makes it easier to review.
> > 
> > Avoiding forward declaration would mean to move about half of source
> > code. mv88e6xxx_physid_for_family depends on mv88e6xxx_table which
> > depends on all _ops structures which depends on all lot of other
> > functions.
> 
> So this is basically what you are trying to do:
> 
> diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
> index 903d619e08ed..ef4dbcb052b7 100644
> --- a/drivers/net/dsa/mv88e6xxx/chip.c
> +++ b/drivers/net/dsa/mv88e6xxx/chip.c
> @@ -3026,6 +3026,18 @@ static int mv88e6xxx_setup(struct dsa_switch *ds)
>         return err;
>  }
>  
> +static const enum mv88e6xxx_model family_model_table[] = {
> +       [MV88E6XXX_FAMILY_6095] = MV88E6XXX_PORT_SWITCH_ID_PROD_6095,
> +       [MV88E6XXX_FAMILY_6097] = MV88E6XXX_PORT_SWITCH_ID_PROD_6097,
> +       [MV88E6XXX_FAMILY_6185] = MV88E6XXX_PORT_SWITCH_ID_PROD_6185,
> +       [MV88E6XXX_FAMILY_6250] = MV88E6XXX_PORT_SWITCH_ID_PROD_6250,
> +       [MV88E6XXX_FAMILY_6320] = MV88E6XXX_PORT_SWITCH_ID_PROD_6320,
> +       [MV88E6XXX_FAMILY_6341] = MV88E6XXX_PORT_SWITCH_ID_PROD_6341,
> +       [MV88E6XXX_FAMILY_6351] = MV88E6XXX_PORT_SWITCH_ID_PROD_6351,
> +       [MV88E6XXX_FAMILY_6352] = MV88E6XXX_PORT_SWITCH_ID_PROD_6352,
> +       [MV88E6XXX_FAMILY_6390] = MV88E6XXX_PORT_SWITCH_ID_PROD_6390,
> +};

Ok, no problem. I can change it in this way. I just thought that if
prod_id is already defined for every model in mv88e6xxx_table[] table I
could reuse it, instead of duplicating it...

Anyway, now I'm looking at phy/marvell.c driver again and it supports
only 88E6341 and 88E6390 families from whole 88E63xxx range.

So do we need to define for now table for more than
MV88E6XXX_FAMILY_6341 and MV88E6XXX_FAMILY_6390 entries?

> +
>  static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
>  {
>         struct mv88e6xxx_mdio_bus *mdio_bus = bus->priv;
> @@ -3056,7 +3068,7 @@ static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
>                          * a PHY,
>                          */
>                         if (!(val & 0x3f0))
> -                               val |= MV88E6XXX_PORT_SWITCH_ID_PROD_6390 >> 4;
> +                               val |= family_model_table[chip->info->family] >> 4;
>         }
> 
> and it compiles. No forward declarations needed. It is missing all the
> error checking etc, but i don't see why that should change the
> dependencies.
> 
> 	Andrew