Re: [PATCH v5 2/3] dt-bindings: touchscreen: Add HY46XX bindings

[Giulio Benetti]

> Il giorno 12 apr 2021, alle ore 16:46, Rob Herring <robh@xxxxxxxxxx> ha scritto:
> 
> On Sun, Apr 11, 2021 at 01:48:03PM +0200, Giulio Benetti wrote:
>> This adds device tree bindings for the Hycon HY46XX touchscreen series.
>> 
>> Signed-off-by: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxxxxxxxx>
>> ---
>> V1->V2:
>> As suggested by Rob Herring:
>> * fixed $id: address
>> * added "hycon," in front of every custom property
>> * changed all possible property to boolean type
>> * removed proximity-sensor-switch property since it's not handled in driver
>> V2->V3:
>> As suggested by Jonathan Neuschäfer:
>> * fixed some typo
>> * fixed description indentation
>> * improved boolean properties descriptions
>> * improved hycon,report-speed description
>> V3->V4:
>> * fixed binding compatible string in example as suggested by Jonathan Neuschäfer
>> V4->V5:
>> As suggested by Rob Herring:
>> * drop hycon- prefix from compatible
>> * use Hertz unit suffix for hycon,report-speed instead of u32
> 
> hycon,report-speed-hz

Thank you, I’m going to send V6 series.

Giulio

> 
>> * set hycon,report-speed minimum to 1Hz, 0Hz make controller to do nothing
>> * change hycon,power-noise-enable property name to hycon,noise-filter-enable
>> * improve hycon,filter-data property description
>> * use generic touchscreen node name in example
>> ---
>> .../input/touchscreen/hycon,hy46xx.yaml       | 119 ++++++++++++++++++
>> MAINTAINERS                                   |   6 +
>> 2 files changed, 125 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
>> new file mode 100644
>> index 000000000000..ae792e3716ff
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
>> @@ -0,0 +1,119 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Hycon HY46XX series touchscreen controller bindings
>> +
>> +description: |
>> +  There are 6 variants of the chip for various touch panel sizes and cover lens material
>> +   Glass: 0.3mm--4.0mm
>> +    PET/PMMA: 0.2mm--2.0mm
>> +    HY4613(B)-N048  < 6"
>> +    HY4614(B)-N068  7" .. 10.1"
>> +    HY4621-NS32  < 5"
>> +    HY4623-NS48  5.1" .. 7"
>> +   Glass: 0.3mm--8.0mm
>> +    PET/PMMA: 0.2mm--4.0mm
>> +    HY4633(B)-N048  < 6"
>> +    HY4635(B)-N048  < 7" .. 10.1"
>> +
>> +maintainers:
>> +  - Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxxxxxxxx>
>> +
>> +allOf:
>> +  - $ref: touchscreen.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - hycon,hy4613
>> +      - hycon,hy4614
>> +      - hycon,hy4621
>> +      - hycon,hy4623
>> +      - hycon,hy4633
>> +      - hycon,hy4635
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  reset-gpios:
>> +    maxItems: 1
>> +
>> +  vcc-supply: true
>> +
>> +  hycon,threshold:
>> +    description: Allows setting the sensitivity in the range from 0 to 255.
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    minimum: 0
>> +    maximum: 255
>> +
>> +  hycon,glove-enable:
>> +    type: boolean
>> +    description: Allows enabling glove setting.
>> +
>> +  hycon,report-speed:
>> +    description: Allows setting the report speed in Hertz.
>> +    minimum: 1
>> +    maximum: 255
>> +
>> +  hycon,noise-filter-enable:
>> +    type: boolean
>> +    description: Allows enabling power noise filter.
>> +
>> +  hycon,filter-data:
>> +    description: Allows setting how many samples throw before reporting touch
>> +                 in the range from 0 to 5.
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    minimum: 0
>> +    maximum: 5
>> +
>> +  hycon,gain:
>> +    description: Allows setting the sensitivity distance in the range from 0 to 5.
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    minimum: 0
>> +    maximum: 5
>> +
>> +  hycon,edge-offset:
>> +    description: Allows setting the edge compensation in the range from 0 to 16.
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    minimum: 0
>> +    maximum: 16
>> +
>> +  touchscreen-size-x: true
>> +  touchscreen-size-y: true
>> +  touchscreen-fuzz-x: true
>> +  touchscreen-fuzz-y: true
>> +  touchscreen-inverted-x: true
>> +  touchscreen-inverted-y: true
>> +  touchscreen-swapped-x-y: true
>> +  interrupt-controller: true
>> +
>> +additionalProperties: false
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/gpio/gpio.h>
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    i2c {
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +      touchscreen@1c {
>> +        compatible = "hycon,hy4633";
>> +        reg = <0x1c>;
>> +        interrupt-parent = <&gpio2>;
>> +        interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
>> +        reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
>> +      };
>> +    };
>> +
>> +...
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 7fdc513392f4..18a50942c019 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -8250,6 +8250,12 @@ S:    Maintained
>> F:    mm/hwpoison-inject.c
>> F:    mm/memory-failure.c
>> 
>> +HYCON HY46XX TOUCHSCREEN SUPPORT
>> +M:    Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxxxxxxxx>
>> +L:    linux-input@xxxxxxxxxxxxxxx
>> +S:    Maintained
>> +F:    Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
>> +
>> HYGON PROCESSOR SUPPORT
>> M:    Pu Wen <puwen@xxxxxxxx>
>> L:    linux-kernel@xxxxxxxxxxxxxxx
>> -- 
>> 2.25.1
>>