Re: [PATCH v2 04/30] media: atmel: atmel-isc: specialize max width and max height

[Jacopo Mondi]

Ups,

On Mon, Apr 12, 2021 at 11:43:12AM +0200, Jacopo Mondi wrote:
> Hi Eugene,
>
> On Mon, Apr 05, 2021 at 06:50:39PM +0300, Eugen Hristev wrote:
> > Move the max width and max height constants to the product specific driver
> > and have them in the device struct.
> >
> > Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
> > ---
> >  drivers/media/platform/atmel/atmel-isc-base.c | 28 +++++++++----------
> >  drivers/media/platform/atmel/atmel-isc.h      |  9 ++++--
> >  .../media/platform/atmel/atmel-sama5d2-isc.c  |  7 +++--
> >  3 files changed, 25 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
> > index 45fc8dbb7943..350076dd029a 100644
> > --- a/drivers/media/platform/atmel/atmel-isc-base.c
> > +++ b/drivers/media/platform/atmel/atmel-isc-base.c
> > @@ -1204,8 +1204,8 @@ static void isc_try_fse(struct isc_device *isc,
> >  	 * just use the maximum ISC can receive.
> >  	 */
> >  	if (ret) {
> > -		pad_cfg->try_crop.width = ISC_MAX_SUPPORT_WIDTH;
> > -		pad_cfg->try_crop.height = ISC_MAX_SUPPORT_HEIGHT;
> > +		pad_cfg->try_crop.width = isc->max_width;
> > +		pad_cfg->try_crop.height = isc->max_height;
> >  	} else {
> >  		pad_cfg->try_crop.width = fse.max_width;
> >  		pad_cfg->try_crop.height = fse.max_height;
> > @@ -1282,10 +1282,10 @@ static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f,
> >  	isc->try_config.sd_format = sd_fmt;
> >
> >  	/* Limit to Atmel ISC hardware capabilities */
> > -	if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
> > -		pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
> > -	if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
> > -		pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
> > +	if (pixfmt->width > isc->max_width)
> > +		pixfmt->width = isc->max_width;
> > +	if (pixfmt->height > isc->max_height)
> > +		pixfmt->height = isc->max_height;
> >
> >  	/*
> >  	 * The mbus format is the one the subdev outputs.
> > @@ -1327,10 +1327,10 @@ static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f,
> >  	v4l2_fill_pix_format(pixfmt, &format.format);
> >
> >  	/* Limit to Atmel ISC hardware capabilities */
> > -	if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
> > -		pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
> > -	if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
> > -		pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
> > +	if (pixfmt->width > isc->max_width)
> > +		pixfmt->width = isc->max_width;
> > +	if (pixfmt->height > isc->max_height)
> > +		pixfmt->height = isc->max_height;
>
> What happens if the sensor sends a frame larger that the ISC max
> supported sizes ?
>

I meant to ask this question on the previous patch :/

> >
> >  	pixfmt->field = V4L2_FIELD_NONE;
> >  	pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp) >> 3;
> > @@ -1368,10 +1368,10 @@ static int isc_set_fmt(struct isc_device *isc, struct v4l2_format *f)
> >  		return ret;
> >
> >  	/* Limit to Atmel ISC hardware capabilities */
> > -	if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
> > -		pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
> > -	if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
> > -		pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
> > +	if (f->fmt.pix.width > isc->max_width)
> > +		f->fmt.pix.width = isc->max_width;
> > +	if (f->fmt.pix.height > isc->max_height)
> > +		f->fmt.pix.height = isc->max_height;
> >
> >  	isc->fmt = *f;
> >
> > diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
> > index 8d81d9967ad2..6becc6c3aaf0 100644
> > --- a/drivers/media/platform/atmel/atmel-isc.h
> > +++ b/drivers/media/platform/atmel/atmel-isc.h
> > @@ -10,9 +10,6 @@
> >   */
> >  #ifndef _ATMEL_ISC_H_
> >
> > -#define ISC_MAX_SUPPORT_WIDTH   2592
> > -#define ISC_MAX_SUPPORT_HEIGHT  1944
> > -
> >  #define ISC_CLK_MAX_DIV		255
> >
> >  enum isc_clk_id {
> > @@ -191,6 +188,9 @@ struct isc_ctrls {
> >   * @gamma_table:	pointer to the table with gamma values, has
> >   *			gamma_max sets of GAMMA_ENTRIES entries each
> >   * @gamma_max:		maximum number of sets of inside the gamma_table
> > + *
> > + * @max_width:		maximum frame width, dependent on the internal RAM
> > + * @max_height:		maximum frame height, dependent on the internal RAM
> >   */
> >  struct isc_device {
> >  	struct regmap		*regmap;
> > @@ -254,6 +254,9 @@ struct isc_device {
> >  	/* pointer to the defined gamma table */
> >  	const u32	(*gamma_table)[GAMMA_ENTRIES];
> >  	u32		gamma_max;
> > +
> > +	u32		max_width;
> > +	u32		max_height;
> >  };
> >
> >  extern struct isc_format formats_list[];
> > diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> > index f45d8b96bfb8..f8d1c8ba99b3 100644
> > --- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> > +++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> > @@ -49,8 +49,8 @@
> >  #include "atmel-isc-regs.h"
> >  #include "atmel-isc.h"
> >
> > -#define ISC_MAX_SUPPORT_WIDTH   2592
> > -#define ISC_MAX_SUPPORT_HEIGHT  1944
> > +#define ISC_SAMA5D2_MAX_SUPPORT_WIDTH   2592
> > +#define ISC_SAMA5D2_MAX_SUPPORT_HEIGHT  1944
> >
> >  #define ISC_CLK_MAX_DIV		255
> >
> > @@ -195,6 +195,9 @@ static int atmel_isc_probe(struct platform_device *pdev)
> >  	isc->gamma_table = isc_sama5d2_gamma_table;
> >  	isc->gamma_max = 2;
> >
> > +	isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH;
> > +	isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT;
> > +
> >  	ret = isc_pipeline_init(isc);
> >  	if (ret)
> >  		return ret;
> > --
> > 2.25.1
> >