Re: [Outreachy kernel] Re: [PATCH 1/2] media: zoran: add spaces around '<<'

From: Julia Lawall
Date: Fri Apr 09 2021 - 13:26:52 EST




On Fri, 9 Apr 2021, Mitali Borkar wrote:

> On Fri, Apr 09, 2021 at 09:23:22AM +0200, Hans Verkuil wrote:
> > Hi Mitali,
> >
> > On 08/04/2021 22:38, Mitali Borkar wrote:
> > > Added spaces around '<<' operator to improve readability and meet linux
> > > kernel coding style.
> > > Reported by checkpatch
> > >
> > > Signed-off-by: Mitali Borkar <mitaliborkar810@xxxxxxxxx>
> > > ---
> > > drivers/staging/media/zoran/zr36057.h | 14 +++++++-------
> > > 1 file changed, 7 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/drivers/staging/media/zoran/zr36057.h b/drivers/staging/media/zoran/zr36057.h
> > > index 71b651add35a..a2a75fd9f535 100644
> > > --- a/drivers/staging/media/zoran/zr36057.h
> > > +++ b/drivers/staging/media/zoran/zr36057.h
> > > @@ -30,13 +30,13 @@
> > > #define ZR36057_VFESPFR_HOR_DCM 14
> > > #define ZR36057_VFESPFR_VER_DCM 8
> > > #define ZR36057_VFESPFR_DISP_MODE 6
> > > -#define ZR36057_VFESPFR_YUV422 (0<<3)
> > > -#define ZR36057_VFESPFR_RGB888 (1<<3)
> > > -#define ZR36057_VFESPFR_RGB565 (2<<3)
> > > -#define ZR36057_VFESPFR_RGB555 (3<<3)
> > > -#define ZR36057_VFESPFR_ERR_DIF (1<<2)
> > > -#define ZR36057_VFESPFR_PACK24 (1<<1)
> > > -#define ZR36057_VFESPFR_LITTLE_ENDIAN (1<<0)
> > > +#define ZR36057_VFESPFR_YUV422 (0 << 3)
> > > +#define ZR36057_VFESPFR_RGB888 (1 << 3)
> > > +#define ZR36057_VFESPFR_RGB565 (2 << 3)
> > > +#define ZR36057_VFESPFR_RGB555 (3 << 3)
> > > +#define ZR36057_VFESPFR_ERR_DIF (1 << 2)
> > > +#define ZR36057_VFESPFR_PACK24 (1 << 1)
> > > +#define ZR36057_VFESPFR_LITTLE_ENDIAN (1 << 0)
> > >
> > > #define ZR36057_VDTR 0x00c /* Video Display "Top" Register */
> > >
> > >
> >
> > I looked at that header and it is very messy.
> >
> > Can you make two new patches? The first aligns every nicely, e.g. this:
> >
> > #define ZR36057_VFEHCR 0x000 /* Video Front End, Horizontal Configuration Register */
> > #define ZR36057_VFEHCR_HS_POL BIT(30)
> > #define ZR36057_VFEHCR_H_START 10
> > #define ZR36057_VFEHCR_H_END 0
> > #define ZR36057_VFEHCR_HMASK 0x3ff
> >
> > should become:
> >
> > /* Video Front End, Horizontal Configuration Register */
> > #define ZR36057_VFEHCR 0x000
> > #define ZR36057_VFEHCR_HS_POL BIT(30)
> > #define ZR36057_VFEHCR_H_START 10
> > #define ZR36057_VFEHCR_H_END 0
> > #define ZR36057_VFEHCR_HMASK 0x3ff
> >
> > Same for all the other register blocks. Use tabs to do the alignment
> > instead of spaces, as is currently the case.
> >
> > The second patch can replace the (0<<3) etc. to BIT(0).
> >
> Then I guess only one new patch would be needed for proper alignment, am
> i right? I have to rename it as v2 or should send as a completely new
> patch?

v2 might reduce confusion.

julia

> > That would be a nice cleanup of this rather messy header.
> >
> > Thanks!
> >
> > Hans
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/YHCFsNZVGfjjyHDi%40kali.
>