Re: [PATCH v4] USB:ehci:fix Kunpeng920 ehci hardware problem

[Alan Stern]

On Fri, Apr 09, 2021 at 04:48:01PM +0800, Longfang Liu wrote:
> Kunpeng920's EHCI controller does not have SBRN register.
> Reading the SBRN register when the controller driver is
> initialized will get 0.
> 
> When rebooting the EHCI driver, ehci_shutdown() will be called.
> if the sbrn flag is 0, ehci_shutdown() will return directly.
> The sbrn flag being 0 will cause the EHCI interrupt signal to
> not be turned off after reboot. this interrupt that is not closed
> will cause an exception to the device sharing the interrupt.
> 
> Therefore, the EHCI controller of Kunpeng920 needs to skip
> the read operation of the SBRN register.
> 
> Signed-off-by: Longfang Liu <liulongfang@xxxxxxxxxx>
> ---

Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>

> Changes in v4:
> 	- Modify the code implementation.
> 
> Changes in v3:
> 	- Fix some code style issues.
> 	- Update struct name.
> 
> Changes in v2:
> 	- Fix some code style issues.
> 	- Update function name.
> 
>  drivers/usb/host/ehci-pci.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
> index 3c3820a..237a346 100644
> --- a/drivers/usb/host/ehci-pci.c
> +++ b/drivers/usb/host/ehci-pci.c
> @@ -291,6 +291,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
>  	if (pdev->vendor == PCI_VENDOR_ID_STMICRO
>  	    && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
>  		;	/* ConneXT has no sbrn register */
> +	else if (pdev->vendor == PCI_VENDOR_ID_HUAWEI
> +			 && pdev->device == 0xa239)
> +		;	/* HUAWEI Kunpeng920 USB EHCI has no sbrn register */
>  	else
>  		pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
>  
> -- 
> 2.8.1
>