Re: [v7,1/3] arm64: dts: mt8183: add thermal zone node

From: Daniel Lezcano
Date: Fri Apr 09 2021 - 04:10:08 EST


On 16/03/2021 08:01, Michael Kao wrote:
> From: "michael.kao" <michael.kao@xxxxxxxxxxxx>
>
> Add thermal zone node to Mediatek MT8183 dts file.
>
> Evaluate the thermal zone every 500ms while not cooling
> and every 100ms when passive cooling is performed.
>
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> Signed-off-by: Michael Kao <michael.kao@xxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 85 ++++++++++++++++++++++++
> 1 file changed, 85 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 5b782a4769e7..d3550af06408 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -657,6 +657,87 @@
> status = "disabled";
> };
>
> + thermal: thermal@1100b000 {
> + #thermal-sensor-cells = <1>;
> + compatible = "mediatek,mt8183-thermal";
> + reg = <0 0x1100b000 0 0x1000>;
> + clocks = <&infracfg CLK_INFRA_THERM>,
> + <&infracfg CLK_INFRA_AUXADC>;
> + clock-names = "therm", "auxadc";
> + resets = <&infracfg MT8183_INFRACFG_AO_THERM_SW_RST>;
> + interrupts = <0 76 IRQ_TYPE_LEVEL_LOW>;
> + mediatek,auxadc = <&auxadc>;
> + mediatek,apmixedsys = <&apmixedsys>;
> + nvmem-cells = <&thermal_calibration>;
> + nvmem-cell-names = "calibration-data";
> + };
> +
> + thermal-zones {
> + cpu_thermal: cpu_thermal {
> + polling-delay-passive = <100>;
> + polling-delay = <500>;
> + thermal-sensors = <&thermal 0>;
> + sustainable-power = <5000>;
> + };
> +
> + /* The tzts1 ~ tzts6 don't need to polling */
> + /* The tzts1 ~ tzts6 don't need to thermal throttle */
> +
> + tzts1: tzts1 {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&thermal 1>;
> + sustainable-power = <5000>;
> + trips {};
> + cooling-maps {};
> + };

What is the point of defining the sustainable power with no cooling
device associated ?



--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog