Re: [PATCH 1/1] arm64: dts: mt8183-kukui: Enable thermal Tboard

[Hsin-Yi Wang]

On Fri, Apr 9, 2021 at 3:12 PM Michael Kao <michael.kao@xxxxxxxxxxxx> wrote:
>
> Add Tboard thermal sensor settings.
>
> pull-up voltage: 1800 mv
> pull-up resistor: 75K
>
> Vsense = pull-up voltage * Rntc / ( pull-up resistor + Rntc )
> AuxIn = Vsense * 4096 / 1500
>
> TEST=boot kukui
>      check /sys/class/thermal/thermal_zone*/type
>      check /sys/class/thermal/thermal_zone*/temp
the TEST lines can be removed.

>
> Signed-off-by: Michael Kao <michael.kao@xxxxxxxxxxxx>
> Signed-off-by: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
> ---

Tested-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>

This removes following error:
[   10.882325] generic-adc-thermal thermal-sensor1: Thermal zone
sensor register failed: -19
[   10.911912] generic-adc-thermal thermal-sensor2: Thermal zone
sensor register failed: -19

>  arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 14 ++++++++++++++
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi       |  2 +-
>  2 files changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index bf2ad1294dd3..202acb542b12 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -801,6 +801,20 @@
>         status = "okay";
>  };
>
> +&thermal_zones {
> +       Tboard1 {
> +               polling-delay = <1000>; /* milliseconds */
> +               polling-delay-passive = <0>; /* milliseconds */
> +               thermal-sensors = <&tboard_thermistor1>;
> +       };
> +
> +       Tboard2 {
> +               polling-delay = <1000>; /* milliseconds */
> +               polling-delay-passive = <0>; /* milliseconds */
> +               thermal-sensors = <&tboard_thermistor2>;
> +       };
> +};
> +
>  &u3phy {
>         status = "okay";
>  };
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 1ad0a1d55d53..f0719dbef249 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -673,7 +673,7 @@
>                         nvmem-cell-names = "calibration-data";
>                 };
>
> -               thermal-zones {
> +               thermal_zones: thermal-zones {
>                         cpu_thermal: cpu_thermal {
>                                 polling-delay-passive = <100>;
>                                 polling-delay = <500>;
> --
> 2.18.0
>