Re: [PATCH v2 00/14] usb: dwc2: Fix Partial Power down issues.

[Artur Petrosyan]

Hi Greg,

On 4/8/2021 13:17, Artur Petrosyan wrote:
> Hi Greg,
> 
> On 4/8/2021 11:28, Artur Petrosyan wrote:
>> This patch set fixes and improves the Partial Power Down mode for
>> dwc2 core.
>> It adds support for the following cases
>>       1. Entering and exiting partial power down when a port is
>>          suspended, resumed, port reset is asserted.
>>       2. Exiting the partial power down mode before removing driver.
>>       3. Exiting partial power down in wakeup detected interrupt handler.
>>       4. Exiting from partial power down mode when connector ID.
>>          status changes to "connId B
>>
>> It updates and fixes the implementation of dwc2 entering and
>> exiting partial power down mode when the system (PC) is suspended.
>>
>> The patch set also improves the implementation of function handlers
>> for entering and exiting host or device partial power down.
>>
>> NOTE: This is the second patch set in the power saving mode fixes
>> series.
>> This patch set is part of multiple series and is continuation
>> of the "usb: dwc2: Fix and improve power saving modes" patch set.
>> (Patch set link: https://urldefense.com/v3/__https://marc.info/?l=linux-usb&m=160379622403975&w=2__;!!A4F2R9G_pg!IJ-Xl1ZwQU2kmqHB3ITyWyno9BgpWUsC647AqK7GIlgzJu9BzT6VN7jt--__fGdMtgWF69M$ ).
>> The patches that were included in the "usb: dwc2:
>> Fix and improve power saving modes" which was submitted
>> earlier was too large and needed to be split up into
>> smaller patch sets.
>>
>> Changes since V1:
>> No changes in the patches or the source code.
>> Sending the second version of the patch set because the first version
>> was not received by vger.kernel.org.
>>
>>
>>
>> Artur Petrosyan (14):
>>     usb: dwc2: Add device partial power down functions
>>     usb: dwc2: Add host partial power down functions
>>     usb: dwc2: Update enter and exit partial power down functions
>>     usb: dwc2: Add partial power down exit flow in wakeup intr.
>>     usb: dwc2: Update port suspend/resume function definitions.
>>     usb: dwc2: Add enter partial power down when port is suspended
>>     usb: dwc2: Add exit partial power down when port is resumed
>>     usb: dwc2: Add exit partial power down when port reset is asserted
>>     usb: dwc2: Add part. power down exit from
>>       dwc2_conn_id_status_change().
>>     usb: dwc2: Allow exit partial power down in urb enqueue
>>     usb: dwc2: Fix session request interrupt handler
>>     usb: dwc2: Update partial power down entering by system suspend
>>     usb: dwc2: Fix partial power down exiting by system resume
>>     usb: dwc2: Add exit partial power down before removing driver
>>
>>    drivers/usb/dwc2/core.c      | 113 ++-------
>>    drivers/usb/dwc2/core.h      |  27 ++-
>>    drivers/usb/dwc2/core_intr.c |  46 ++--
>>    drivers/usb/dwc2/gadget.c    | 148 ++++++++++-
>>    drivers/usb/dwc2/hcd.c       | 458 +++++++++++++++++++++++++----------
>>    drivers/usb/dwc2/hw.h        |   1 +
>>    drivers/usb/dwc2/platform.c  |  11 +-
>>    7 files changed, 558 insertions(+), 246 deletions(-)
>>
>>
>> base-commit: e9fcb07704fcef6fa6d0333fd2b3a62442eaf45b
>>
> 
> Re sending as a "v2" did not work :(.
> The patches are not in lore again.
> 
> Could the issue be with a comma in the end of To: or Cc: list?
> Let me remove the comma in the end of those lists and try sending as "v3".
> 
> Regards,
> Artur
> 

I just removed the comma in the end of those lists and resent the patch 
set as a "v3" and they are already seen in lore.
There is one strange thing though on lore. Some patch titles are not 
fully visible.

For sure the issue was comma in the end of To: or Cc: lists.
Not working example.
To: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>, 
linux-usb@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx,

Working example.
To: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>, 
linux-usb@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx

If the comma is at least in the end of one of those lists (To: or Cc:) 
vger.kernel.org mailing server will not accept them.

Regards,
Artur