Re: [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller
From: Campion Kang
Date: Fri Mar 19 2021 - 06:02:33 EST
Please check [Campion] text in below as my reply.
Sorry, due to the mail was rejected by vger.kernel.org as SPAM before
so I reply the mail late and had some test email before.
-----------------------------------------------------------------------------------------
Date: Tue, 9 Mar 2021 16:07:55 +0000
From: Lee Jones <lee.jones@xxxxxxxxxx>
On Mon, 18 Jan 2021, Campion Kang wrote:
> AHC1EC0 is the embedded controller driver for Advantech industrial
It would be nice to have the model number in the subject line.
[Campion] AHC1EC0 is its model name that used in Advantech device internal.
There is no external module name.
Drop "driver".
[Campion] OK
> products. This provides sub-devices such as hwmon and watchdog, and
> also
"HWMON and Watchdog"
> expose functions for sub-devices to read/write the value to embedded
"exposes"
> controller.
>
> Changed since V5:
> - Kconfig: add "AHC1EC0" string to clearly define the EC name
> - fix the code according to reviewer's suggestion
> - remove unnecessary header files
> - change the structure name to lower case, align with others
> naming
>
> Signed-off-by: Campion Kang <campion.kang@xxxxxxxxxxxxxxxx>
> ---
> drivers/mfd/Kconfig | 10 +
> drivers/mfd/Makefile | 2 +
> drivers/mfd/ahc1ec0.c | 808 ++++++++++++++++++++++++++++++++++++
> include/linux/mfd/ahc1ec0.h | 276 ++++++++++++
> 4 files changed, 1096 insertions(+)
> create mode 100644 drivers/mfd/ahc1ec0.c
> create mode 100644 include/linux/mfd/ahc1ec0.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index bdfce7b15621..7d5fb5c17d9a 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -2154,5 +2154,15 @@ config MFD_INTEL_M10_BMC
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_AHC1EC0
> + tristate "Advantech AHC1EC0 Embedded Controller Module"
Please remove "Module"
> + depends on X86
> + select MFD_CORE
> + help
> + This is the core function that for Advantech EC drivers. It
> + includes the sub-devices such as hwmon, watchdog, etc. And also
> + provides expose functions for sub-devices to read/write the value
> + to embedded controller.
"This provides core functionality for the Advantech AHC1EC0 Embedded
Controller (EC) along with registration for HWMON and Watchdog
sub-devices. It also provides read and write APIs for communication
with the EC."
[Campion] OK, thanks.
> endmenu
> endif
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 14fdb188af02..a6af9d8825f4 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -268,3 +268,5 @@ obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
> obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
> obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
> obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
> +
You don't need to space this out.
> +obj-$(CONFIG_MFD_AHC1EC0) += ahc1ec0.o
> diff --git a/drivers/mfd/ahc1ec0.c b/drivers/mfd/ahc1ec0.c
> new file mode 100644
> index 000000000000..015f4307a54e
> --- /dev/null
> +++ b/drivers/mfd/ahc1ec0.c
> @@ -0,0 +1,808 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Advantech embedded controller core driver AHC1EC0
Advantech AHC1EC0 Embedded Controller
> + * Copyright 2020 Advantech IIoT Group
This is out of date.
> + *
Drop this '\n' please.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/delay.h>
> +#include <linux/dmi.h>
> +#include <linux/errno.h>
> +#include <linux/mfd/ahc1ec0.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +
> +#define DRV_NAME "ahc1ec0"
Please don't do this. Just use the string in-place.
> +enum {
> + ADVEC_SUBDEV_BRIGHTNESS = 0,
> + ADVEC_SUBDEV_EEPROM,
> + ADVEC_SUBDEV_GPIO,
> + ADVEC_SUBDEV_HWMON,
> + ADVEC_SUBDEV_LED,
> + ADVEC_SUBDEV_WDT,
> + ADVEC_SUBDEV_MAX,
> +};
Are these arbitrary?
[Campion] cannot arbitrary there, due to it is a index to identify its number of sub device.
> +/* Wait IBF (Input Buffer Full) clear */
> +static int ec_wait_write(void)
> +{
> + int i;
> +
> + for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
> + if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_IBF) == 0)
> + return 0;
> +
> + udelay(EC_RETRY_UDELAY);
> + }
> +
> + return -ETIMEDOUT;
> +}
>
> +/* Wait OBF (Output Buffer Full) data ready */
> +static int ec_wait_read(void)
> +{
> + int i;
> +
> + for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
> + if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_OBF) != 0)
> + return 0;
> +
> + udelay(EC_RETRY_UDELAY);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +/* Read data from EC HW RAM, the process is the following:
> + * Step 0. Wait IBF clear to send command
> + * Step 1. Send read command to EC command port
> + * Step 2. Wait IBF clear that means command is got by EC
> + * Step 3. Send read address to EC data port
> + * Step 4. Wait OBF data ready
> + * Step 5. Get data from EC data port
> + */
> +int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char *data)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_HW_RAM_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + *data = inb(EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> +
> + return ret;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
EXPORT?
[Campion] Yes, thanks.
> +/* Write data to EC HW RAM
> + * Step 0. Wait IBF clear to send command
> + * Step 1. Send write command to EC command port
> + * Step 2. Wait IBF clear that means command is got by EC
> + * Step 3. Send write address to EC data port
> + * Step 4. Wait IBF clear that means command is got by EC
> + * Step 5. Send data to EC data port
> + */
> +int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char data)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_HW_RAM_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(data, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> +
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(write_hw_ram);
If you're going to export these, they should be in their own
namespace.
[Campion] Yes, i will rename it to ahc1ec_write_hw_ram().
> +/* Get dynamic control table */
> +static int adv_get_dynamic_tab(struct adv_ec_platform_data *adv_ec_data)
> +{
> + int i, ret;
> + unsigned char pin_tmp, device_id;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + for (i = 0; i < EC_MAX_TBL_NUM; i++) {
> + adv_ec_data->dym_tbl[i].device_id = 0xff;
> + adv_ec_data->dym_tbl[i].hw_pin_num = 0xff;
> + }
> +
> + for (i = 0; i < EC_MAX_TBL_NUM; i++) {
> + ret = ec_wait_write();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
> + __LINE__);
Please remove all of this debug code.
[Campion] OK.
> + goto error;
> + }
> + outb(EC_TBL_WRITE_ITEM, EC_COMMAND_PORT);
More basic commentary is required throughout I think.
[Campion] OK.
> + ret = ec_wait_write();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + outb(i, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> +
> + /*
> + * If item is defined, EC will return item number.
> + * If table item is not defined, EC will return 0xFF.
> + */
> + pin_tmp = inb(EC_STATUS_PORT);
> + if (pin_tmp == 0xff) {
Please define all magic numbers.
[Campion] OK
> + dev_dbg(adv_ec_data->dev, "%s: inb(EC_STATUS_PORT)=0x%02x != 0xff.\n",
> + __func__, pin_tmp);
> + goto pass;
> + }
> +
> + ret = ec_wait_write();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + outb(EC_TBL_GET_PIN, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + pin_tmp = inb(EC_STATUS_PORT) & 0xff;
> + if (pin_tmp == 0xff) {
> + dev_dbg(adv_ec_data->dev, "%s: pin_tmp(0x%02X). line: %d\n", __func__,
> + pin_tmp, __LINE__);
> + goto pass;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_TBL_GET_DEVID, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + device_id = inb(EC_STATUS_PORT) & 0xff;
> +
> + dev_dbg(adv_ec_data->dev, "%s: device_id=0x%02X. line: %d\n", __func__,
> + device_id, __LINE__);
> +
> + adv_ec_data->dym_tbl[i].device_id = device_id;
> + adv_ec_data->dym_tbl[i].hw_pin_num = pin_tmp;
> + }
> +
> +pass:
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> + __func__, __LINE__);
Remove all _func_ and _LINE_ info. It's seldom helpful.
[Campion] OK.
> + return ret;
> +}
> +
> +int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
What is 'ad'?
[Campion] it is for ADC. I will rename it to 'adc' that more clear.
> + unsigned char multi)
> +{
> + int ret;
> + u32 ret_val;
> + unsigned int LSB, MSB;
> +
> + mutex_lock(&adv_ec_data->lock);
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_AD_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(hwpin, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_AD_LSB_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + LSB = inb(EC_STATUS_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_AD_MSB_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + MSB = inb(EC_STATUS_PORT);
> + ret_val = ((MSB << 8) | LSB) & 0x03FF;
> + ret_val = ret_val * multi * 100;
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return ret_val;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
dev_err()
[Campion] OK.
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(read_ad_value);
> +
> +int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char *pvalue)
> +{
> + int ret;
> + unsigned char value;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_ACPI_RAM_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + value = inb(EC_STATUS_PORT);
> + *pvalue = value;
> +
> + mutex_unlock(&adv_ec_data->lock);
> +
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(read_acpi_value);
Namespace.
[Campion] OK, rename to 'ahc1ec_read_acpi_value'
> +int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char value)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_ACPI_DATA_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(value, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
EXPORT?
I think this API (i.e. all of the functions above) should be moved
into drivers/platform. They really don't have a place in MFD.
[Campion] this is a common function for upper HWMON and brightness control used.
So far this API only used by HWMON, but then it will be used by
brightness in next stage. So i put this API here, OK?
> +int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue)
> +{
> + int ret;
> +
> + unsigned char gpio_status_value;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
> + mutex_unlock(&adv_ec_data->lock);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_STATUS_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + gpio_status_value = inb(EC_STATUS_PORT);
> +
> + *pvalue = gpio_status_value;
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> + return ret;
> +}
> +
> +int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_STATUS_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(value, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +
> +int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue)
> +{
> + int ret;
> + unsigned char gpio_dir_value;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
> + __LINE__);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_DIR_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + gpio_dir_value = inb(EC_STATUS_PORT);
> + *pvalue = gpio_dir_value;
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +
> +int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + dev_warn(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
> + __LINE__);
> +
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_DIR_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(value, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
All of the GPIO functions above should move into drivers/gpio.
[Campion] Due to it has a flow need to cowork with EC chip and firmware, it cannot be interrupt
by other functions. So it needs to keep in here.
> +int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(data, EC_COMMAND_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(write_hwram_command);
> +
> +static int adv_ec_get_productname(struct adv_ec_platform_data *adv_ec_data, char *product)
> +{
> + const char *vendor, *device;
> + int length = 0;
> +
> + /* Check it is Advantech board */
> + vendor = dmi_get_system_info(DMI_SYS_VENDOR);
> + if (memcmp(vendor, "Advantech", sizeof("Advantech")) != 0)
> + return -ENODEV;
> +
> + /* Get product model name */
> + device = dmi_get_system_info(DMI_PRODUCT_NAME);
> + if (device) {
> + while ((device[length] != ' ')
> + && (length < AMI_ADVANTECH_BOARD_ID_LENGTH))
> + length++;
> + memset(product, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
> + memmove(product, device, length);
> +
> + dev_info(adv_ec_data->dev, "BIOS Product Name = %s\n", product);
> +
> + return 0;
> + }
> +
> + dev_warn(adv_ec_data->dev, "This device is not Advantech Board (%s)!\n", product);
> +
> + return -ENODEV;
> +}
These should go into drivers/platform.
[Campion] This is a simple function to get module name from BIOS DMI table, it is not need to
access EC chip. But it can get once and other drivers can get this information,
donot call DMI every time. Can it keep in here?
> +static const struct mfd_cell adv_ec_sub_cells[] = {
> + { .name = "adv-ec-brightness", },
> + { .name = "adv-ec-eeprom", },
> + { .name = "adv-ec-gpio", },
> + { .name = "ahc1ec0-hwmon", },
> + { .name = "adv-ec-led", },
> + { .name = "ahc1ec0-wdt", },
> +};
> +
> +static int adv_ec_init_ec_data(struct adv_ec_platform_data *adv_ec_data)
> +{
> + int ret;
> +
> + adv_ec_data->sub_dev_mask = 0;
> + adv_ec_data->sub_dev_nb = 0;
> + adv_ec_data->dym_tbl = NULL;
> + adv_ec_data->bios_product_name = NULL;
Why are pre-initialising these?
[Campion] Just make sure they have empty pointer, but I will remove it.
> + mutex_init(&adv_ec_data->lock);
> +
> + /* Get product name */
> + adv_ec_data->bios_product_name =
> + devm_kzalloc(adv_ec_data->dev, AMI_ADVANTECH_BOARD_ID_LENGTH, GFP_KERNEL);
> + if (!adv_ec_data->bios_product_name)
> + return -ENOMEM;
> +
> + memset(adv_ec_data->bios_product_name, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
Why are you doing this?
[Campion] Just make sure the memory is null all
> + ret = adv_ec_get_productname(adv_ec_data, adv_ec_data->bios_product_name);
> + if (ret)
> + return ret;
> +
> + /* Get pin table */
> + adv_ec_data->dym_tbl = devm_kzalloc(adv_ec_data->dev,
> + EC_MAX_TBL_NUM * sizeof(struct ec_dynamic_table),
> + GFP_KERNEL);
> + if (!adv_ec_data->dym_tbl)
> + return -ENOMEM;
What does a dynamic table do?
[Campion] The dynamic table is reterived from EC firmware according to different platform HW device.
it will based on dynamic table information to get HW pin definition based on its function.
The pin value will retrive to calcute the value, for example, voltage value, vcore value.
> + ret = adv_get_dynamic_tab(adv_ec_data);
return adv_get_dynamic_tab();
[Campion] OK
> + return ret;
> +}
> +
> +static int adv_ec_parse_prop(struct adv_ec_platform_data *adv_ec_data)
> +{
> + int i, ret;
> + u32 nb, sub_dev[ADVEC_SUBDEV_MAX];
> +
> + ret = device_property_read_u32(adv_ec_data->dev, "advantech,sub-dev-nb", &nb);
Indexing devices is generally not a good strategy.
---------------------------------------------------------------------------
[Campion] Yes, I will remove it, just use the following that defined in ahc1ec0.yaml.
I ever feedback related mail for "https://lore.kernel.org/linux-watchdog/20210118123749.4769-6-campion.kang@xxxxxxxxxxxxxxxx/t/#m5126adbc2453e3ab3e6bda717c257fab364b9f45";.
But vger.kernel.org returned the mail to mail as spam mail.
I will modity it as the following, is it OK?
examples:
- |
#include <dt-bindings/mfd/ahc1ec0-dt.h>
ahc1ec0 {
compatible = "advantech,ahc1ec0";
advantech,hwmon-profile = <AHC1EC0_HWMON_PRO_UNO2271G>;
advantech,watchdog = true;
};
----------------------------------------------------------------------------
> + if (ret < 0) {
> + dev_err(adv_ec_data->dev, "get sub-dev-nb failed! (%d)\n", ret);
> + return ret;
> + }
> + adv_ec_data->sub_dev_nb = nb;
'nb' is not a good choice for a variable name.
[Campion] I will remove it.
> + ret = device_property_read_u32_array(adv_ec_data->dev, "advantech,sub-dev",
> + sub_dev, nb);
> + if (ret < 0) {
Is '> 0' valid?
[Campion] It will be remove it.
> + dev_err(adv_ec_data->dev, "get sub-dev failed! (%d)\n", ret);
Please use proper error messages.
"Failed to read 'advantech,sub-dev' property"
[Campion] It will be removed according the above changed.
> + return ret;
> + }
> +
> + for (i = 0; i < nb; i++) {
> + switch (sub_dev[i]) {
> + case ADVEC_SUBDEV_BRIGHTNESS:
> + case ADVEC_SUBDEV_EEPROM:
> + case ADVEC_SUBDEV_GPIO:
> + case ADVEC_SUBDEV_HWMON:
> + case ADVEC_SUBDEV_LED:
> + case ADVEC_SUBDEV_WDT:
> + adv_ec_data->sub_dev_mask |= BIT(sub_dev[i]);
> + break;
> + default:
> + dev_err(adv_ec_data->dev, "invalid prop value(%d)!\n",
> + sub_dev[i]);
> + }
> + }
> + dev_info(adv_ec_data->dev, "sub-dev mask = 0x%x\n", adv_ec_data->sub_dev_mask);
> +
> + return 0;
> +}
> +
> +static int adv_ec_probe(struct platform_device *pdev)
> +{
> + int ret, i;
> + struct device *dev = &pdev->dev;
> + struct adv_ec_platform_data *adv_ec_data;
This is not platform data. This is driver data.
struct adv_ec_ddata *ddata;
[Campion] OK, I modified it.
> + adv_ec_data = devm_kzalloc(dev, sizeof(struct adv_ec_platform_data), GFP_KERNEL);
sizeof(*adv_ec_data)
[Campion] OK, also update ahc1ec0-wdt.c and ahc1ec0-hwmon.c.
> + if (!adv_ec_data)
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, adv_ec_data);
> + adv_ec_data->dev = dev;
> +
> + ret = adv_ec_init_ec_data(adv_ec_data);
> + if (ret)
> + goto err_init_data;
> +
> + ret = adv_ec_parse_prop(adv_ec_data);
> + if (ret)
> + goto err_prop;
> +
> + /* check whether this EC has the following subdevices. */
> + for (i = 0; i < ARRAY_SIZE(adv_ec_sub_cells); i++) {
> + if (adv_ec_data->sub_dev_mask & BIT(i)) {
> + ret = mfd_add_hotplug_devices(dev, &adv_ec_sub_cells[i], 1);
Why have you chosen to use hotplug here?
[Campion] There is a information in BIOS ACPI table according to different device to decide
which function drivers need to be probe. May be a device has HWMON, it will dynamic
to load HWMON driver, but other device may not.
> + dev_info(adv_ec_data->dev, "mfd_add_hotplug_devices[%d] %s\n", i,
> + adv_ec_sub_cells[i].name);
> + if (ret)
> + dev_err(dev, "failed to add %s subdevice: %d\n",
> + adv_ec_sub_cells[i].name, ret);
> + }
> + }
This is a mess!
Where are you pulling these devices from?
[Campion] decide which drivers need to mount from BIOS ACPI table. This drive would built in Linux Kernel.
I am not sure what's your meaning, can you describe more? Thank you
> + dev_info(adv_ec_data->dev, "Advantech EC probe done");
> +
> + return 0;
> +
> +err_prop:
> + dev_err(dev, "failed to probe\n");
> +
> +err_init_data:
> + mutex_destroy(&adv_ec_data->lock);
> +
> + dev_err(dev, "failed to init data\n");
You don't need 2 error messages in the error path.
[Campion] OK, remove one.
> + return ret;
> +}
> +
> +static int adv_ec_remove(struct platform_device *pdev)
> +{
> + struct adv_ec_platform_data *adv_ec_data;
> +
> + adv_ec_data = dev_get_drvdata(&pdev->dev);
> +
> + mutex_destroy(&adv_ec_data->lock);
> +
> + mfd_remove_devices(&pdev->dev);
If you don't use the hotplug variant, you can use devm_* and omit
this.
[Campion] got it.
> + return 0;
> +}
> +
> +static const struct of_device_id adv_ec_of_match[] __maybe_unused = {
> + {
> + .compatible = "advantech,ahc1ec0",
> + },
Put this on one line please.
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, adv_ec_of_match);
> +
> +static const struct acpi_device_id adv_ec_acpi_match[] __maybe_unused = {
> + {"AHC1EC0", 0},
Spaces inside the '{' and '}' please.
> + {},
',' here, but not on the one above. Please be consistent.
> +};
> +MODULE_DEVICE_TABLE(acpi, adv_ec_acpi_match);
> +
> +static struct platform_driver adv_ec_driver = {
> + .driver = {
> + .name = DRV_NAME,
> + .of_match_table = of_match_ptr(adv_ec_of_match),
> + .acpi_match_table = ACPI_PTR(adv_ec_acpi_match),
> + },
> + .probe = adv_ec_probe,
> + .remove = adv_ec_remove,
> +};
> +module_platform_driver(adv_ec_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:" DRV_NAME);
> +MODULE_DESCRIPTION("Advantech Embedded Controller core driver.");
Name as in the header.
> +MODULE_AUTHOR("Campion Kang <campion.kang@xxxxxxxxxxxxxxxx>");
> +MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@xxxxxxxxxxxxxxxx>");
> +MODULE_VERSION("1.0");
Is this used?
[Campion] Yes, it is used. AceLan whom is Canonical Kernel RD was test this drivers for Advantech UNO device on Ubuntu Kernel.
> diff --git a/include/linux/mfd/ahc1ec0.h b/include/linux/mfd/ahc1ec0.h
> new file mode 100644
> index 000000000000..1b01e10c1fef
> --- /dev/null
> +++ b/include/linux/mfd/ahc1ec0.h
> @@ -0,0 +1,276 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +#ifndef __LINUX_MFD_AHC1EC0_H
> +#define __LINUX_MFD_AHC1EC0_H
> +
> +#include <linux/device.h>
> +
> +#define EC_COMMAND_PORT 0x29A /* EC I/O command port */
> +#define EC_STATUS_PORT 0x299 /* EC I/O data port */
> +
> +#define EC_RETRY_UDELAY 200 /* EC command retry delay in microseconds */
> +#define EC_MAX_TIMEOUT_COUNT 5000 /* EC command max retry count */
> +#define EC_COMMAND_BIT_OBF 0x01 /* Bit 0 is for OBF ready (Output buffer full) */
> +#define EC_COMMAND_BIT_IBF 0x02 /* Bit 1 is for IBF ready (Input buffer full) */
> +
> +/* Analog to digital converter command */
> +#define EC_AD_INDEX_WRITE 0x15 /* Write ADC port number into index */
> +#define EC_AD_LSB_READ 0x16 /* Read ADC LSB value from ADC port */
> +#define EC_AD_MSB_READ 0x1F /* Read ADC MSB value from ADC port */
> +
> +/* Voltage device ID */
> +#define EC_DID_SMBOEM0 0x28 /* SMBUS/I2C. Smbus channel 0 */
> +#define EC_DID_CMOSBAT 0x50 /* CMOS coin battery voltage */
> +#define EC_DID_CMOSBAT_X2 0x51 /* CMOS coin battery voltage*2 */
> +#define EC_DID_CMOSBAT_X10 0x52 /* CMOS coin battery voltage*10 */
> +#define EC_DID_5VS0 0x56 /* 5VS0 voltage */
> +#define EC_DID_5VS0_X2 0x57 /* 5VS0 voltage*2 */
> +#define EC_DID_5VS0_X10 0x58 /* 5VS0 voltage*10 */
> +#define EC_DID_5VS5 0x59 /* 5VS5 voltage */
> +#define EC_DID_5VS5_X2 0x5A /* 5VS5 voltage*2 */
> +#define EC_DID_5VS5_X10 0x5B /* 5VS5 voltage*10 */
> +#define EC_DID_12VS0 0x62 /* 12VS0 voltage */
> +#define EC_DID_12VS0_X2 0x63 /* 12VS0 voltage*2 */
> +#define EC_DID_12VS0_X10 0x64 /* 12VS0 voltage*10 */
> +#define EC_DID_VCOREA 0x65 /* CPU A core voltage */
> +#define EC_DID_VCOREA_X2 0x66 /* CPU A core voltage*2 */
> +#define EC_DID_VCOREA_X10 0x67 /* CPU A core voltage*10 */
> +#define EC_DID_VCOREB 0x68 /* CPU B core voltage */
> +#define EC_DID_VCOREB_X2 0x69 /* CPU B core voltage*2 */
> +#define EC_DID_VCOREB_X10 0x6A /* CPU B core voltage*10 */
> +#define EC_DID_DC 0x6B /* ADC. onboard voltage */
> +#define EC_DID_DC_X2 0x6C /* ADC. onboard voltage*2 */
> +#define EC_DID_DC_X10 0x6D /* ADC. onboard voltage*10 */
> +
> +/* Current device ID */
> +#define EC_DID_CURRENT 0x74
> +
> +/* ACPI commands */
> +#define EC_ACPI_RAM_READ 0x80
> +#define EC_ACPI_RAM_WRITE 0x81
> +
> +/*
> + * Dynamic control table commands
> + * The table includes HW pin number, Device ID, and Pin polarity
> + */
> +#define EC_TBL_WRITE_ITEM 0x20
> +#define EC_TBL_GET_PIN 0x21
> +#define EC_TBL_GET_DEVID 0x22
> +#define EC_MAX_TBL_NUM 32
> +
> +/* LED Device ID table */
> +#define EC_DID_LED_RUN 0xE1
> +#define EC_DID_LED_ERR 0xE2
> +#define EC_DID_LED_SYS_RECOVERY 0xE3
> +#define EC_DID_LED_D105_G 0xE4
> +#define EC_DID_LED_D106_G 0xE5
> +#define EC_DID_LED_D107_G 0xE6
> +
> +/* LED control HW RAM address 0xA0-0xAF */
> +#define EC_HWRAM_LED_BASE_ADDR 0xA0
> +#define EC_HWRAM_LED_PIN(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N))) // N:0-3
> +#define EC_HWRAM_LED_CTRL_HIBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 1)
> +#define EC_HWRAM_LED_CTRL_LOBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 2)
> +#define EC_HWRAM_LED_DEVICE_ID(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 3)
> +
> +/* LED control bit */
> +#define LED_CTRL_ENABLE_BIT() BIT(4)
> +#define LED_CTRL_INTCTL_BIT() BIT(5)
> +#define LED_CTRL_LEDBIT_MASK (0x03FF << 6)
> +#define LED_CTRL_POLARITY_MASK (0x000F << 0)
> +#define LED_CTRL_INTCTL_EXTERNAL 0
> +#define LED_CTRL_INTCTL_INTERNAL 1
> +
> +#define LED_DISABLE 0x0
> +#define LED_ON 0x1
> +#define LED_FAST 0x3
> +#define LED_NORMAL 0x5
> +#define LED_SLOW 0x7
> +#define LED_MANUAL 0xF
> +
> +#define LED_CTRL_LEDBIT_DISABLE 0x0000
> +#define LED_CTRL_LEDBIT_ON 0x03FF
> +#define LED_CTRL_LEDBIT_FAST 0x02AA
> +#define LED_CTRL_LEDBIT_NORMAL 0x0333
> +#define LED_CTRL_LEDBIT_SLOW 0x03E0
> +
> +/* Get the device name */
> +#define AMI_ADVANTECH_BOARD_ID_LENGTH 32
> +
> +/*
> + * Advantech Embedded Controller watchdog commands
> + * EC can send multi-stage watchdog event. System can setup watchdog event
> + * independently to make up event sequence.
> + */
> +#define EC_COMMANS_PORT_IBF_MASK 0x02
> +#define EC_RESET_EVENT 0x04
> +#define EC_WDT_START 0x28
> +#define EC_WDT_STOP 0x29
> +#define EC_WDT_RESET 0x2A
> +#define EC_WDT_BOOTTMEWDT_STOP 0x2B
> +
> +#define EC_HW_RAM 0x89
> +
> +#define EC_EVENT_FLAG 0x57
> +#define EC_ENABLE_DELAY_H 0x58
> +#define EC_ENABLE_DELAY_L 0x59
> +#define EC_POWER_BTN_TIME_H 0x5A
> +#define EC_POWER_BTN_TIME_L 0x5B
> +#define EC_RESET_DELAY_TIME_H 0x5E
> +#define EC_RESET_DELAY_TIME_L 0x5F
> +#define EC_PIN_DELAY_TIME_H 0x60
> +#define EC_PIN_DELAY_TIME_L 0x61
> +#define EC_SCI_DELAY_TIME_H 0x62
> +#define EC_SCI_DELAY_TIME_L 0x63
> +
> +/* EC ACPI commands */
> +#define EC_ACPI_DATA_READ 0x80
> +#define EC_ACPI_DATA_WRITE 0x81
> +
> +/* Brightness ACPI Addr */
> +#define BRIGHTNESS_ACPI_ADDR 0x50
> +
> +/* EC HW RAM commands */
> +#define EC_HW_EXTEND_RAM_READ 0x86
> +#define EC_HW_EXTEND_RAM_WRITE 0x87
> +#define EC_HW_RAM_READ 0x88
> +#define EC_HW_RAM_WRITE 0x89
> +
> +/* EC Smbus commands */
> +#define EC_SMBUS_CHANNEL_SET 0x8A /* Set selector number (SMBUS channel) */
> +#define EC_SMBUS_ENABLE_I2C 0x8C /* Enable channel I2C */
> +#define EC_SMBUS_DISABLE_I2C 0x8D /* Disable channel I2C */
> +
> +/* Smbus transmit protocol */
> +#define EC_SMBUS_PROTOCOL 0x00
> +
> +/* SMBUS status */
> +#define EC_SMBUS_STATUS 0x01
> +
> +/* SMBUS device slave address (bit0 must be 0) */
> +#define EC_SMBUS_SLV_ADDR 0x02
> +
> +/* SMBUS device command */
> +#define EC_SMBUS_CMD 0x03
> +
> +/* 0x04-0x24 Data In read process, return data are stored in this address */
> +#define EC_SMBUS_DATA 0x04
> +
> +#define EC_SMBUS_DAT_OFFSET(n) (EC_SMBUS_DATA + (n))
> +
> +/* SMBUS channel selector (0-4) */
> +#define EC_SMBUS_CHANNEL 0x2B
> +
> +/* EC SMBUS transmit Protocol code */
> +#define SMBUS_QUICK_WRITE 0x02 /* Write Quick Command */
> +#define SMBUS_QUICK_READ 0x03 /* Read Quick Command */
> +#define SMBUS_BYTE_SEND 0x04 /* Send Byte */
> +#define SMBUS_BYTE_RECEIVE 0x05 /* Receive Byte */
> +#define SMBUS_BYTE_WRITE 0x06 /* Write Byte */
> +#define SMBUS_BYTE_READ 0x07 /* Read Byte */
> +#define SMBUS_WORD_WRITE 0x08 /* Write Word */
> +#define SMBUS_WORD_READ 0x09 /* Read Word */
> +#define SMBUS_BLOCK_WRITE 0x0A /* Write Block */
> +#define SMBUS_BLOCK_READ 0x0B /* Read Block */
> +#define SMBUS_PROC_CALL 0x0C /* Process Call */
> +#define SMBUS_BLOCK_PROC_CALL 0x0D /* Write Block-Read Block Process Call */
> +#define SMBUS_I2C_READ_WRITE 0x0E /* I2C block Read-Write */
> +#define SMBUS_I2C_WRITE_READ 0x0F /* I2C block Write-Read */
> +
> +/* GPIO control commands */
> +#define EC_GPIO_INDEX_WRITE 0x10
> +#define EC_GPIO_STATUS_READ 0x11
> +#define EC_GPIO_STATUS_WRITE 0x12
> +#define EC_GPIO_DIR_READ 0x1D
> +#define EC_GPIO_DIR_WRITE 0x1E
> +
> +/* One Key Recovery commands */
> +#define EC_ONE_KEY_FLAG 0x9C
> +
> +/* ASG OEM commands */
> +#define EC_ASG_OEM 0xEA
> +#define EC_ASG_OEM_READ 0x00
> +#define EC_ASG_OEM_WRITE 0x01
> +#define EC_OEM_POWER_STATUS_VIN1 0X10
> +#define EC_OEM_POWER_STATUS_VIN2 0X11
> +#define EC_OEM_POWER_STATUS_BAT1 0X12
> +#define EC_OEM_POWER_STATUS_BAT2 0X13
> +
> +/* GPIO DEVICE ID */
> +#define EC_DID_ALTGPIO_0 0x10 /* 0x10 AltGpio0 User define gpio */
> +#define EC_DID_ALTGPIO_1 0x11 /* 0x11 AltGpio1 User define gpio */
> +#define EC_DID_ALTGPIO_2 0x12 /* 0x12 AltGpio2 User define gpio */
> +#define EC_DID_ALTGPIO_3 0x13 /* 0x13 AltGpio3 User define gpio */
> +#define EC_DID_ALTGPIO_4 0x14 /* 0x14 AltGpio4 User define gpio */
> +#define EC_DID_ALTGPIO_5 0x15 /* 0x15 AltGpio5 User define gpio */
> +#define EC_DID_ALTGPIO_6 0x16 /* 0x16 AltGpio6 User define gpio */
> +#define EC_DID_ALTGPIO_7 0x17 /* 0x17 AltGpio7 User define gpio */
> +
> +/* Lmsensor Chip Register */
> +#define NSLM96163_CHANNEL 0x02
> +
> +/* NS_LM96163 address 0x98 */
> +#define NSLM96163_ADDR 0x98
> +
> +/* LM96163 index(0x00) Local Temperature (Signed MSB) */
> +#define NSLM96163_LOC_TEMP 0x00
> +
> +/* HWMON registers */
> +#define INA266_REG_VOLTAGE 0x02 /* 1.25mV */
> +#define INA266_REG_POWER 0x03 /* 25mW */
> +#define INA266_REG_CURRENT 0x04 /* 1mA */
> +
> +struct ec_hw_pin_table {
> + unsigned int vbat[2];
> + unsigned int v5[2];
> + unsigned int v12[2];
> + unsigned int vcore[2];
> + unsigned int vdc[2];
> + unsigned int ec_current[2];
> + unsigned int power[2];
> +};
> +
> +struct ec_dynamic_table {
> + unsigned char device_id;
> + unsigned char hw_pin_num;
> +};
> +
> +struct ec_smbuso_em0 {
> + unsigned char hw_pin_num;
> +};
> +
> +struct pled_hw_pin_tbl {
> + unsigned int pled[6];
> +};
> +
> +struct adv_ec_platform_data {
> + char *bios_product_name;
Where is this used?
[Campion] Get the module name once and upper application can get it by EC driver.
> + int sub_dev_nb;
> + u32 sub_dev_mask;
> + struct mutex lock;
> + struct device *dev;
> + struct class *adv_ec_class;
> +
> + struct ec_dynamic_table *dym_tbl;
> +};
Check whether all of these really need to be in device data i.e. check
that they are all used in sub-devices.
[Campion] It seems donot use sub_dev_nb and sub_dev_mask in device data, i will remove it.
> +int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
> + unsigned char multi);
> +int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char *pvalue);
> +int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char value);
> +int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char *data);
> +int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char data);
> +int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data);
> +int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue);
> +int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value);
> +int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue);
> +int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value);
> +
> +#endif /* __LINUX_MFD_AHC1EC0_H */
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog