Re: [PATCH v2 1/1] PCI: pciehp: Skip DLLSC handling if DPC is triggered

[Sathyanarayanan Kuppuswamy Natarajan]

Hi,

On Wed, Mar 17, 2021 at 9:31 AM Dan Williams <dan.j.williams@xxxxxxxxx> wrote:
>
> On Tue, Mar 16, 2021 at 10:31 PM Lukas Wunner <lukas@xxxxxxxxx> wrote:
> >
> > On Tue, Mar 16, 2021 at 10:08:31PM -0700, Dan Williams wrote:
> > > On Tue, Mar 16, 2021 at 9:14 PM Lukas Wunner <lukas@xxxxxxxxx> wrote:
> > > >
> > > > On Fri, Mar 12, 2021 at 07:32:08PM -0800, sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx wrote:
> > > > > +     if ((events == PCI_EXP_SLTSTA_DLLSC) && is_dpc_reset_active(pdev)) {
> > > > > +             ctrl_info(ctrl, "Slot(%s): DLLSC event(DPC), skipped\n",
> > > > > +                       slot_name(ctrl));
> > > > > +             ret = IRQ_HANDLED;
> > > > > +             goto out;
> > > > > +     }
> > > >
> > > > Two problems here:
> > > >
> > > > (1) If recovery fails, the link will *remain* down, so there'll be
> > > >     no Link Up event.  You've filtered the Link Down event, thus the
> > > >     slot will remain in ON_STATE even though the device in the slot is
> > > >     no longer accessible.  That's not good, the slot should be brought
> > > >     down in this case.
> > >
> > > Can you elaborate on why that is "not good" from the end user
> > > perspective? From a driver perspective the device driver context is
> > > lost and the card needs servicing. The service event starts a new
> > > cycle of slot-attention being triggered and that syncs the slot-down
> > > state at that time.
> >
> > All of pciehp's code assumes that if the link is down, the slot must be
> > off.  A slot which is in ON_STATE for a prolonged period of time even
> > though the link is down is an oddity the code doesn't account for.
> >
> > If the link goes down, the slot should be brought into OFF_STATE.
> > (It's okay though to delay bringdown until DPC recovery has completed
> > unsuccessfully, which is what the patch I'm proposing does.)
> >
> > I don't understand what you mean by "service event".  Someone unplugging
> > and replugging the NVMe drive?
>
> Yes, service meaning a technician physically removes the card.
>
> >
> >
> > > > (2) If recovery succeeds, there's a race where pciehp may call
> > > >     is_dpc_reset_active() *after* dpc_reset_link() has finished.
> > > >     So both the DPC Trigger Status bit as well as pdev->dpc_reset_active
> > > >     will be cleared.  Thus, the Link Up event is not filtered by pciehp
> > > >     and the slot is brought down and back up even though DPC recovery
> > > >     was succesful, which seems undesirable.
> > >
> > > The hotplug driver never saw the Link Down, so what does it do when
> > > the slot transitions from Link Up to Link Up? Do you mean the Link
> > > Down might fire after the dpc recovery has completed if the hotplug
> > > notification was delayed?
> >
> > If the Link Down is filtered and the Link Up is not, pciehp will
> > bring down the slot and then bring it back up.  That's because pciehp
> > can't really tell whether a DLLSC event is Link Up or Link Down.
> >
> > It just knows that the link was previously up, is now up again,
> > but must have been down intermittently, so transactions to the
> > device in the slot may have been lost and the slot is therefore
> > brought down for safety.  Because the link is up, it is then
> > brought back up.
>
> I wonder why we're not seeing that effect in testing?

In our test case, there is a good chance that the LINK UP event is also
filtered. We change the dpc_reset_active status only after we verify
the link is up. So if hotplug handler handles the LINK UP event before
we change the status of dpc_reset_active, then it will not lead to the
issue mentioned by Lukas.

        if (!pcie_wait_for_link(pdev, true)) {
                pci_info(pdev, "Data Link Layer Link Active not set in
1000 msec\n");
-               return PCI_ERS_RESULT_DISCONNECT;
+               status = PCI_ERS_RESULT_DISCONNECT;
        }

-       return PCI_ERS_RESULT_RECOVERED;
+       atomic_dec_return_release(&pdev->dpc_reset_active);

-- 
Sathyanarayanan Kuppuswamy
Linux Kernel Developer