[PATCH] dt-bindings: spi: Convert Freescale DSPI to json schema
From: Kuldeep Singh
Date: Mon Mar 15 2021 - 08:16:42 EST
Convert the Freescale DSPI binding to DT schema format using json-schema.
Signed-off-by: Kuldeep Singh <kuldeep.singh@xxxxxxx>
---
Hi Rob,
This patch is checked with following commands with no warnings observed.
make distclean; make allmodconfig;
make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml;
make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml
.../bindings/spi/fsl,spi-fsl-dspi.yaml | 131 ++++++++++++++++++
.../devicetree/bindings/spi/spi-fsl-dspi.txt | 65 ---------
MAINTAINERS | 2 +-
3 files changed, 132 insertions(+), 66 deletions(-)
create mode 100644 Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml
delete mode 100644 Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
diff --git a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml
new file mode 100644
index 000000000000..15ffc83bdba6
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/fsl,spi-fsl-dspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale DSPI Controller
+
+maintainers:
+ - Vladimir Oltean <olteanv@xxxxxxxxx>
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,vf610-dspi
+ - fsl,ls1021a-v1.0-dspi
+ - fsl,ls1028a-dspi
+ - fsl,ls2085a-dspi
+ - fsl,lx2160a-dspi
+ - items:
+ - enum:
+ - fsl,ls1012a-dspi
+ - fsl,ls1028a-dspi
+ - fsl,ls1043a-dspi
+ - fsl,ls1046a-dspi
+ - fsl,ls1088a-dspi
+ - const: fsl,ls1021a-v1.0-dspi
+ - items:
+ - enum:
+ - fsl,ls2080a-dspi
+ - fsl,lx2160a-dspi
+ - const: fsl,ls2085a-dspi
+
+ reg:
+ maxItems: 1
+ description: Offset and length of registers
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: SoC dspi clock
+
+ clock-names:
+ items:
+ - const: dspi
+
+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ description:
+ Names for the pin configuration must be "default"
+
+ dmas:
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ spi-num-chipselects:
+ maxItems: 1
+ description: Number of the chipselect signals
+
+ bus-num:
+ items:
+ - description: Slave chip chipselect signal number
+
+patternProperties:
+ "@[0-9a-f]+":
+ type: object
+
+ properties:
+ fsl,spi-cs-sck-delay:
+ description:
+ Delay in nanoseconds between activating chip select and the start of
+ clock signal, at the start of a transfer.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ fsl,spi-sck-cs-delay:
+ description:
+ Delay in nanoseconds between stopping the clock signal and
+ deactivating chip select, at the end of a transfer.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - spi-num-chipselects
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ spi@2100000 {
+ compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dspi";
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>;
+ dmas = <&edma0 0 62>, <&edma0 0 60>;
+ dma-names = "tx", "rx";
+ spi-num-chipselects = <4>;
+ little-endian;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <10000000>;
+ reg = <0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
deleted file mode 100644
index 30a79da9c039..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-ARM Freescale DSPI controller
-
-Required properties:
-- compatible : must be one of:
- "fsl,vf610-dspi",
- "fsl,ls1021a-v1.0-dspi",
- "fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
- "fsl,ls1028a-dspi",
- "fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
- "fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
- "fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
- "fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"),
- "fsl,ls2085a-dspi",
- "fsl,lx2160a-dspi",
-- reg : Offset and length of the register set for the device
-- interrupts : Should contain SPI controller interrupt
-- clocks: from common clock binding: handle to dspi clock.
-- clock-names: from common clock binding: Shall be "dspi".
-- pinctrl-0: pin control group to be used for this controller.
-- pinctrl-names: must contain a "default" entry.
-- spi-num-chipselects : the number of the chipselect signals.
-
-Optional property:
-- big-endian: If present the dspi device's registers are implemented
- in big endian mode.
-- bus-num : the slave chip chipselect signal number.
-
-Optional SPI slave node properties:
-- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip
- select and the start of clock signal, at the start of a transfer.
-- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock
- signal and deactivating chip select, at the end of a transfer.
-
-Example:
-
-dspi0@4002c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,vf610-dspi";
- reg = <0x4002c000 0x1000>;
- interrupts = <0 67 0x04>;
- clocks = <&clks VF610_CLK_DSPI0>;
- clock-names = "dspi";
- spi-num-chipselects = <5>;
- bus-num = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_dspi0_1>;
- big-endian;
-
- sflash: at26df081a@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "atmel,at26df081a";
- spi-max-frequency = <16000000>;
- spi-cpol;
- spi-cpha;
- reg = <0>;
- linux,modalias = "m25p80";
- modal = "at26df081a";
- fsl,spi-cs-sck-delay = <100>;
- fsl,spi-sck-cs-delay = <50>;
- };
-};
-
-
diff --git a/MAINTAINERS b/MAINTAINERS
index d92f85ca831d..e2c5b7367db9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7060,7 +7060,7 @@ FREESCALE DSPI DRIVER
M: Vladimir Oltean <olteanv@xxxxxxxxx>
L: linux-spi@xxxxxxxxxxxxxxx
S: Maintained
-F: Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+F: Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml
F: drivers/spi/spi-fsl-dspi.c
F: include/linux/spi/spi-fsl-dspi.h
--
2.17.1