[PATCH] Bluetooth: hci_h5: btrtl: Add quirk for keep power during suspend/resume for specific devices

From: hildawu
Date: Mon Mar 15 2021 - 04:59:49 EST


From: hildawu <hildawu@xxxxxxxxxxx>

RTL8822C devices support BT wakeup Host. Add a quirk for these specific
devices did not power off during suspend and resume.
By this change, if the Host support that received BT device signal then
it can be wakeup.

Signed-off-by: hildawu <hildawu@xxxxxxxxxxx>
---
drivers/bluetooth/btrtl.c | 36 ------------------------------------
drivers/bluetooth/btrtl.h | 35 +++++++++++++++++++++++++++++++++++
drivers/bluetooth/hci_h5.c | 35 ++++++++++++++++++++++++-----------
include/net/bluetooth/hci.h | 9 +++++++++
4 files changed, 68 insertions(+), 47 deletions(-)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index e7fe5fb22753..94d1e7885aee 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -38,42 +38,6 @@
.hci_ver = (hciv), \
.hci_bus = (bus)

-enum btrtl_chip_id {
- CHIP_ID_8723A,
- CHIP_ID_8723B,
- CHIP_ID_8821A,
- CHIP_ID_8761A,
- CHIP_ID_8822B = 8,
- CHIP_ID_8723D,
- CHIP_ID_8821C,
- CHIP_ID_8822C = 13,
- CHIP_ID_8761B,
- CHIP_ID_8852A = 18,
-};
-
-struct id_table {
- __u16 match_flags;
- __u16 lmp_subver;
- __u16 hci_rev;
- __u8 hci_ver;
- __u8 hci_bus;
- bool config_needed;
- bool has_rom_version;
- char *fw_name;
- char *cfg_name;
-};
-
-struct btrtl_device_info {
- const struct id_table *ic_info;
- u8 rom_version;
- u8 *fw_data;
- int fw_len;
- u8 *cfg_data;
- int cfg_len;
- bool drop_fw;
- int project_id;
-};
-
static const struct id_table ic_id_table[] = {
/* 8723A */
{ IC_INFO(RTL_ROM_LMP_8723A, 0xb, 0x6, HCI_USB),
diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
index 2a582682136d..0fa38c116762 100644
--- a/drivers/bluetooth/btrtl.h
+++ b/drivers/bluetooth/btrtl.h
@@ -12,6 +12,41 @@
#define rtl_dev_info(dev, fmt, ...) bt_dev_info(dev, "RTL: " fmt, ##__VA_ARGS__)
#define rtl_dev_dbg(dev, fmt, ...) bt_dev_dbg(dev, "RTL: " fmt, ##__VA_ARGS__)

+enum btrtl_chip_id {
+ CHIP_ID_8723A,
+ CHIP_ID_8723B,
+ CHIP_ID_8821A,
+ CHIP_ID_8761A,
+ CHIP_ID_8822B = 8,
+ CHIP_ID_8723D,
+ CHIP_ID_8821C,
+ CHIP_ID_8822C = 13,
+ CHIP_ID_8761B,
+ CHIP_ID_8852A = 18,
+};
+
+struct id_table {
+ __u16 match_flags;
+ __u16 lmp_subver;
+ __u16 hci_rev;
+ __u8 hci_ver;
+ __u8 hci_bus;
+ bool config_needed;
+ bool has_rom_version;
+ char *fw_name;
+ char *cfg_name;
+};
+
+struct btrtl_device_info {
+ const struct id_table *ic_info;
+ u8 rom_version;
+ u8 *fw_data;
+ int fw_len;
+ u8 *cfg_data;
+ int cfg_len;
+ int project_id;
+};
+
struct btrtl_device_info;

struct rtl_download_cmd {
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 27e96681d583..1ca4ff89ea14 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -909,7 +909,15 @@ static int h5_btrtl_setup(struct h5 *h5)
/* Enable controller to do both LE scan and BR/EDR inquiry
* simultaneously.
*/
- set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks);
+ switch (btrtl_dev->project_id) {
+ case CHIP_ID_8822C:
+ case CHIP_ID_8852A:
+ set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks);
+ set_bit(HCI_QUIRK_DEVICES_WAKEUP_SUPPORTED, &h5->hu->hdev->quirks);
+ break;
+ default:
+ break;
+ }

out_free:
btrtl_free(btrtl_dev);
@@ -945,8 +953,11 @@ static void h5_btrtl_close(struct h5 *h5)
static int h5_btrtl_suspend(struct h5 *h5)
{
serdev_device_set_flow_control(h5->hu->serdev, false);
- gpiod_set_value_cansleep(h5->device_wake_gpio, 0);
- gpiod_set_value_cansleep(h5->enable_gpio, 0);
+
+ if (!test_bit(HCI_QUIRK_DEVICES_WAKEUP_SUPPORTED, &h5->hu->hdev->quirks)) {
+ gpiod_set_value_cansleep(h5->device_wake_gpio, 0);
+ gpiod_set_value_cansleep(h5->enable_gpio, 0);
+ }
return 0;
}

@@ -972,17 +983,19 @@ static void h5_btrtl_reprobe_worker(struct work_struct *work)

static int h5_btrtl_resume(struct h5 *h5)
{
- struct h5_btrtl_reprobe *reprobe;
+ if (!test_bit(HCI_QUIRK_DEVICES_WAKEUP_SUPPORTED, &h5->hu->hdev->quirks)) {
+ struct h5_btrtl_reprobe *reprobe;

- reprobe = kzalloc(sizeof(*reprobe), GFP_KERNEL);
- if (!reprobe)
- return -ENOMEM;
+ reprobe = kzalloc(sizeof(*reprobe), GFP_KERNEL);
+ if (!reprobe)
+ return -ENOMEM;

- __module_get(THIS_MODULE);
+ __module_get(THIS_MODULE);

- INIT_WORK(&reprobe->work, h5_btrtl_reprobe_worker);
- reprobe->dev = get_device(&h5->hu->serdev->dev);
- queue_work(system_long_wq, &reprobe->work);
+ INIT_WORK(&reprobe->work, h5_btrtl_reprobe_worker);
+ reprobe->dev = get_device(&h5->hu->serdev->dev);
+ queue_work(system_long_wq, &reprobe->work);
+ }
return 0;
}

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index ba2f439bc04d..2e88381b4a58 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -246,6 +246,15 @@ enum {
* HCI after resume.
*/
HCI_QUIRK_NO_SUSPEND_NOTIFIER,
+
+ /* When this quirk is set, the controller does not power off
+ * during suspend and resume. This mechanism lets BT devices wake
+ * the Host up if the Host and chips support.
+ *
+ * This quirk can be set before hci_register_dev is called or
+ * during the hdev->setup vendor callback.
+ */
+ HCI_QUIRK_DEVICES_WAKEUP_SUPPORTED,
};

/* HCI device flags */
--
2.17.1