Re: [PATCH net-next] net: stmmac: Set FIFO sizes for ipq806x

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (refs/heads/master):

On Sat, 13 Mar 2021 13:18:26 +0000 you wrote:
> Commit eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values")
> started using the TX FIFO size to verify what counts as a valid MTU
> request for the stmmac driver.  This is unset for the ipq806x variant.
> Looking at older patches for this it seems the RX + TXs buffers can be
> up to 8k, so set appropriately.
> 
> (I sent this as an RFC patch in June last year, but received no replies.
> I've been running with this on my hardware (a MikroTik RB3011) since
> then with larger MTUs to support both the internal qca8k switch and
> VLANs with no problems. Without the patch it's impossible to set the
> larger MTU required to support this.)
> 
> [...]

Here is the summary with links:
  - [net-next] net: stmmac: Set FIFO sizes for ipq806x
    https://git.kernel.org/netdev/net-next/c/e127906b68b4

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html