Re: [PATCH] arm64: dts: qcom: pm8150: Enable RTC

[Dmitry Baryshkov]

On Wed, 6 Jan 2021 at 03:09, Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> wrote:
>
> The PM8150 comes with everything the RTC needs, so let's just leave it
> enabled instead of having to explicitly enable it for all boards.
> In effect this patch enables the RTC on the SM8150 MTP and the SM8250
> HDK.

Acked-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/pm8150.dtsi     | 4 +---
>  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 4 ----
>  arch/arm64/boot/dts/qcom/sm8250-mtp.dts  | 4 ----
>  3 files changed, 1 insertion(+), 11 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
> index a53eccf2b695..027f55d53584 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
> @@ -97,13 +97,11 @@ die-temp@6 {
>                         };
>                 };
>
> -               pm8150_rtc: rtc@6000 {
> +               rtc@6000 {
>                         compatible = "qcom,pm8941-rtc";
>                         reg = <0x6000>;
>                         reg-names = "rtc", "alarm";
>                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
> -
> -                       status = "disabled";
>                 };
>
>                 pm8150_gpios: gpio@c000 {
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index d7799a6fb489..546b7fb9cf55 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -609,10 +609,6 @@ lt9611_rst_pin: lt9611-rst-pin {
>         };
>  };
>
> -&pm8150_rtc {
> -       status = "okay";
> -};
> -
>  &qupv3_id_0 {
>         status = "okay";
>  };
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> index 767a2e446248..c291422fa096 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> @@ -392,10 +392,6 @@ &i2c15 {
>         /* rtc6226 @ 64 */
>  };
>
> -&pm8150_rtc {
> -       status = "okay";
> -};
> -
>  &qupv3_id_0 {
>         status = "okay";
>  };
> --
> 2.29.2
>


-- 
With best wishes
Dmitry