[PATCH 2/2] objtool,x86: Use asm/nops.h

[Peter Zijlstra]

Since the kernel will rely on a single canonical set of NOPs, make
sure objtool uses the exact same ones.

Signed-off-by: Peter Zijlstra (Intel) <peterz@xxxxxxxxxxxxx>
---
 tools/arch/x86/include/asm/nops.h |   81 ++++++++++++++++++++++++++++++++++++++
 tools/objtool/arch/x86/decode.c   |   13 +++---
 tools/objtool/sync-check.sh       |    1 
 3 files changed, 90 insertions(+), 5 deletions(-)

--- /dev/null
+++ b/tools/arch/x86/include/asm/nops.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_NOPS_H
+#define _ASM_X86_NOPS_H
+
+/*
+ * Define nops for use with alternative() and for tracing.
+ */
+
+#ifndef CONFIG_64BIT
+
+/*
+ * Generic 32bit nops from GAS:
+ *
+ * 1: nop
+ * 2: movl %esi,%esi
+ * 3: leal 0x0(%esi),%esi
+ * 4: leal 0x0(%esi,%eiz,1),%esi
+ * 5: leal %ds:0x0(%esi,%eiz,1),%esi
+ * 6: leal 0x0(%esi),%esi
+ * 7: leal 0x0(%esi,%eiz,1),%esi
+ * 8: leal %ds:0x0(%esi,%eiz,1),%esi
+ *
+ * Except 5 and 8, which are DS prefixed 4 and 7 resp, where GAS would emit 2
+ * nop instructions.
+ */
+#define BYTES_NOP1	0x90
+#define BYTES_NOP2	0x89,0xf6
+#define BYTES_NOP3	0x8d,0x76,0x00
+#define BYTES_NOP4	0x8d,0x74,0x26,0x00
+#define BYTES_NOP5	0x3e,BYTES_NOP4
+#define BYTES_NOP6	0x8d,0xb6,0x00,0x00,0x00,0x00
+#define BYTES_NOP7	0x8d,0xb4,0x26,0x00,0x00,0x00,0x00
+#define BYTES_NOP8	0x3e,BYTES_NOP7
+
+#else
+
+/*
+ * Generic 64bit nops from GAS:
+ *
+ * 1: nop
+ * 2: osp nop
+ * 3: nopl (%eax)
+ * 4: nopl 0x00(%eax)
+ * 5: nopl 0x00(%eax,%eax,1)
+ * 6: osp nopl 0x00(%eax,%eax,1)
+ * 7: nopl 0x00000000(%eax)
+ * 8: nopl 0x00000000(%eax,%eax,1)
+ */
+#define BYTES_NOP1	0x90
+#define BYTES_NOP2	0x66,BYTES_NOP1
+#define BYTES_NOP3	0x0f,0x1f,0x00
+#define BYTES_NOP4	0x0f,0x1f,0x40,0x00
+#define BYTES_NOP5	0x0f,0x1f,0x44,0x00,0x00
+#define BYTES_NOP6	0x66,BYTES_NOP5
+#define BYTES_NOP7	0x0f,0x1f,0x80,0x00,0x00,0x00,0x00
+#define BYTES_NOP8	0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00
+
+#endif /* CONFIG_64BIT */
+
+#ifdef __ASSEMBLY__
+#define _ASM_MK_NOP(x) .byte x
+#else
+#define _ASM_MK_NOP(x) ".byte " __stringify(x) "\n"
+#endif
+
+#define ASM_NOP1 _ASM_MK_NOP(BYTES_NOP1)
+#define ASM_NOP2 _ASM_MK_NOP(BYTES_NOP2)
+#define ASM_NOP3 _ASM_MK_NOP(BYTES_NOP3)
+#define ASM_NOP4 _ASM_MK_NOP(BYTES_NOP4)
+#define ASM_NOP5 _ASM_MK_NOP(BYTES_NOP5)
+#define ASM_NOP6 _ASM_MK_NOP(BYTES_NOP6)
+#define ASM_NOP7 _ASM_MK_NOP(BYTES_NOP7)
+#define ASM_NOP8 _ASM_MK_NOP(BYTES_NOP8)
+
+#define ASM_NOP_MAX 8
+
+#ifndef __ASSEMBLY__
+extern const unsigned char * const x86_nops[];
+#endif
+
+#endif /* _ASM_X86_NOPS_H */
--- a/tools/objtool/arch/x86/decode.c
+++ b/tools/objtool/arch/x86/decode.c
@@ -11,6 +11,9 @@
 #include "../../../arch/x86/lib/inat.c"
 #include "../../../arch/x86/lib/insn.c"
 
+#define CONFIG_64BIT 1
+#include <asm/nops.h>
+
 #include <asm/orc_types.h>
 #include <objtool/check.h>
 #include <objtool/elf.h>
@@ -640,11 +643,11 @@ void arch_initial_func_cfi_state(struct
 const char *arch_nop_insn(int len)
 {
 	static const char nops[5][5] = {
-		/* 1 */ { 0x90 },
-		/* 2 */ { 0x66, 0x90 },
-		/* 3 */ { 0x0f, 0x1f, 0x00 },
-		/* 4 */ { 0x0f, 0x1f, 0x40, 0x00 },
-		/* 5 */ { 0x0f, 0x1f, 0x44, 0x00, 0x00 },
+		{ BYTES_NOP1 },
+		{ BYTES_NOP2 },
+		{ BYTES_NOP3 },
+		{ BYTES_NOP4 },
+		{ BYTES_NOP5 },
 	};
 
 	if (len < 1 || len > 5) {
--- a/tools/objtool/sync-check.sh
+++ b/tools/objtool/sync-check.sh
@@ -10,6 +10,7 @@ FILES="include/linux/objtool.h"
 
 if [ "$SRCARCH" = "x86" ]; then
 FILES="$FILES
+arch/x86/include/asm/nops.h
 arch/x86/include/asm/inat_types.h
 arch/x86/include/asm/orc_types.h
 arch/x86/include/asm/emulate_prefix.h