Re: [PATCH v2 3/6] media: uvcvideo: Return -EIO for control errors

[Ricardo Ribalda Delgado]

Hi Laurent

On Fri, Mar 12, 2021 at 12:30 AM Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Ricardo,
>
> On Thu, Mar 11, 2021 at 11:59:27PM +0100, Ricardo Ribalda Delgado wrote:
> > On Thu, Mar 11, 2021 at 11:53 PM Laurent Pinchart wrote:
> > > On Thu, Mar 11, 2021 at 11:19:43PM +0100, Ricardo Ribalda wrote:
> > > > The device is doing something unspected with the control. Either because
> > > > the protocol is not properly implemented or there has been a HW error.
> > > >
> > > > Fixes v4l2-compliance:
> > > >
> > > > Control ioctls (Input 0):
> > > >                 fail: v4l2-test-controls.cpp(448): s_ctrl returned an error (22)
> > > >         test VIDIOC_G/S_CTRL: FAIL
> > > >                 fail: v4l2-test-controls.cpp(698): s_ext_ctrls returned an error (22)
> > > >         test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
> > > >
> > > > Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
> > >
> > > The change looks good to me.
> > >
> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > >
> > > Which of the error codes below do you get with your camera, and for
> > > which control ?
> >
> > Bus 001 Device 003: ID 05c8:03a2 Cheng Uei Precision Industry Co., Ltd
> > (Foxlink) XiaoMi USB 2.0 Webcam
> >
> > info: checking extended control 'White Balance Temperature' (0x0098091a)
> > Control error 7
> > info: checking extended control 'Exposure (Absolute)' (0x009a0902)
> > Control error 6
>
> :-S And what's the request (GET_CUR, GET_INFO, ...) ?

Failed to query (SET_CUR) UVC control 10 on unit 2: -32 (exp. 2).
Failed to query (SET_CUR) UVC control 4 on unit 1: -32 (exp. 4)
>
> > > > ---
> > > >  drivers/media/usb/uvc/uvc_video.c | 5 +++++
> > > >  1 file changed, 5 insertions(+)
> > > >
> > > > diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
> > > > index f2f565281e63..25fd8aa23529 100644
> > > > --- a/drivers/media/usb/uvc/uvc_video.c
> > > > +++ b/drivers/media/usb/uvc/uvc_video.c
> > > > @@ -112,6 +112,11 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit,
> > > >       case 5: /* Invalid unit */
> > > >       case 6: /* Invalid control */
> > > >       case 7: /* Invalid Request */
> > > > +             /*
> > > > +              * The firmware has not properly implemented
> > > > +              * the control or there has been a HW error.
> > > > +              */
> > > > +             return -EIO;
> > > >       case 8: /* Invalid value within range */
> > > >               return -EINVAL;
> > > >       default: /* reserved or unknown */
>
> --
> Regards,
>
> Laurent Pinchart



-- 
Ricardo Ribalda