[PATCH 1/3] arm64: dts: qcom: sm8150: add other QUP nodes

[Caleb Connolly]

Add the first and third qupv3 nodes used to hook
up peripherals on some devices.

Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index e5bb17bc2f46..03e05d98daf2 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -577,6 +577,18 @@ gcc: clock-controller@100000 {
 				 <&sleep_clk>;
 		};
 
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+		};
+
 		qupv3_id_1: geniqup@ac0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x00ac0000 0x0 0x6000>;
@@ -598,6 +610,19 @@ uart2: serial@a90000 {
 			};
 		};
 
+		qupv3_id_2: geniqup@cc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00cc0000 0x0 0x6000>;
+
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+		};
+
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sm8150-config-noc";
 			reg = <0 0x01500000 0 0x7400>;
-- 
2.29.2