Re: [PATCH v4 2/3] dt-bindings: mtd: Add a property to declare secure regions in NAND chips

[Boris Brezillon]

On Mon, 8 Mar 2021 19:01:34 +0530
Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> wrote:

> On Mon, Mar 08, 2021 at 10:10:59AM +0100, Boris Brezillon wrote:
> > On Mon,  8 Mar 2021 11:14:46 +0530
> > Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> wrote:
> >   
> > > On a typical end product, a vendor may choose to secure some regions in
> > > the NAND memory which are supposed to stay intact between FW upgrades.
> > > The access to those regions will be blocked by a secure element like
> > > Trustzone. So the normal world software like Linux kernel should not
> > > touch these regions (including reading).
> > > 
> > > So let's add a property for declaring such secure regions so that the
> > > drivers can skip touching them.
> > > 
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > > ---
> > >  Documentation/devicetree/bindings/mtd/nand-controller.yaml | 7 +++++++
> > >  1 file changed, 7 insertions(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > > index d0e422f4b3e0..15a674bedca3 100644
> > > --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > > +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > > @@ -143,6 +143,13 @@ patternProperties:
> > >            Ready/Busy pins. Active state refers to the NAND ready state and
> > >            should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
> > >  
> > > +      secure-regions:
> > > +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > > +        description:
> > > +          Regions in the NAND chip which are protected using a secure element
> > > +          like Trustzone. This property contains the start address and size of
> > > +          the secure regions present.
> > > +  
> > 
> > Since you declare this as a generic property, I think it'd be simpler
> > to do the check at the core level.
> >   
> 
> Hmm, so have the parsing logic in qcom driver and check in core or both parsing
> and check in core?

Both in the core.